What are the starting and parking steps for the Tiguan L?
1 Answers
The correct starting and parking procedures for the Tiguan L are as follows: 1. Starting: Turn on the ignition without starting the engine, wait for the self-check to complete, shift to N gear, start the ignition, and release the electronic parking brake; 2. Parking: Shift to N gear, wait for the vehicle to come to a complete stop, then engage the electronic parking brake (on a slope, you can directly engage the electronic parking brake while holding the brake), finally turn off the engine in N gear, and then shift to P gear. Detailed instructions are as follows: I. Starting Method: 1. Turn the ignition key to the second position, to the power position, allowing the car's computer system to begin self-checking for at least 6 seconds; 2. Press the foot brake, shift the gear from P to N (if reversing, start the ignition directly in P gear); 3. Release the foot brake, turn the ignition key to the ignition position to start the engine (the warm-up time depends on the vehicle model and environmental temperature, but avoid sudden acceleration and braking in low temperatures, allowing the RPM to naturally return to around 1000); 4. Press the foot brake, release the handbrake, shift the gear from N to D (if starting on a slope, to prevent rolling back, first shift from N to D, lightly press the accelerator, and slowly release the handbrake for a smooth start); 5. Slowly release the foot brake and start; 6. Then, depending on road conditions, smoothly press the accelerator to speed up and drive safely. II. Parking Method: 1. Press the foot brake to stop the vehicle; 2. Shift the gear from D to N; 3. Engage the handbrake and turn off the engine; 4. Release the foot brake but do not turn off the power (to ensure the vehicle is completely stopped under the handbrake's effect, preventing P gear lock); 5. Press the foot brake, shift the gear from N to P; 6. Release the foot brake; 7. Turn the key back, turn off the power, and remove the key.
