What are the speed limit regulations for urban lanes?

3 Answers
DelPiper
07/25/25 8:30am
Motor vehicles driving on the road must not exceed the speed indicated by speed limit signs or markings; for urban roads with two or more motor vehicle lanes in the same direction and without speed limit signs or markings, the maximum speed is 70 km/h, while for closed motor vehicle-only roads and highways, the maximum speed is 80 km/h. Highway speed regulations: The speed of small passenger vehicles must not exceed 120 km/h, other motor vehicles must not exceed 100 km/h, motorcycles must not exceed 80 km/h, and must not be lower than 60 km/h. Traffic light speed regulations: There is no speed limit when approaching traffic lights or pedestrian crossings, but the speed must not exceed the road's speed limit; if the traffic lights are at road intersections or turns, the speed must not exceed 30 km/h. Generally, it should be between 30 to 60 km/h.
Was this review help?
8
3
Share
RosalieLee
08/11/25 1:51pm
I've been driving in the city for over ten years, and the speed limits are what people most often overlook. Generally, urban roads have a speed limit of 50 kilometers per hour, while main roads or avenues are limited to 60. For urban expressways like elevated roads, the limit is usually between 70 and 80. Special zones near schools have a 30 km/h limit, and the same applies around hospitals and kindergartens—these areas are clearly marked. During peak congestion, speeds naturally drop, but don’t think you can speed up just because no one seems to be watching—there are plenty of cameras. At night or in rainy or foggy conditions when visibility is poor, even though the speed limits remain the same, I recommend driving below the limit for safety. Safety comes first—speeding fines start at 200 yuan, and serious violations can lead to point deductions, which are even more troublesome. I’ve seen many people regret speeding after accidents, so always check your mirrors and maintain a steady speed to protect yourself and pedestrians. Remember to follow traffic signs, use navigation apps to remind you of the current speed limit, and develop good habits for peace of mind.
Was this review help?
11
5
Share
Expand All
Boromir
09/27/25 6:58am
After driving in the city for a long time, I find speed regulations quite important. Urban roads are usually limited to 50-60 km/h, while small streets and alleys have a 30-40 km/h limit, and elevated roads sometimes allow around 70 km/h. School zones require special attention, with a strict 30 km/h speed limit and numerous cameras. During rush hour, traffic jams naturally slow things down, but don’t take the chance to speed up—fines are unavoidable. Once, I was fined for exceeding the limit by just a few kilometers. Safety is the key concern; with so many people and vehicles in the city, higher speeds increase the risk of collisions. My advice is to control your speed, yield to pedestrians, and slow down especially at turns. In bad weather, reducing speed further is wise, even if the rules remain unchanged. Always watch for changing road signs, and new drivers should start practicing at 50 km/h. Driving this way keeps you calm and ensures a steadier daily life.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What is the method for replacing the key battery of a Mercedes-Benz C200L?

The method for replacing the key battery of a Mercedes-Benz C200L is: 1. Use the hidden mechanical key at the tail of the key to pry open the key cover; 2. Remove the old battery; 3. Replace it with a new battery. Taking the 2020 Mercedes-Benz C200L as an example, it belongs to the mid-size car category, with body dimensions of: length 4784mm, width 1810mm, height 1457mm, wheelbase 2920mm, and fuel tank capacity of 66L. The 2020 Mercedes-Benz C200L features a multi-link independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156PS, maximum power of 115kW, maximum torque of 250Nm, and is paired with a 9-speed automatic transmission.
5
5
Share

What does the triangle exclamation mark indicate when the car is in reverse gear?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation marks: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic transmission failure: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. It is necessary to replace the transmission oil promptly. Brake system failure: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire pressure abnormality: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting failure: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible, or perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
18
0
Share

Where is Haojue Wang Dawei from?

Haojue Wang Dawei is from Luoyang. Below is an introduction to motorcycle-related content: Working Principle: When the pedal is pressed, the mechanism pressurizes the spring, causing the outer edge of the spring to lift and the friction lining to separate from the friction plate. At this point, the friction plate and the flywheel can no longer engage, meaning that even if the engine continues to run, power will not be transmitted to the gearbox and wheels. This allows the driver to perform actions such as shifting gears or stopping the vehicle without causing the engine to stall. Power Transmission: When the crankshaft rotates at low speeds, the two friction linings do not contact the outer casing, preventing power transmission. At higher crankshaft speeds, centrifugal force causes the friction linings to move outward and engage with the outer casing, enabling power to be transmitted.
16
1
Share

What are the reasons for the loud engine noise in the Boyue?

The reasons for the loud engine noise in the Boyue are: 1. Aging engine mounts; 2. Aging engine mounts; 3. Severe carbon buildup in the engine; 4. Faulty engine cylinders; 5. Poor lubrication; 6. Excessive wear of pistons and cylinder walls; 7. Engine overheating, cooling system failure; 8. Blocked exhaust system, vacuum tube leakage or breakage; 9. Loose belts. Taking the 2020 Boyue as an example, it belongs to the compact SUV category, with body dimensions of: length 4544mm, width 1831mm, height 1713mm, wheelbase of 2670mm, fuel tank capacity of 58 liters, and curb weight of 1610kg.
6
0
Share

What is the reason for successfully reversing into the parking space in one go?

During the initial process of fully turning the steering wheel, it is necessary to observe the distance relationship between the car body and the corner of the parking space in the rearview mirror. When this distance is about 30 centimeters (mirror system distance of two fingers' width), and the angle between the car body and the parking line is approximately 45 degrees, it is the best condition for successfully reversing in one go. Reversing distance: If this distance is too narrow or too wide, it needs to be adjusted to achieve the ideal distance for one-go reversing. If the distance is too narrow, it indicates that the steering was turned too early, slightly less than 30 centimeters. In this case, you can first turn the steering wheel back two turns. However, if you are about to hit the corner of the parking space, you must immediately steer to the right to avoid it, and only after creating enough distance can you turn the steering wheel back. Timing for steering adjustment: If the distance is too wide, it means the steering was turned too late. When reversing into the parking space, you need to delay the timing of steering adjustment, allowing the car body to enter the parking space at an angle. Once a sufficiently large distance is created, you can steer to the right to adjust and straighten the car body.
8
2
Share

Where is the VIN location on a smart car?

The VIN (Vehicle Identification Number) of a smart car is located at the junction angle between the heat insulation pad and the cover plate in the rear trunk. You need to lift the rear trunk heat insulation pad to see it. Taking the 2019 smart fortwo as an example, it belongs to the microcar category with the following dimensions: length 2695mm, width 1663mm, height 1555mm, wheelbase 1873mm, fuel tank capacity 33 liters, and curb weight 956kg. The 2019 smart fortwo features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 0.9L turbocharged engine delivering maximum power of 90PS (66kW) and maximum torque of 135Nm, paired with a 6-speed dual-clutch transmission.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.