What are the speed limits for urban roads with and without center lines?

2 Answers
JaceLee
07/24/25 8:21pm
Urban roads with center lines have a speed limit of 40 kilometers per hour, while those without center lines have a speed limit of 30 kilometers per hour. Below are detailed introductions to the hazards of speeding: 1. Impact on vehicle operating conditions: Long-term speeding can easily worsen the vehicle's operating condition and increase the probability of failures in functions such as tires, braking systems, and steering systems. Without regular maintenance, it can easily lead to traffic accidents. 2. Increased risk of losing control and overturning during turns: Generally, speeding vehicles are in a state of changing lanes or overtaking. Each time a vehicle overtakes, it creates an intersection point with surrounding vehicles, increasing safety hazards. Additionally, there is a higher risk of losing control and overturning during turns.
Was this review help?
15
5
Share
Richardson
08/11/25 11:07am
I think the issue of speed limits on urban roads is quite worth discussing. Based on general driving experience, what we call 'wired roads' might refer to ordinary city streets, such as those in residential areas or downtown, where the speed limit is usually 50 to 60 kilometers per hour. 'Wireless roads' could refer to highways or urban expressways, where the speed limit is generally 100 to 120 kilometers per hour. These settings are for safety, aiming to reduce the number of accidents caused by low-speed collisions in the city, while balancing efficiency and risk on highways. When I drive, I always pay attention to these signs because speeding tickets are quite annoying and can also increase fuel consumption and accelerate vehicle wear. Overall, adhering to speed limits not only protects oneself but also reduces traffic congestion and headaches on the road. I recommend everyone develop the habit of checking signs, especially beginners who should be extra careful.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

What are the three-piece set for cars?

Car three-piece set includes 2 front seat cushions and 1 rear seat long cushion. Five-piece set, eight-piece set, nine-piece set: The five-piece set adds 2 front seat backrests to the three-piece set, the eight-piece set adds 3 rear seat backrests to the five-piece set, and the nine-piece set refers to 2 front seat cushions, 2 front headrests, 2 lumbar pillows, 1 rear long cushion and 2 backrests. Functions of three-piece set: The car three-piece set is an indispensable item for seat maintenance. Choosing car three-piece sets focuses on aesthetics and protection, which can prevent dirtying seats during driving, reduce wear and tear on car seats, thereby extending seat lifespan and ensuring more comfortable driving.
6
5
Share

Will points be deducted for paying traffic fines online?

Traffic violations paid online do not require point deductions. Fines only, no points deducted: If there are only fines without point deductions, the payment can be made directly online. Both fines and points deducted: For violations involving both fines and point deductions, the fine can be processed online, but the point deduction must be handled using one's own driver's license. Late payment will incur additional fees: Late payment for traffic violations will result in additional fees. If the violation was captured by an electronic eye, the payment can be made from a different location. The violation record will be unlocked and cleared 24 hours after the fine is paid.
7
3
Share

Is overtaking allowed on highways?

Overtaking is permitted on highways, but the following precautions should be observed: 1. Forced overtaking is prohibited: When the preceding vehicle fails to yield speed or lane due to certain reasons, forced overtaking is not allowed; when there is insufficient safe distance ahead of the preceding vehicle, squeezing in or forcing the overtaken vehicle to yield is prohibited. 2. Maintain a smooth overtaking path: Before overtaking, change to the left lane (or overtaking lane) in advance, and delay returning to the right lane after overtaking, keeping the driving trajectory basically parallel to the preceding vehicle. 3. Maintain distance: Always pay attention to keeping a safe distance from the overtaken vehicle before, during, and after overtaking.
6
4
Share

What is the RPM for shifting from first gear to second gear?

When shifting from 1st gear to 2nd gear, the engine RPM should be around 2000rpm. Here are some precautions to note when shifting gears in a car: Timing the gear shift correctly: For manual transmission vehicles, it's crucial to time the gear shift properly to avoid stalling or experiencing strong jerking movements. Depress the clutch fully when shifting: When shifting gears in a manual transmission car, the clutch pedal must be fully depressed to prevent damage to the transmission. Maintain steady RPM: If the engine RPM is too low during shifting, it may cause the engine to stall. If the RPM is too high, it will increase fuel consumption. During high-speed driving, it's best to maintain the engine RPM around 1600rpm.
12
2
Share

Which Type of Car Fire Extinguisher is Better?

According to national regulations, the minimum filling capacity for vehicle fire extinguishers is one kilogram. When purchasing a car fire extinguisher, it is advisable to choose one with a capacity of 1-3 kilograms. Additionally, since the storage conditions for fire extinguishers in vehicles are not ideal, it is best to opt for dry powder or water-based fire extinguishers. Below are the instructions for using a dry powder fire extinguisher: 1. Before use, thoroughly shake the extinguisher several times to loosen the dry powder inside the cylinder. 2. Remove the safety pin and hold the nozzle with your hand (for hose-less extinguishers, support the base of the bottle with your hand), then aim the nozzle at the base of the flame. 3. Press the handle firmly to release the dry powder from the nozzle.
13
5
Share

How to Identify Genuine Brembo GP4 Calipers?

Counterfeit Brembo brake calipers often have rough and easily peeling paint, with incorrect color tones. Authentic Brembo brake calipers typically come in four standard colors: red, black, silver, and yellow. Characteristics of Brembo: BREMBO braking systems are distinguished by their progressive braking response, unlike other brands that require extremely stiff suspensions. Even vehicles with slightly modified suspension kits won't experience excessive nose-diving during braking. Function of Calipers: Automotive calipers are clamping devices designed to decelerate, stop, or maintain the stopped state of moving wheels, generally used exclusively in disc brake systems. They are positioned on the protruding outer side of the brake pads, serving as components that enhance braking performance and are essential parts. Typically, automotive calipers come in three colors: red, yellow, and gray. However, yellow calipers are usually applied to ceramic brake systems.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.