What are the specific dimensions of the Honda CR-V?

1 Answers
VonJaxson
07/29/25 9:06am
The length, width, and height of the Honda CR-V are 4621mm/1855mm/1679mm, which are official data. The length of the Honda CR-V refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Honda CR-V has a maximum power of 142kW and a maximum torque of 234Nm. This engine reaches its maximum power at 5600 rpm and its maximum torque between 2000 and 5000 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 6-speed manual transmission. The state has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
Was this review help?
3
2
Share
More Forum Discussions

What to Do If a Car Hasn't Been Driven for Several Months?

If a car hasn't been driven for several months, you need to disconnect the power supply in advance and remove the negative terminal. Park it in a garage if available; if not, find a safe, dry, and shaded location to park and cover it with a car cover. Clear all items from the car, especially avoiding leaving snacks inside. Ensure the tires maintain sufficient pressure, meaning they should be fully inflated. When you need to drive the car again, follow these steps: 1. Check if the tires are deformed: If the car remains stationary for a long time, the entire weight of the car is supported by the four tire contact points with the ground, which may cause pressure on these areas. If any abnormalities are found, replace the tires promptly. 2. Check the tire pressure: Normally, tire pressure may decrease slightly, so it's necessary to inflate them appropriately. If the pressure is already at the standard level, no action is needed. 3. Warm up the car sufficiently: Due to prolonged parking, the engine oil will settle at the bottom of the oil pan, leaving various car components without lubrication. To allow the oil enough time to lubricate all engine parts and reduce wear, the warm-up time should be slightly longer than usual. Additionally, avoid aggressive driving immediately after starting the car, as some components only receive lubrication once the car is in motion. After completing the stationary warm-up, drive slowly until the engine coolant temperature reaches normal levels before driving as usual.
2
5
Share

What to Do If Vehicle Inspection Expires?

The solution for an expired vehicle inspection is to promptly complete the procedures for a supplementary inspection. The time regulations for annual inspections are as follows: 1. For passenger transport vehicles within 5 years, inspect once per year; for those over 5 years, inspect once every 6 months. 2. For cargo vehicles and large or medium-sized non-passenger transport vehicles within 10 years, inspect once per year; for those over 10 years, inspect once every 6 months. 3. For non-passenger transport vehicles within 6 years, two inspections can be exempted; for those over 6 years, inspect once per year; for those over 15 years, inspect once every 6 months. The items for annual inspection include: 1. Check whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and effective; whether the paint is uniform and aesthetically pleasing; whether the main assemblies have been replaced; and whether they match the initial inspection records. 2. Test whether the vehicle's braking performance, lights, exhaust, and other safety features comply with relevant regulations. 3. Check whether the vehicle has been modified, remodeled, or altered; whether the driving license, license plate, and all vehicle registration records match the actual condition of the vehicle. 4. Inspect whether the license plate, driving license, and enlarged license plate characters printed on the vehicle are damaged, altered, or unclear, and whether they need replacement.
2
4
Share

How often should a car from 2014 undergo annual inspection?

Vehicles aged between 6 to 15 years should undergo an annual inspection at the vehicle management office and its subordinate inspection units. Below is extended information about annual inspections: 1. Motor vehicles should undergo safety technical inspections according to the following schedule from the date of registration: (1) Passenger vehicles for commercial use must be inspected once a year within the first 5 years; after 5 years, every 6 months; (2) Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first 10 years; after 10 years, every 6 months; (3) Small and micro non-commercial passenger vehicles must be inspected once every 2 years within the first 6 years; after 6 years, once a year; after 15 years, every 6 months; (4) Motorcycles must be inspected once every 2 years within the first 4 years; after 4 years, once a year; (5) Tractors and other motor vehicles must be inspected once a year. 2. Regulation: Starting from September 2014, non-commercial private small passenger vehicles with 6 seats or fewer (excluding minivans) are exempt from on-site inspections for the first 6 years. This means that when applying for an annual inspection, a test report is no longer required. As long as all violations and accidents are resolved, owners can directly apply for the compliance mark from the traffic police team or vehicle management office every 2 years with the compulsory traffic insurance and vehicle and vessel tax documents.
3
4
Share

What is the purpose of the Audi A4L all-weather lights?

It is to increase the visibility range of the front of the car. Some Audi models have eliminated the front fog lights and replaced them with all-weather headlights. Similarly, the switch for the all-weather headlights has taken the place of the original fog light switch, marked with the symbol of a low beam plus a rain sign. Obviously, this feature is used in conditions of poor visibility such as rainy or foggy weather. When activated, the headlight angle is adjusted slightly lower, and small lights at the inner corners will illuminate, primarily to widen the lateral field of vision. Overall, this is all aimed at increasing the visibility range of the front of the car. All-weather headlights: All-weather headlights, also known as automatic sensor-activated headlights, are equipped with a light-sensitive control system for the front headlights. The central intelligent control box determines changes in light brightness via a light sensor, thereby controlling the automatic activation or deactivation of the headlights. The automatic headlights only function when the light control is set to automatic mode. Addition of a light-sensitive resistor: Many car lights are equipped with a light-sensitive resistor, which is a resistor capable of sensing ambient light. When the external light is dim, the resistor automatically connects the circuit, turning on the lights. Conversely, when the external light is bright, the resistor automatically disconnects the circuit, turning off the lights.
5
3
Share

What Was the World's First Hybrid Car?

The world's first hybrid car was born in 1896, and this car was named the Armstrong Phaeton. Here is a related introduction about hybrid vehicles: 1. Definition: A hybrid vehicle (Hybrid-Vehicle) refers to a vehicle whose propulsion system consists of two or more individual propulsion systems that can operate simultaneously. The driving power of the vehicle is provided by one or more of these systems, depending on the actual driving conditions. 2. Classification: According to the connection method of the hybrid power drive, hybrid vehicles are generally divided into three categories: Series Hybrid Electric Vehicle (SHEV), Parallel Hybrid Electric Vehicle (PHEV), and Power-Split Hybrid Electric Vehicle (PSHEV).
16
3
Share

Can changing the color of the front grille pass the annual inspection?

Changing the color of the front grille before registering a new vehicle does not affect the annual inspection. However, if the front grille is replaced after the new vehicle is registered, it is necessary to go to the vehicle management office for re-registration and update the driving license. Otherwise, it will affect the annual inspection. The following are the conditions under which changes will not be registered: 1. Condition one: Changing the brand, model, or engine type of the vehicle, except for engines that are optionally installed with the permission of the national motor vehicle product authority. 2. Condition two: Changing the registered appearance and technical data of the vehicle, unless otherwise specified by laws, regulations, or national mandatory standards.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.