What are the speed ranges for manual transmission gears 1-5?
2 Answers
Manual transmission gears 1-5 speed ranges are as follows: 1. 1st gear: Used for normal starting or climbing very steep slopes, with a speed of approximately 10 km/h; 2. 2nd gear: Used for acceleration after starting or low-speed driving, with a speed of around 20 km/h; 3. 3rd gear: Speed ranges from 20 to 40 km/h, commonly used for city driving; 4. 4th gear: Speed ranges from 40 to 60 km/h; 5. 5th gear: Speed is around 60 km/h. Additional relevant information: Note: The key to driving a manual transmission vehicle is mastering the timing of gear shifting. Shift gears when the engine speed is around 2000 RPM, first reduce the throttle and then depress the clutch to avoid forced disengagement of the clutch, then proceed to shift gears.
I've been driving manual transmission cars for several years, and speed is definitely not a fixed thing. The speed in each gear depends on the engine RPM and the type of vehicle, so it can't be generalized. For example, when starting in 1st gear with a typical small car, the RPM ranges from 1000 to 3000, and the speed is roughly between 10 to 25 km/h. In 2nd gear, accelerating to 2000 to 4000 RPM, the speed might be between 20 to 50 km/h. For daily driving in 3rd gear, the RPM is usually between 1500 to 3500, covering speeds from 40 to 70 km/h. In 4th gear for highway cruising, the RPM is lower at 1500 to 3000, with speeds often between 70 to 100 km/h. 5th gear, as an overdrive gear, operates below 2000 RPM, allowing speeds above 100 km/h, but this varies based on engine power and road conditions. An empty car runs faster, while a loaded one moves slower, especially noticeable when climbing hills. It's best to shift gears based on the tachometer, maintaining 2000 to 3000 RPM for fuel efficiency and smooth driving, and avoid pushing the engine at high RPMs to prevent damage.
