What are the speed limits for the high and low lanes on a two-lane highway?

2 Answers
VanRemington
07/29/25 7:29pm
Two-lane highways have speed limits ranging from 100 to 120. Speed limits for two-lane highways: For a two-lane highway in the same direction, the rightmost lane is the emergency lane and cannot be used under normal circumstances. Therefore, driving is only permitted in the left and right travel lanes. According to China's Road Traffic Safety Law, the speed limit for the leftmost lane on a two-lane highway is 100-120. Speed limits for three-lane highways: For highways with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 kilometers per hour, the minimum speed for the middle lane is 90 kilometers per hour, and the deceleration lane speed should not exceed 50 kilometers per hour. If the speed limit indicated by road signs differs from the above lane speed regulations, drivers should follow the speed limit indicated by the road signs.
Was this review help?
7
2
Share
SanAlex
08/14/25 2:22pm
As someone who frequently drives on highways, I find the speed limit settings on two-lane highways quite interesting. The maximum speed is usually around 120 kilometers per hour, which is common on flat or straight sections; while there's no official minimum speed clearly defined, it's best not to go below 60 kilometers per hour during smooth traffic flow, as driving too slowly can easily cause congestion behind, especially during peak hours. I've also noticed that in mountainous areas or places with rain and fog, speed limit signs drop to 80 or even 60, so it's important to frequently check roadside signs and adjust flexibly. Personally, I prefer using cruise control between 100-110, which is safe and doesn't violate regulations. These rules vary by region—some places like the U.S. might use the mile system, where 75mph is the norm, but when driving, traffic flow and weather factors should be considered to avoid risks.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

Can You Still Drive with a Transmission Fault?

You can still drive with a transmission fault, but for safety reasons, it is recommended to repair or replace it as soon as possible. The main cause of transmission failure is a dirty valve body. A dirty valve body can degrade the quality and frictional properties of the transmission fluid, increasing friction and wear. Additionally, sludge can form inside the transmission, leading to blockages in the valve body and pipelines, which disrupts the proper regulation of oil pressure and results in transmission issues. The transmission is a mechanism used to alter the speed and torque from the engine, capable of fixing or changing the gear ratio between the output and input shafts. It consists of a gear transmission mechanism and a control mechanism, with some vehicles also featuring a power take-off mechanism.
14
2
Share

How to Determine if It's a New Car?

Methods to determine if it's a new car: 1. Check the production date: If it's quite old, the car might be a stock vehicle; 2. Inspect the engine compartment: Open the engine compartment and check the cleanliness level; 3. Examine the exhaust pipe: Insert a finger into the exhaust pipe to see if it's blackened, which indicates the car has been driven a certain mileage; 4. Check the tires: New tires usually have computer lines like paint, and there will be tire hairs on the side, which wear off after 50 to 100 kilometers. If the tire hairs are completely worn, the car's mileage is abnormal; 5. Listen to the engine sound to see if it's deep, if there are any abnormal noises, and if the vibration is significant.
13
5
Share

How to Remove the Car Air Conditioner Blower?

Car air conditioner blower removal method: 1. Unplug the blower power connector; 2. Remove the blower limit screws; 3. Hold the blower and rotate it to the left to remove it. Precautions for removal: 1. Turn off the vehicle power before disassembly; 2. Do not let foreign objects fall into the blower. The car air conditioner blower is mainly composed of a motor, air filter, blower body, air chamber, base (also serving as an oil tank), and oil drip nozzle. The blower operates by the eccentric rotation of the rotor inside the cylinder, changing the volume between the blades in the rotor slots to suck in, compress, and expel air. During operation, the pressure difference of the blower automatically delivers lubrication to the oil drip nozzle, which drips into the cylinder to reduce friction and noise, while preventing gas backflow in the cylinder.
16
1
Share

Does brakehold damage the car?

brakehold does not damage the car. brakehold refers to the ABH (Auto Brake Hold) automatic parking system. When the function is activated, the car can be stopped by pressing the brake pedal during brief temporary stops, and the braking force can be released by stepping on the accelerator pedal when moving forward is needed. The working principle of the automatic parking system is that the brake management system controls the four-wheel brakes through the extended function of the electronic parking brake (EPB). In other words, the automatic parking system is an extended function of the electronic parking brake (EPB), controlled by the ESP component.
18
3
Share

What type of engine oil is used for the Toyota Corolla?

Toyota Corolla uses engine oil with specifications of 0W20, 5W20, and 5W30. Among them, 0W20 and 5W20 oils have better fluidity and stronger lubrication capabilities, making them suitable for most environments. If the vehicle is older, 5W30 oil can also be used to ensure better engine performance. The Toyota Corolla is a compact car launched by FAW Toyota, with dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, and a wheelbase of 2700mm. It is equipped with a 1.2T turbocharged engine with a maximum power output of 85kW, paired with a CVT (simulated 10-speed) transmission.
17
0
Share

Can You Shift Gears Without Pressing the Clutch in a Manual Transmission?

You cannot shift gears without pressing the clutch in a manual transmission. You must first press the clutch before shifting. When shifting while driving, the clutch pedal should be pressed and released quickly, avoiding any semi-engagement, as this can accelerate clutch wear. Additionally, ensure proper coordination with the throttle during operation. To ensure smooth gear shifts and reduce wear on the transmission components and clutch, the "double-clutch shifting method" is recommended. Although this method is more complex, it is an effective way to save the vehicle and improve driving efficiency. A manual transmission is a gear-shifting mechanism that alters the engine's speed and torque delivered to the drive wheels, providing different levels of traction and speed for various driving conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also keeping the engine operating within a more favorable range.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.