What are the specific techniques for the S-curve test in Subject 2?

1 Answers
CarterLee
07/29/25 11:56pm
Subject 2 S-curve test specific techniques are as follows: 1. Drive the vehicle towards the curve driving test area, and the in-car voice prompt will start. At this time, drive the vehicle to the entrance of the curve, adjust the vehicle to the center of the road, and try to keep the outer front wheel of the vehicle close to the right edge of the curve. 2. After the vehicle enters the curve area, when the left front corner touches the right line, turn the steering wheel left by one full turn plus 45 degrees, keeping the left front corner at a certain angle to the right line of the first S-curve. This will prevent the vehicle from crossing or going out of the line. 3. Slowly complete the right line of the first curve without moving the steering wheel. When the left front corner touches the left line of the second curve, straighten the steering wheel by one full turn plus 45 degrees, and let the vehicle move slowly for a while. 4. When the right front corner touches the left line of the second curve, turn the steering wheel right by one full turn plus 45 degrees, keeping the right front corner at a certain angle to the left line of the second curve. This will prevent the vehicle from crossing or going out of the line.
Was this review help?
10
5
Share
More Forum Discussions

What are the reasons for insufficient engine oil?

The reasons for insufficient engine oil are: 1. Oil leakage; 2. Excessive oil consumption; 3. Oil pump failure. The functions of engine oil are: 1. Alleviate friction and high temperature; 2. Reduce gas leakage and prevent external pollutants; 3. Prevent contact between water, air, acidic harmful gases, and parts; 4. Buffer the pressure rise in the engine cylinder port; 5. Flush away dirt generated on the working surfaces of parts. The characteristics indicating that engine oil needs to be replaced are: 1. Check the oil viscosity—if there is no viscosity, the oil needs to be replaced; 2. The oil color turns black; 3. Excessive black particles, metal shavings, or carbon deposits in the oil; 4. The oil smells unusual.
18
0
Share

How to Turn on the High Beam in a Citroën?

To turn on the high beam in a Citroën, press the headlight switch button on the right side of the multifunction steering wheel. Taking the 2018 Citroën DS5 as an example, it is a mid-size car with body dimensions of 4530mm in length, 1871mm in width, and 1520mm in height, a wheelbase of 2727mm, a fuel tank capacity of 60 liters, and a curb weight of 1600kg. The 2018 Citroën DS5 features a MacPherson strut front suspension and a trailing arm torsion beam rear suspension. It is equipped with a 1.6T turbocharged engine, delivering a maximum horsepower of 167PS, a maximum power of 123kW, and a maximum torque of 240Nm, paired with an 8-speed automatic transmission.
12
4
Share

What is the cleaning method for car air conditioning?

The cleaning method for car air conditioning is: 1. Use a blower to clean the air filter from the inside out; 2. Shake the air conditioning cleaner well and spray it directly at the position of the air filter; 3. Remove the air conditioning for cleaning. The benefits of cleaning car air conditioning include: 1. Enhanced cooling; 2. Purified indoor air; 3. Extended air conditioning lifespan; 4. Reduced air conditioning malfunctions. The usage and maintenance methods for car air conditioning are: 1. Do not set the temperature too low; 2. Control the direction of the air outlet; 3. Avoid prolonged use; 4. Appropriately turn on high airflow; 5. Turn off the air conditioning when driving at low speeds. The components of car air conditioning are: compressor, condenser, evaporator, liquid storage dryer, and expansion valve.
6
4
Share

How to Clear the Maintenance Reminder on a Lexus UX?

To clear the maintenance reminder on a Lexus UX, follow these steps: 1. Turn off the ignition switch; 2. Press and hold the trip meter reset button, then turn on the ignition switch. The mileage display will begin counting down. Release the button when the display shows zero. Taking the 2020 Lexus UX as an example, its body dimensions are: length 4495mm, width 1840mm, height 1540mm, with a wheelbase of 2640mm. The 2020 Lexus UX features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 173ps, a maximum torque of 207Nm, and a maximum power output of 127kW.
16
2
Share

What is the method for defogging the front windshield of a car?

The method for defogging the front windshield of a car is: 1. Start the car; 2. Press the defogging button below the center console. The functions of car windows are: 1. Shelter from wind and rain, reduce noise; 2. Reduce wind resistance and guide airflow; 3. Protect the personal safety of passengers. The maintenance methods for car windows are: 1. Use glass water according to the season; 2. Apply car window heat insulation film. The cleaning methods for car windows are: 1. Pour water from the top of the vehicle and wipe off the dirty water with a sponge; 2. Evenly spray glass cleaner solution onto the glass using a high-pressure spray bottle; 3. Carefully dry the moisture with a soft cloth.
12
4
Share

How to Turn on the Air Conditioning in the Mingtu?

The method to turn on the air conditioning in the Mingtu is: locate and press the AC button near the center console. Taking the 2021 Mingtu as an example, it is a mid-size car with body dimensions of 4780mm in length, 1815mm in width, and 1460mm in height, a wheelbase of 2770mm, a minimum ground clearance of 116mm, and a curb weight of 1357kg. The 2021 Mingtu features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 170PS, a maximum torque of 253Nm, and a maximum power of 125kW, paired with a 7-speed dual-clutch transmission.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.