What are the standard tires for the Audi A6L?

1 Answers
ArthurFitz
07/24/25 7:19pm
The 2019 Audi A6L comes equipped with three tire sizes, all factory-installed tires are from the Goodyear brand. The tire models are 225/55R18, 245/45R19, and 255/40R20. Goodyear, officially known as The Goodyear Tire & Rubber Company, was founded in 1898 in the United States and has over a century of history. Goodyear is the world's largest tire manufacturing company, headquartered in Akron, Ohio, USA. The company primarily produces tires, engineered rubber products, and chemical products in over 90 factories across 28 countries. Goodyear also specializes in designing and producing matching tires and related equipment for many top international car manufacturers. International automotive brands that use Goodyear tires include Rolls-Royce, Mercedes-Benz, BMW, Audi, Volkswagen, General Motors, Ford, Chrysler, and Lexus, among others. The parameters on the tires have the following meanings: the first number represents the tire's width, the second number represents the aspect ratio, and the third number represents the diameter suitable for the wheel hub. Taking 225/55R18 as an example, these numbers mean: 225 indicates the tire's section width in millimeters, generally ranging between 145—285mm, with intervals of 10mm; 55 is the aspect ratio, which is the ratio of the tire's sidewall height to its section width, representing 55%. Typically, tire aspect ratios range between 30%—80%. Under normal circumstances, ordinary sedans should not use tires with an aspect ratio greater than 75%, while luxury cars and high-performance sports cars are recommended to use tires with an aspect ratio <60%; R stands for Radial, indicating the tire has a radial structure, and 15 is the wheel hub's outer diameter in inches.
Was this review help?
14
5
Share
More Forum Discussions

What is the speed limit on highway auxiliary roads?

Highway auxiliary roads have a speed limit of 40 km/h. Below are specific details about highway speed limits: 1. Regulations: According to the Road Traffic Safety Law, the maximum speed for passenger cars on highways must not exceed 120 km/h, while other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h. 2. How long does it take to detect speeding: Speeding violations on highways are typically recorded and can be checked online within 3 to 7 days, with the latest not exceeding 13 working days. However, if the speeding violation occurs outside of highways (e.g., in another region), it may take about 2 to 3 weeks to be recorded and checked.
12
4
Share

Should You Call the Police If Your Car Breaks Down on the Highway?

If your car breaks down on the highway, you can call the police or dial 122 for road rescue. Here are some precautions to take when your vehicle breaks down on the highway: 1. Turn on the hazard lights: If your vehicle is unable to move due to a malfunction or accident and cannot leave the driving lane, immediately turn on the hazard warning lights and set up a warning sign 150 meters behind the vehicle. At night, also turn on the width marker lights and taillights. 2. Emergency avoidance: If your car breaks down on the highway and requires repairs, even if you are repairing it on the shoulder or in the parking lane, it is not absolutely safe. The driver should remain vigilant and take emergency avoidance measures immediately upon noticing any danger, moving to the safe area outside the guardrail on the shoulder. When returning to the driving lane after repairs, first accelerate on the emergency parking lane, turn on the left turn signal, and then merge into the driving lane without obstructing other normally moving vehicles.
7
1
Share

How to Fold Down the Rear Seats in the Sylphy?

Steps to fold down the rear seats in the Sylphy: 1. Open the rear door behind the driver; 2. Pull the trunk release switch; 3. Open the trunk; 4. Pull the rear seat unlock button; 5. Move the rear seat to fold it down. The Sylphy is a compact car under Dongfeng Nissan, with dimensions of 4641 mm in length, 1815 mm in width, and 1450 mm in height, and a wheelbase of 2712 mm. In terms of power, the Sylphy is equipped with a naturally aspirated engine that delivers a maximum horsepower of 135 hp, a maximum torque of 159 Nm, and a maximum power output of 99 kW.
2
4
Share

What is the difference between high-speed motors and low-speed motors?

The differences between high-speed motors and low-speed motors are as follows: 1. Different design perspectives: From a design perspective, high-speed motors have a small rotor diameter and a large length; low-speed motors have a large rotor diameter and a small length. A smaller diameter means a relatively smaller linear speed of the rotor's outer diameter, and the centrifugal force on the embedded windings during high-speed rotation is relatively small, making them suitable for high-speed operation. Here, high-speed specifically refers to tens of thousands of revolutions, while general motors operate at a few thousand revolutions, which does not reflect this design concept. 2. Different motor power: Due to the high speed, high-speed motors have a high power density, and their volume is much smaller than that of low-speed motors, effectively saving materials. 3. Different efficiency: High-speed motors are directly connected to the prime mover, eliminating the traditional speed reduction mechanism, resulting in high transmission efficiency and low noise; low-speed motors produce more noise.
9
0
Share

What Causes a Car to Stall?

Reasons for car stalling: 1. Electrical circuit failure - This may occur due to low-voltage power interruption during driving, causing the engine to stall. In this case, you should primarily check the ignition and starter switches as well as the fuse box; 2. Short circuit in low-voltage wiring causing stalling - This situation requires inspection of the low-voltage circuits; 3. Component failure - This issue is usually related to faults in the ignition coil, capacitor, or electronic ignition module; 4. Fuel system failure - Damage to the fuel pump, fuel line rupture, clogged carburetor fuel inlet, or empty fuel tank can cause stalling, though the car may still be restarted with difficulty in such cases; 5. Ignition system failure - Problems with the engine overheating or the anti-knock system can also lead to stalling.
2
4
Share

How to Customize a License Plate Number?

License plate number customization method: 1. Enter the vehicle type, ID number, and the vehicle's VIN, then select the region; 2. Customize the license plate number in the system, which usually offers numbers and letters to choose from. After selecting a satisfactory license plate number, press confirm and proceed with other formalities. The self-service license plate customization system is installed on self-service touchscreens in the DMV service hall. The search, query, and license plate confirmation are all completed independently by the vehicle owner. Therefore, vehicle owners should follow the instructions when selecting their license plate numbers. Once the customized license plate number is confirmed by the owner, it is automatically uploaded to the DMV's vehicle registration system and cannot be changed. Vehicle owners should avoid input errors.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.