What are the standards and requirements for straight-line driving in Subject 3?

3 Answers
ElizaAnn
07/24/25 4:04am
Here is an introduction to the standards for Subject 3: 1. Unstable direction control: Failure to maintain straight-line driving will result in a deduction of 100 points. 2. Failure to take timely deceleration measures when encountering braking by the vehicle ahead: A deduction of 100 points. Below is an introduction to the assessment requirements: 1. During straight-line driving: The candidate must achieve a smooth start and maintain a basically orderly driving operation sequence. 2. Ability to correctly handle the steering wheel: The candidate should be able to use the free play of the steering wheel to correct the driving direction. Additional information: Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviated name for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving.
Was this review help?
6
3
Share
SanOwen
08/10/25 10:13pm
When practicing the straight-line driving section for my driving test, I found the requirements quite clear. The car must maintain a straight line on the straight road without veering left or right. The steering wheel should be held lightly—not too tight or too loose. The speed should steadily stay between 30 to 40 km/h; too fast and the car may drift, too slow and the examiner might urge you to speed up. I remember the examiner said to look far ahead at the end of the road, not down at the hood, or else it's easy to deviate. I once made a mistake: I turned the wheel too much, almost crossing the line, but luckily corrected it in time with small adjustments. During practice, I recommend finding an open road to practice multiple times to develop a sense of direction. Don’t be too nervous—just focus your eyes straight ahead, and you’ll pass. This is a crucial safety foundation; carelessness is not an option. Passing it feels incredibly satisfying.
Was this review help?
4
2
Share
Expand All
FranciscoLee
09/24/25 5:02am
When instructing students to practice the third driving test, I always remind them of the key points for driving in a straight line: the vehicle must move straight in the exact center of the lane, with minimal steering wheel movement—basically keeping it still and making slight adjustments with just the fingertips. Maintain a steady speed between 30 to 40 km/h. A common mistake is students overcorrecting the steering, making large adjustments that cause the car to weave in an S-shape, which often leads to failure. My advice is to focus your eyes on a point 50 meters ahead, avoiding looking around, as this helps stabilize the direction. During practice, try simulating on a wide road, using a straight lane line as a reference. Remember, stay relaxed, keep your hands flexible, and make minor corrections as needed. Passing this step demonstrates basic vehicle control ability.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

Do you need to use AC in car air conditioning in winter?

Car air conditioning does not require the use of AC in winter. The warm air in winter comes from the heat generated by the engine during operation. When the engine's cooling system dissipates heat from the engine, the dissipated heat is blown into the car through a fan, forming warm air. When the warm air is not in use, the fan stops, and the warm air outlet closes, causing the dissipated heat to completely disperse into the atmosphere. When the AC button inside the car is turned on, the entire car air conditioning's evaporator is activated accordingly. When the evaporator is in operation, its temperature is relatively low. As air passes through the evaporator, the water vapor inside is rapidly cooled into water droplets. If the air passes through the evaporator and then is heated by the warm air exchanger, the hot air blown into the car will be drier, making it less likely for the car windows to fog up.
12
2
Share

What is the button below the rearview mirror in the car?

In basic trim models, it switches to the night anti-glare mode, while in higher trim models, it turns the rearview camera function on or off. The reversing camera system displays real-time images from the rearview camera, providing the driver with a clear view of the environment behind the vehicle, facilitating parking and reversing. Relevant information about the rearview mirror heating function is as follows: 1. Symbol: The rearview mirror heating symbol is a curved upward arrow paired with a rectangle. The location of the rearview mirror heating switch varies among different car models, but the symbols are generally similar. 2. Working principle: A heating element (heating film) is installed inside the lenses of both side rearview mirrors. In rainy or snowy weather, when the driver activates the rearview mirror heating function, the heating element quickly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius, thereby heating the mirror surface to remove fog and frost.
7
5
Share

Why Do Diesel Vehicles Emit Black Smoke?

Diesel vehicles emit black smoke due to the following reasons: 1. Incomplete combustion of vehicle fuel; 2. Uneven fuel supply within the cylinder; 3. Poor atomization effect during diesel combustion, resulting in insufficient fuel supply to the cylinder; 4. Insufficient air intake by the inhalation system. Black smoke emission from the engine can lead to increased fuel consumption, reduced power output, and the accumulation of a large amount of carbon deposits on components such as pistons, piston rings, and valves. Black smoke, also known as soot, is generated because diesel engines undergo non-homogeneous combustion, where the chemical reaction conditions vary across different regions of the combustion chamber and change over time. Therefore, black smoke is likely produced through various pathways. Diesel is a complex hydrocarbon, and unburned diesel injected into the combustion chamber decomposes under high temperatures, forming carbon black. This carbon black is expelled along with the exhaust gases, creating black smoke. Black smoke is a product of incomplete combustion, formed when hydrocarbons undergo pyrolysis under high-temperature, oxygen-deficient conditions and subsequently polymerize.
17
4
Share

Is It Normal for the Car's Center Console to Get Hot?

It is not normal for the car's center console to get hot, as it may indicate wiring issues. It is recommended to visit a repair shop or a 4S store for inspection and maintenance. The car's center console is the area that controls comfort and entertainment devices such as the air conditioning and audio system. Its functions include central control, speed control, and individual control. The button functions on the car's center console include: 1. Electronic Stability Program (ESP); 2. Hazard Warning Light; 3. Parking Radar and Camera; 4. Internal and External Air Circulation System; 5. Temperature Zone Synchronization Function. The method to remove the car's center console is as follows: 1. Remove the air conditioning control module; 2. Use a plastic pry tool to loosen the upper cover panel of the center console; 3. Remove the upper cover panel of the center console; 4. Use a plastic pry tool to loosen the air vents on the center console; 5. Remove the air vents to complete the disassembly.
7
1
Share

Should the car data cable be unplugged?

Leaving the car charger plugged into the cigarette lighter won't affect the battery. Firstly, the car charger uses a series-switching regulated power supply, which remains powered off when no charging device is connected. Additionally, its static current is only about 1-2mA, causing no impact whatsoever. Relevant information about car Bluetooth is as follows: 1. Function: After successful Bluetooth pairing, you can use your phone to play audio files, answer calls, making it very convenient to use. While driving, it ensures driving safety. Once the car's infotainment system is connected to the Bluetooth system, you can make calls directly through the infotainment system in hands-free mode. 2. Automatic connection: Once your phone is connected to the car's infotainment system, it will automatically reconnect upon subsequent use, provided the phone's Bluetooth system is turned on. There's no need for frequent reconnections, saving time and adding convenience to vehicle use. However, when using Bluetooth calls, be mindful of privacy concerns.
3
1
Share

How to eliminate the immediate vehicle condition check prompt in Magotan?

The method to eliminate the immediate vehicle condition check prompt in Magotan is: First turn off the ignition switch, press and hold the zero reset button, then turn the ignition switch to the ACC position, release the button, press and hold the button at the lower left corner of the instrument panel until the screen goes black, then turn on the ignition switch again, and wait until "INSP" flashes 5 times. Taking the Magotan 2020 280TSI DSG Leading model as an example, it is a mid-size 4-door 5-seater sedan with a length of 4865mm, width of 1832mm, height of 1471mm, wheelbase of 2871mm, and a top speed of 208km/h. The engine of this model has a maximum torque of 250 N·m, with the maximum torque range between 1750 to 3000 rpm.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.