What are the speed ranges for gear shifting in Subject 3?

1 Answers
VonLillian
07/30/25 2:04am
Subject 3 gear shifting speed ranges are: shifting from first to second gear should occur at 15 to 20 km/h; shifting from second to third gear should occur at 25 to 30 km/h; shifting from third to fourth gear should occur at 35 to 40 km/h; and shifting from fourth to fifth gear should occur at 45 to 50 km/h. Introduction to Subject 3: 1. Exam content: The road driving skills test for Subject 3 generally includes: vehicle preparation, light simulation test, starting, driving straight, gear shifting operations, lane changing, parking by the roadside, driving straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. 2. Exam difficulties: In the Subject 3 test, it is explicitly required that the distance for parking by the roadside should not exceed 30 cm, but this distance is difficult for students to grasp, and many students park too far from the roadside.
Was this review help?
10
4
Share
More Forum Discussions

Where is the computer connector of BAIC Weiwang m20?

The computer connector of BAIC Weiwang m20 is located under the co-pilot blower. The computer connector is called the OBD interface, and its function is to detect the engine electronic control system, vehicle function modules, and exhaust treatment system during the operation of the car. BAIC Weiwang m20 is a microvan with a body size of 4440mm in length, 1700mm in width, 1783mm in height, and a wheelbase of 2790mm. BAIC Weiwang m20 is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, with a maximum power of 85 kW and a maximum torque of 150 Nm. Its drive mode is front-engine rear-wheel drive, with MacPherson independent suspension in the front and leaf spring suspension in the rear.
6
3
Share

Where is the air conditioning filter located in the Teramont?

The air conditioning filter in the Teramont is located behind the glove box. Here is some relevant information: 1. The car's air conditioning filter is a component that needs to be replaced regularly. Generally, it should be replaced every 10,000 kilometers. The air conditioning filter is an important part of the air conditioning system, as it filters the air. 2. If the air conditioning filter is not replaced for a long time, it will affect the performance of the car's air conditioning and the health of the passengers. If the air quality in your area is relatively poor, you can choose a product that can filter PM2.5 when replacing the air conditioning filter, so you don't have to worry even when using the external air circulation. When purchasing an air conditioning filter, always choose genuine products from well-known brands and ensure the model is compatible with your car.
3
0
Share

Where is the USB port in the Chevrolet Cruze?

The USB port in the Chevrolet Cruze is located inside the center console (the box between the two front seats). The functions of the USB port include: 1. Charging mobile devices; 2. Connecting external storage devices to play music; 3. Synchronizing with communication devices if the navigation system supports connectivity. Taking the 2018 Chevrolet Cruze as an example, it is a compact car with a body length of 4666mm, width of 1807mm, height of 1460mm, and a wheelbase of 2700mm. The fuel tank capacity is 52 liters, and the curb weight is 1240kg. This model is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 114PS, maximum power of 84kW, and maximum torque of 146Nm, paired with a 6-speed manual transmission.
3
5
Share

What kind of engine oil should be used for turbocharged engines?

Turbocharged engines use fully synthetic engine oil. Turbocharging is an air compressor that increases intake air volume by compressing air. It utilizes the inertial impulse of exhaust gases from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller pressurizes the air delivered through the air filter pipeline, forcing it into the cylinders. The maintenance methods for turbocharged engines are: 1. After starting the car engine, do not press the accelerator pedal abruptly; 2. After the engine has been running at high speed for a long time, do not turn it off immediately; 3. Choose the appropriate engine oil; 4. Regularly clean the engine oil and filter; 5. Clean the air filter on time; 6. Regularly check the sealing rings of the turbocharger; 7. Regularly clean the air filter; 8. Regularly inspect the lubrication oil pipes and joints.
16
3
Share

What engine is used in the Middle East version of the Prado?

The Middle East version of the Prado is equipped with a 2.7L naturally aspirated engine and a 4.0L naturally aspirated engine. The Middle East version of the Prado is a mid-to-large size 5-door, 5-seat SUV with body dimensions of: length 4780mm, width 1885mm, height 1845mm, and a wheelbase of 2790mm. The Middle East version of the Prado is paired with a 4-speed automatic transmission, delivering a maximum power of 120 kW at 5200 rpm and a maximum torque of 246 Nm at 3800 rpm. It features a front-engine, four-wheel-drive layout, with a front suspension using a double-wishbone independent suspension and a rear suspension using a four-link solid axle non-independent suspension.
11
4
Share

What is the NCD light in China VI vehicles?

The illumination of the NCD indicator light in China VI vehicles means that the urea solution level is below 10%, and urea needs to be added as soon as possible. Below are the specific details about automotive urea: 1. Principle: The main harmful substances in exhaust are nitrogen oxides and particulates. Technical means can reduce particulate emissions inside the engine, leaving mainly nitrogen oxides in the exhaust. Urea is injected into the exhaust after-treatment device, where it decomposes into ammonia at high temperatures. Under the action of a catalyst, the ammonia reacts with nitrogen oxides to produce harmless nitrogen and water. This device is called the SCR after-treatment system. 2. Urea consumption: Vehicles have a dedicated urea tank, and urea is consumed as long as the vehicle is running, so it must be replenished promptly. Generally, about 4 liters of urea are consumed per 100 liters of diesel. The exact amount depends on factors such as engine displacement, model, manufacturer, etc. Different road conditions and loads can also affect urea consumption.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.