···
Log in / Register

What are the specific operations for overtaking in Subject 3?

1 Answers
LincolnLee
09/01/25 2:50am
The basic operation steps for overtaking in Subject 3 are: 1. Turn on the left turn signal and check the left rearview mirror. 2. Enter the overtaking lane (if the speed is insufficient, shift gears to accelerate). 3. Turn on the right turn signal and check the right rearview mirror. 4. Check the right rearview mirror. 5. Enter the fast lane. Extended content: 1. The road driving skill test generally includes: preparation for getting on the car, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, parking on the side, passing through intersections straight, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, turning around, and driving at night. 2. The safety and civilized driving knowledge test generally includes: safety and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge.
Was this review help?
14
5
Share
More Forum Discussions

Is a Broken Clutch Spring a Serious Issue?

A broken clutch spring has significant impacts. Here are the relevant details: 1. Possible symptoms: Clutch shuddering. When starting the vehicle, even with careful gradual acceleration and slow release of the clutch pedal, the vehicle fails to start smoothly and exhibits jerking movements. This occurs because the clutch engagement is shaky and unstable, leading to unsteady vehicle starts. 2. Causes: (1) Improper adjustment or deformation of the release levers, resulting in uneven contact between the three release levers and the release bearing. (2) The damping springs on the clutch driven plate are too weak or broken, failing to provide adequate vibration damping. (3) Wear or lack of lubrication in the release bearing housing, causing restricted movement.
4
2
Share

What Causes the Acceleration Noise and Slow Speed in the 8th Generation Accord?

The reasons for acceleration noise and slow speed in the 8th Generation Accord are as follows: 1. Clutch Slippage: The main cause of clutch slippage is insufficient friction on the clutch friction plate; shifting gears too early or disengaging gears improperly; prolonged driving with the clutch partially engaged or coasting with the clutch pedal depressed; shifting or disengaging gears improperly, and applying sudden throttle when the gear is not fully engaged or disengaged, leading to abnormal wear of the clutch plate. 2. Engine Intake System: Besides fuel, the engine also requires air. If components like the air filter or throttle body are clogged or malfunctioning, causing insufficient air intake, it can result in weak acceleration, slow speed, and a jerky feeling.
16
3
Share

What Causes the Low-Speed Abnormal Noise in the Envision?

The causes of low-speed abnormal noise in the Envision are as follows: 1. Body noise: This issue is usually due to insufficient body rigidity, causing deformation during driving, resulting in friction or vibration between the doors and the frame, or friction between steel plates due to welding failures in certain areas. 2. Engine compartment noise: There are various possibilities for noise here. A high-pitched belt squeal is typically caused by belt slippage. 3. Transmission noise: If there is abnormal noise from the transmission while driving, which disappears when the clutch is pressed, it indicates a transmission issue, possibly due to worn transmission bearings or gears.
17
1
Share

Why does the Audi body resonate at 120 km/h on the highway?

This situation is generally caused by unbalanced tires. It is recommended to go to a tire shop to perform dynamic balancing on the tires. Introduction to tires: Tires are circular elastic rubber products mounted on various vehicles or machinery for rolling contact with the ground. They are usually installed on metal rims to support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance. Required tire performance: Tires are often used under complex and demanding conditions. During driving, they endure various deformations, loads, forces, and high/low-temperature effects. Therefore, they must have high load-bearing capacity, traction performance, and shock absorption. Additionally, they must exhibit high wear resistance, flex resistance, as well as low rolling resistance and heat generation.
5
2
Share

Which button is for the automatic parking in the Audi Q3?

The button for the automatic parking in the Audi Q3 is located on the central armrest operation panel. Below is an introduction to the automatic parking function: 1. Definition: Automatic parking refers to the car automatically parking itself without manual control. Car manufacturers developed vehicles capable of automatic parking in response to consumer demand. This feature assists drivers in parking automatically. 2. Working principle: When the automatic parking function is activated and the car passes an empty parking space at a speed of about 5 km/h, the empty space is detected and identified by ultrasonic sensors and displayed on the information display panel.
8
0
Share

What are the reasons why the Toyota Levin cannot start?

Toyota Levin may fail to start due to the following reasons: 1. Battery depletion: The starter begins to turn but lacks sufficient speed or power, eventually making only a clicking sound without turning. Low temperatures in winter or forgetting to turn off certain electrical devices can prevent the vehicle from starting, especially during prolonged short-distance, low-speed usage in winter, which can cause the battery voltage to drop below the rated value, making starting and normal operation impossible. 2. Fuel flow obstruction: Do not wait until the fuel is almost empty to refuel. No oil pressure in the engine fuel supply line. This situation often occurs on extremely cold mornings, caused by long-term dirt accumulation in the fuel lines. When temperatures are extremely low, water mixed with debris can block the fuel lines, resulting in a failure to start. 3. Poor ignition system performance: On particularly cold days, due to low intake air temperature, fuel atomization in the cylinder is poor. If combined with insufficient ignition energy, this can lead to cylinder flooding, where excessive fuel accumulates in the cylinder, exceeding the ignition limit concentration and preventing the engine from starting.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.