What are the speeds for gears 1 to 4?

1 Answers
Dale
07/29/25 11:30am
First gear speed is generally around 10 kilometers per hour, second gear speed is around 20 kilometers per hour, third gear speed ranges from 20-40 km/h, and fourth gear speed ranges from 40-60 km/h. Below is some related information about gears: Introduction to gears: The gear positions of a car, also known as the transmission, refer to the automotive device used to change gear sizes. Car gears are divided into automatic transmission gears and manual transmission gears. Automatic transmission gears include P, R, N, D, 1, or L. The function of gears: While driving, shifting gears allows the engine to operate at its optimal performance state. All driving conditions have corresponding shift points, with the ultimate goal of reducing fuel consumption.
Was this review help?
2
2
Share
More Forum Discussions

Why does the new RAV4 not display tire pressure monitoring?

Here are the reasons why the new RAV4's tire pressure monitoring is not displayed: 1. If there is a static response but no signal while driving, it may be due to low transmission strength or insufficient receiver sensitivity. If there is no static response and pairing fails, the transmitter is faulty. 2. Low signal transmission strength can cause this issue, which can often be resolved by changing the placement position. 3. It might be a trade-off between battery life and product stability, where battery life is prioritized by reducing sensor power consumption, leading to lower transmission strength and reduced anti-interference performance. 4. The module's battery may be depleted, usually requiring a complete replacement of the tire pressure monitoring module. If the module's inspection port is blocked, the module cannot perform detection. 5. Pairing failure, requiring re-pairing—some models can do this independently, but most require professional pairing at a 4S shop. If the module is damaged, it must be replaced with a new one.
13
5
Share

What type of fire extinguisher is better for cars?

Dry powder fire extinguishers and water-based fire extinguishers are better for cars. Dry powder fire extinguishers extinguish fires quickly and have low costs, while water-based fire extinguishers are pollution-free and harmless to humans. Fire extinguishers are portable firefighting equipment containing chemicals inside. In case of a fire caused by high temperatures, car malfunctions, or short circuits, a fire extinguisher can be used to put out the fire, ensuring personal safety and reducing losses. The method of using a fire extinguisher is as follows: 1. Pick up the fire extinguisher and position yourself upwind; 2. Turn the fire extinguisher upside down several times to loosen the dry powder inside; 3. After removing the safety pin, hold the handle with your left hand and the nozzle with your right hand, then invert and stand the fire extinguisher upright; 4. Aim the nozzle at the base of the flame and spray.
3
2
Share

How to reset the maintenance indicator light on Roewe RX5?

Here is the method to reset the maintenance light for Roewe 550: 1. Select the maintenance light reset function in V10.42 or later version, choose domestic brands, select Roewe, and then select the software reset option. 2. Choose the maintenance cycle reset, refer to the prompt information, and select "Confirm". 3. Follow the prompt information to operate. There are two methods: automatic completion and manual completion. Select "Yes" for automatic completion; select "No" to display the input interface, and enter the last maintenance date of the instrument according to the prompt information. 4. Note that you still need to enter the year next. 5. After selecting "Confirm", the message "SIA warning light has been reset. Please turn the ignition switch to OFF, wait for 5 seconds, and then turn the ignition switch to ON to complete the process" will be displayed.
4
5
Share

What Material is the Bumper Made Of?

Bumpers are generally made of plastic. Here are the relevant introductions: 1. Relatively low cost: For automakers, reducing vehicle production costs is also very important, so many automakers choose to use plastic bumpers, allowing funds to be invested in the research and development of other components to provide consumers with better services. 2. Vehicle lightweighting: Plastic bumpers are lighter than metal ones, helping to achieve the goal of vehicle lightweighting, and also enabling car owners to save fuel and reduce emissions while driving. 3. Beneficial for pedestrian safety: In the event of a traffic accident while the vehicle is in motion, plastic bumpers can better protect pedestrians. Plastic bumpers have excellent impact resistance, reducing the harm caused by car bumpers to pedestrians. 4. Plastic bumpers are less prone to rust: Compared to metal bumpers, plastic bumpers perform better in terms of rust resistance, helping to save corresponding vehicle maintenance costs.
16
1
Share

Can You Start the Car While the Battery Is Charging?

You cannot start the car while the battery is charging. If you attempt to start the vehicle while it is being charged with a charger, the charger may be damaged. Therefore, this is an incorrect practice and is not recommended. Below is additional information: 1. The vehicle relies on the battery's power supply during the instant of starting. After starting the car and letting it idle, the electricity used comes from the generator, not the battery. The generator's electricity can only be used for driving or idling and cannot charge the battery. 2. Attempting to charge the car battery by starting the vehicle is ineffective, unreliable, and results in 'false charging.' It also wastes fuel and is unsafe. The best method for battery maintenance is to use a battery charger correctly, prioritizing safety. If the car is not started for an extended period, the battery clamps should be removed, and the battery should be sent for charging periodically.
3
5
Share

How to Determine if the Clutch Disc Needs Replacement?

Methods to determine if the clutch disc needs replacement are: 1. With the car in 1st gear, press the brake or engage the handbrake, and release the clutch to start. If the car does not stall suddenly, the clutch disc needs replacement; 2. When the clutch pedal inside the car becomes higher, the clutch disc needs replacement; 3. Replace the clutch disc when it is excessively worn, leading to insufficient power when climbing hills. Severe effects of a worn clutch disc include: 1. Car slipping and insufficient power; 2. Difficulty starting the car and ignition problems; 3. Poor hill-climbing performance and increased fuel consumption. The functions of the clutch disc are: 1. Facilitating car starting; 2. Preventing damage from excessive transmission system pressure; 3. Reducing torsional vibration impact.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.