What are the speed limits for lanes on highways?

2 Answers
LuciaDella
08/31/25 7:33am
When driving on a 3-lane highway in the same direction, the speed limit for the leftmost lane is 110-120 km/h, the middle lane is 90-110 km/h, and the rightmost lane is 60-90 km/h. On a 2-lane highway, the speed limit for the leftmost high-speed lane is 100-120 km/h, and the middle lane is 60-100 km/h. Article 78 of the "Regulations for the Implementation of the Road Traffic Safety Law" stipulates that highways shall indicate the driving speed of lanes, with the maximum speed not exceeding 120 km/h and the minimum speed not less than 60 km/h. On highways, the maximum speed for small passenger vehicles shall not exceed 120 km/h, other motor vehicles shall not exceed 100 km/h, and motorcycles shall not exceed 80 km/h. When the speed indicated by road speed limit signs is inconsistent with the above-mentioned lane speed regulations, the speed indicated by the road speed limit signs shall be followed. Precautions for driving on highways: Check the fuel level. Due to the long distances between gas stations on highways and the possibility of temporary fuel shortages, drivers should monitor their fuel levels and refuel in advance. Check the tire pressure. While driving, tires undergo compression and expansion, known as tire deformation. This phenomenon is more pronounced when tire pressure is low and speed is high, leading to abnormal internal heat, separation of rubber layers, or tire blowouts, which can cause accidents. Therefore, tire pressure should be slightly higher than usual before high-speed driving. Check the braking performance. The braking performance of a vehicle is crucial for driving safety. On highways, it is especially important to ensure effective braking. Before setting off, conduct a low-speed test to check braking performance. If any abnormalities are found, repairs must be made immediately to prevent serious accidents.
Was this review help?
9
4
Share
LeTalia
09/13/25 3:53am
I've been driving for nearly twenty years and have covered many stretches of highways. The speed limits are divided into three types: the leftmost lane is the overtaking lane, with a maximum speed of 120 km/h—use it to pass slower vehicles ahead. The middle lane is suitable for normal driving, with a speed limit of around 100 km/h, offering a stable and relaxed drive. The rightmost lane should not drop below 60 km/h unless in emergencies, but generally, it's best to maintain at least 80 km/h to avoid being tailgated by large trucks. During actual driving, I also remind everyone to watch the road signs, as speed limits may drop to 80 km/h in areas like tunnels or bridges, and reduce by another 20% in rainy conditions. On long-distance drives, maintain a safe distance of at least 100 meters to prevent accidents from sudden braking—this is a safety tip I’ve learned from experience. After overtaking, promptly return to the middle lane to avoid clogging the overtaking lane. Additionally, new road sections often have dense speed cameras, so keep an eye on your speedometer to avoid tickets, and carry a spare pair of sunglasses to prevent glare from affecting your speed judgment.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How to Adjust the Angle After Installing LED Car Bulbs?

led headlight adjustment steps are as follows: 1. Find a wall, ensure the ground is level, and park the car about 10 meters away from the wall. 2. Measure the height from the ground to the center of the headlight and the distance between the two headlights. 3. Place a horizontal masking tape on the wall 0.1 meters lower than the headlight height, ensuring the tape is centered directly in front of the car. 4. Turn on the headlights and adjust the vertical adjustment screw until the headlight beam is centered on the tape on the wall. 5. Continue adjusting the vertical adjustment screw until the headlight beam is straight forward. To ensure correct adjustment, measure the height of the beam on the wall and the height of the headlight, making sure both values are equal.
17
0
Share

Where is the engine number located on the JAC Refine S3?

The engine number of the JAC Refine S3 is located on the engine block. It usually consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle license shows the engine number, usually located on the second last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. Please note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is unique.
16
3
Share

Can I skip maintenance at the 4S store during the car's warranty period?

Vehicles generally come with a warranty period, during which major components such as the engine, transmission, and chassis suspension can be repaired or replaced free of charge at the manufacturer's authorized service stations (usually 4S stores) if they fail within a certain mileage or time frame. The warranty period is typically 3 years or 60,000 kilometers, 4 years or 100,000 kilometers, or even a lifetime warranty for some brands. When purchasing a car, 4S store staff often inform us that warranty services are only available if the vehicle is maintained at a 4S store during the warranty period. If maintenance is performed at an external auto repair shop, does it really mean automatic loss of warranty? In fact, the "Regulations on Motor Vehicle Maintenance" issued by the Ministry of Transport on January 1, 2016, clearly stipulates that manufacturers and 4S stores cannot refuse warranty services on the grounds that maintenance was not performed at an officially authorized shop. Except for the automobile manufacturer fulfilling the recall of defective automobile products and the "three guarantees" responsibility for automobile quality, no unit or individual may force or covertly force the designation of a maintenance operator. This regulation means that automobile manufacturers and dealers can no longer bind consumers to perform maintenance at 4S stores, and consumers can choose their own maintenance shops. The reason for the regulation is to break the monopoly of 4S stores in the auto repair and maintenance business and to address consumer concerns such as high maintenance costs at 4S stores, long driving distances, and excessive waiting times. However, in reality, when consumers claim for quality issues arising from maintenance not performed at a 4S store, disputes with 4S stores often occur. But not all 4S stores are so strict; many auto repair shops only require maintenance records to prove that the current vehicle failure was not caused by improper maintenance, allowing for a quality claim.
14
1
Share

How to solve the problem that the Mercedes lim is still on after being canceled?

The solution to the problem that the Mercedes lim is still on after being canceled is: 1. Press the one-touch start button of the Mercedes to start the vehicle; 2. Press the cncl button on the left keyboard area of the Mercedes multifunction steering wheel to turn it off. Taking the Mercedes GLC 2021 260L 4MATIC Dynamic model as an example, its length, width, and height are 4764mm, 1898mm, and 1642mm respectively, with a wheelbase of 2973mm. The vehicle is equipped with multi-link independent suspension both front and rear, and is powered by a 2.0t inline four-cylinder turbocharged engine with a maximum power of 145kw and a maximum torque of 320nm, matched with a 9-speed automatic manual transmission.
15
2
Share

Where is the Water Temperature Sensor Located on the Buick Excelle?

The location of the water temperature sensor on the Buick Excelle: It is situated at the engine's outlet pipe. The water temperature sensor is a device that provides the car with water temperature signals. Taking the Excelle 2020 15N Manual Elite as an example, the car has dimensions of 4468mm in length, 1765mm in width, and 1469mm in height, with a wheelbase of 2611mm. It is equipped with a 1.3L naturally aspirated engine, delivering a maximum power of 79kw and a maximum torque of 133nm. The front suspension type is MacPherson independent suspension, while the rear suspension type is a compound torsion beam non-independent suspension. The body structure is of a unibody type, with front-wheel drive as the driving method and electric power steering as the assistance type.
15
1
Share

What are the models of Michelin tires?

Here is a detailed introduction to the main Michelin tire models currently available in China: 1. Energy Series: Economical/durable/quiet and comfortable, suitable for small and medium-sized vehicles with 14-18 inch rims. The Energy series is Michelin's flagship economical and durable tire line. The XM1+ is positioned as economical and durable, while the XM2 focuses on durability and safety. Compared to the previous two, the MXV8 offers better comfort and quieter performance, making it more suitable for medium and large-sized vehicles. 2. Primacy Series: Quiet and comfortable/fuel-efficient/safe/handling-oriented, suitable for medium and large-sized vehicles with 15-19 inch rims. The Primacy series is Michelin's flagship quiet and comfortable tire line, mainly including Primacy LC, Primacy 3ST, and Primacy HP. The LC is positioned for quiet comfort and fuel efficiency, while the HP focuses on quiet comfort and strong handling performance. The latest Primacy 3ST emphasizes safety along with quiet comfort. 3. Pilot Series: High-performance/handling/safety, suitable for high-performance vehicles with 14-21 inch rims. The Pilot series represents Michelin's high-performance tires, mainly featuring five tread patterns: PP2, PS2, PS3, PSS, and CUP2. These four tires are positioned for high performance and handling, but they also have some drawbacks, such as excessive road noise, poor comfort, and wear indices around 300, indicating lower durability. 4. Latitude SUV Series: Latitude Tour HP, off-road/comfortable/wear-resistant, suitable for SUV models with 15-22 inch rims (excluding 21 inches). Michelin's SUV tires are mainly from the Latitude series, expanding Michelin's product coverage in the SUV tire market and providing more choices for luxury SUV owners.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.