What are the standards for adjusting car auto-dimming mirrors?

How to Check the Transmission Fluid Level in a Sylphy?

Nissan Sylphy CVT transmission fluid level inspection method: Use a hexagon tool to remove the fluid level screw deep inside the drain port, and fluid will flow out. The Nissan Sylphy transmission requires 3 to 4 liters of fluid, and the transmission fluid must not be misused or mixed with automatic transmission fluid. Below is extended information about transmission fluid: 1. Over time, transmission fluid viscosity becomes thinner, leading to decreased lubrication performance, reduced sealing capability, increased resistance and wear, resulting in unstable pressure and affecting hydraulic system operation accuracy. 2. Transmission control precision decreases, shift accuracy reduces, affecting smoothness and response speed. Deteriorated fluid has reduced cooling and anti-oxidation performance, causing issues like excessive oil temperature, creating a vicious cycle that further shortens fluid and transmission component lifespan. 3. Automatic transmission fluid should be replaced every 60,000-80,000 km or 2-3 years. Failure to replace the automatic transmission fluid promptly directly impacts vehicle performance, fuel consumption, and even the automatic transmission's service life.

14

5

Share

Can I Upload If I Fail the Physical Exam for Driver's License Renewal?

You cannot upload if you fail the physical exam for driver's license renewal. If a motor vehicle driver's physical condition changes and they fail the physical exam, making them ineligible for their current permitted driving category, they must apply to the vehicle management office to downgrade their permitted driving category. According to Article 61 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," if a motor vehicle driver's physical condition changes and they no longer meet the requirements for their current permitted driving category but still meet the requirements for another permitted category, they must apply to the vehicle management office at the place where the license was issued or another location within 30 days to downgrade their permitted driving category. When applying, they must fill out an application form and submit the driver's identity proof, motor vehicle driving license, and a medical certificate from a county-level or higher medical institution or a military medical institution at the regimental level or above. If a motor vehicle driver's physical condition changes and they no longer meet the requirements specified in Article 12, Paragraph 2, or fall under any of the circumstances listed in Article 13, making them unfit to drive, they must apply to the vehicle management office at the place where the license was issued within 30 days to cancel their license. When applying, they must fill out an application form and submit the driver's identity proof and motor vehicle driving license.

7

5

Share

What is the reason for being stuck in fifth gear and unable to shift out?

It may be caused by excessive gear clearance in the car's transmission leading to gear jamming. The following is a relevant introduction about gear shifting: 1. Shifting timing: Gear shifting should be timely, correct, smooth, and quick. When starting the car, generally use the low gear (first gear) to start. After starting, as long as road conditions permit, quickly and timely shift up to higher gears step by step. Generally speaking, higher gears are more fuel-efficient than lower gears. Therefore, after starting, shift up in time and avoid driving in a gear that is too low for the speed. Do not use high gears to force driving on slopes or when the speed is reduced; nor is it allowed to use lower gears for long periods under good road conditions. 2. Pay attention to coordination: When shifting gears, pay attention to the coordinated operation of the clutch pedal, throttle, and gear lever. The gear lever must be pushed firmly into place during shifting to ensure complete gear engagement, to avoid damaging the gears or the transmission automatically disengaging while driving. The key to upshifting lies in increasing the speed before shifting up. The throttle should be 'steadily increased' and 'quickly released'. After starting in first gear, you can shift to second gear without 'accelerating suddenly'; when shifting from second to third gear, gently press the throttle to shift to third gear. In subsequent upshifting processes, the degree of throttle pressing gradually increases, but excessive acceleration should also be avoided.

5

4

Share

What is the fuel consumption of the 10th-generation Civic 1.5t?

The 10th-generation Civic 1.5t has six models currently on sale. Among them, the Civic 2022 240TURBO-CVT Burning Edition, Burning Sport Edition, and Dynamic Control Edition, equipped with a 182-horsepower engine, have an NEDC fuel consumption of 5.9L per 100km. The Civic 2022 240TURBO-CVT Dynamic Edition, equipped with a 182-horsepower engine, has an NEDC fuel consumption of 5.8L per 100km. The Civic 2022 180TURBO-CVT Noble Edition, equipped with a 182-horsepower engine, has an NEDC fuel consumption of 5.7L per 100km. The Civic 2022 180TURBO-CVT Noble Sport Edition, equipped with a 182-horsepower engine, has an NEDC fuel consumption of 5.5L per 100km. All models of the 10th-generation Civic 1.5t have the same fuel tank capacity. The distance that can be covered on a full tank of fuel is as follows: Models equipped with a 182-horsepower engine have a fuel tank capacity of 47L, and the distance that can be covered on a full tank is 47/5.9*100=797km. Models equipped with a 182-horsepower engine have a fuel tank capacity of 47L, and the distance that can be covered on a full tank is 47/5.8*100=810km. Models equipped with a 182-horsepower engine have a fuel tank capacity of 47L, and the distance that can be covered on a full tank is 47/5.7*100=825km. Models equipped with a 182-horsepower engine have a fuel tank capacity of 47L, and the distance that can be covered on a full tank is 47/5.5*100=855km. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Cars with greater weight will also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

15

3

Share

What to Pay Attention to with ETC?

ETC is the abbreviation for Electronic-Toll-Collection, meaning electronic toll collection system. ETC can be applied for at bank branches, highway service areas, and other institutions. The following documents are required: the original and photocopy of the vehicle owner's valid ID card and vehicle license. If the application is made by a proxy, the proxy's valid ID card is also needed. The photocopy of the vehicle license should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway toll fees is required. The applicant must be between 18 and 60 years old, and the vehicle must be registered under the individual's name. Regarding ETC installation precautions: Do not obstruct the driver's view; it is best to install it behind the rearview mirror: Many car models have a steeply angled windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Avoid affecting charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield will press the lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To avoid issues caused by the vehicle ahead's ETC device malfunctioning, maintain a distance of at least 10 meters to prevent automatic toll deduction for the vehicle ahead. The ETC lane recognition speed is 20 km/h; exceeding this speed may result in failed fee deduction due to unreadable vehicle information. If using a debit card linked to ETC, insufficient balance may also cause deduction failure. Precautions for using the ETC card: Before passing through an ETC toll gate, ensure the ETC card is correctly inserted into the OBU (On-Board Unit). During driving, bumps may loosen the card, so check it promptly and reinsert it if necessary. The ETC card is vehicle-specific and cannot be swapped arbitrarily after being bound to a vehicle. Before using ETC, check the fee information displayed on the dedicated lane sign. If the card balance is insufficient, recharge it promptly. If the barrier does not lift when passing through an ETC lane, follow the instructions of toll station staff or switch to a manual toll lane. If the ETC lane is temporarily closed, use the manual toll lane for payment. The speed limit for ETC lanes is 20 km/h, and a minimum distance of 5 meters should be maintained from the vehicle ahead. If an ETC vehicle receives a toll card in a manual toll lane, it cannot use the ETC lane upon exiting the highway and must use the manual toll lane instead.

5

2

Share

What does the blue sky and white clouds logo mean?

The blue sky and white clouds logo refers to the emblem of BMW. Here is some relevant information about BMW: 1. Logo meaning: The logo represents the state flag of Bavaria, Germany, as this state is the birthplace of BMW. The original prototype of the logo represents the propeller of an airplane, combining the state flag with the airplane propeller. 2. Brand introduction: BMW is a German automobile manufacturer that started by producing aircraft engines before transitioning to car manufacturing. BMW offers a wide range of luxury sedans and SUVs, as well as many sporty high-performance cars. Additionally, BMW has achieved remarkable success in motorsports.

9

1

Share

What are the standards for adjusting car auto-dimming mirrors?

How to Check the Transmission Fluid Level in a Sylphy?

Can I Upload If I Fail the Physical Exam for Driver's License Renewal?

What is the reason for being stuck in fifth gear and unable to shift out?

What is the fuel consumption of the 10th-generation Civic 1.5t?

What to Pay Attention to with ETC?

What does the blue sky and white clouds logo mean?

What does GAC mean?

What are the hazards of low tire pressure in motor vehicles?

How to Use Skoda Cruise Control?

What is the abbreviation for Guangzhou license plates?