What are the specifications for the 16-inch wheels of the Volkswagen Touran?

1 Answers
KeeganLynn
07/30/25 8:25am
The specifications for the 16-inch wheels of the Volkswagen Touran are: bolt pattern 5X112, ET46, center bore 57.1mm, and size 16X6.5J. Car wheel maintenance methods: Cleaning: The wheel hub is the central part of the wheel where the axle is installed, commonly referred to as the "rim" or "steel rim." The surface of the wheel hub is particularly prone to accumulating soil particles or dirt. When these are noticed on the wheel hub, they must be cleaned promptly to prevent corrosion of the alloy. Waxing: It is recommended to apply a coat of wax to the wheel hub every two months. Use an acid-resistant cleaner to thoroughly clean both the inside and outside of the wheel hub. The ingredients in the cleaner can effectively remove dirt and reduce damage to the alloy.
Was this review help?
15
4
Share
More Forum Discussions

What is the refrigerant charging capacity for the Audi Q7?

When adding refrigerant, a pressure gauge is first used for testing, and it should be charged up to 2.5 pressure. Below are the methods for adding refrigerant to a car: 1. High-pressure side charging: This involves adding refrigerant from the bypass port (multi-purpose channel) of the compressor discharge valve (high-pressure valve), known as high-pressure side charging, where liquid refrigerant is added. This method is characterized by safety and speed, suitable for the first charging of the refrigeration system, i.e., after leak detection and vacuuming. However, it must be noted that the compressor should not be turned on during charging (with the engine off), and the refrigerant canister must be inverted. 2. Low-pressure side charging: This involves adding refrigerant from the bypass port (multi-purpose channel) of the compressor suction valve (low-pressure valve), known as low-pressure side charging, where gaseous refrigerant is added. This method is characterized by slower charging speed and can be used for supplementing refrigerant in the system.
16
5
Share

What is the optimal age and mileage for a used car?

The optimal age for a used car is within 5 years, and the mileage should be under 50,000 kilometers. Below are some related introductions about used cars: 1. Optimal age and mileage: The optimal age is within 5 years, as environmental regulations are being upgraded rapidly, and annual inspection standards are becoming stricter. If the new car's market value is below 200,000, then the mileage should ideally be under 50,000 kilometers; if the new car's market value is between 200,000 and 700,000, then a mileage under 100,000 kilometers is still acceptable in terms of performance. 2. Considerations when purchasing: Check the brand and model—here, the model refers to the vehicle's specific type. Some brands are easier to maintain, with more available and cheaper spare parts, making such used cars more convenient for future use. Also, consider the price drop of the new car. If the new car's price is relatively stable and the price drops slowly, the used car's resale value will be higher.
18
4
Share

What are the gear positions of Audi?

Audi gear positions include P, N, D, R, and S. The following is a related introduction to Audi gear positions: 1. P position: It is the parking and starting position. When this gear is engaged, the parking lock mechanism locks the transmission output shaft. 2. R position: It is the reverse gear. When this gear is engaged, the hydraulic system reverse gear oil circuit is connected, causing the drive wheels to reverse for reverse driving. When the vehicle is not completely stopped, do not forcibly shift to the "R" position, as this may damage the transmission. 3. N position: It is the neutral gear. When the neutral gear is engaged, the planetary gear system idles and cannot output power. 4. D position: It is the drive gear, also known as the forward gear. When the gearshift lever is in this position, the hydraulic system control device automatically connects the corresponding forward gear based on the throttle signal and vehicle speed signal. It can automatically shift up or down with changes in driving speed, achieving automatic transmission function. 5. S position: It is the sport mode. When the gearshift lever is in this position, the transmission control module receives the driver's command, and the vehicle enters sport mode.
2
4
Share

Has Weichai Enranger Already Ceased Production?

Weichai Enranger has already ceased production. Below are specific details about Weichai Enranger: 1. Brand Introduction: The "Enranger" brand is the first brand established by Weichai in the light vehicle business sector. From then on, all products in Weichai's light vehicle sector will belong to the "Enranger" brand, which also marks the official start of Weichai Automobile's exploration and innovation in the light vehicle market. 2. Company Introduction: Weichai Power took control of Jiachuan Company in 2009 and acquired the remaining equity of Jiachuan Company in March 2012, making Jiachuan Company a wholly-owned subsidiary of Weichai Power. Weichai Automobile is located in Chongqing, one of China's automotive manufacturing centers and the economic hub of the western region, with its production base situated in Shuangfu New District, Jiangjin District, Chongqing.
12
3
Share

Why does the car automatically shut off when stopping?

The following are the reasons why a car automatically shuts off when stopping: 1. Misoperation: Especially for beginners, such as shifting to the wrong gear, braking too hard, improper clutch-throttle coordination, or accidentally turning off the car with the key. Simply restart the engine. 2. Dirty throttle/idle speed control valve: This mostly occurs at idle speed, often accompanied by engine shaking. Lightly press the accelerator when restarting to provide fuel for ignition. It is recommended to clean the throttle promptly. 3. Fuel system failure: Causes include poor fuel quality, running out of fuel, fuel pump burnout, clogged fuel lines, faulty fuel pump fuse, or defective fuel pressure sensor. Inspect related components. 4. Ignition system failure: Includes spark plug issues, faulty ignition coil/module, or aging cylinder wires. Check related components. 5. Throttle or idle speed control valve failure: These are critical components of the engine intake system and relatively precise parts. Many cases of engine stalling or failure to start are due to damaged throttle assemblies or idle speed control valves.
14
0
Share

Where is the outdoor sensor located on the BMW 525?

The outdoor sensor on the BMW 525 is located above the brake disc ventilation duct. The BMW 525 belongs to the BMW 5 Series. Below is a detailed introduction about the BMW 5 Series: 1. Overview: The domestic 5 Series is a high-end sedan. The current generation of the 5 Series was introduced in 2004. The BMW 5 Series is one of the most outstanding series in automotive history, with its peak era beginning with the third-generation E34 (1988-1996). The current 5 Series is the third-generation product of the E34. 2. Other details: The top speed is 250 km/h. The seat material is genuine leather. The acceleration time is 8.6 seconds (0-100 km/h). The drivetrain is front-engine, rear-wheel drive. The body weight is 1740 kg. The number of valves is 24. The standard transmission is an 8-speed automatic with manual shifting. The maximum power is 190 KW/rpm. The maximum torque is 400 Nm/rpm.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.