···
Log in / Register

What are the solutions when the BYD S6 key cannot be detected?

4 Answers
DelHarley
09/06/25 3:04am

The solutions when the BYD S6 key cannot be detected are: 1. Replace the battery; 2. Check if there is an issue with the anti-theft control unit system; 3. There may be magnetic interference around, move the vehicle to another location and try again. Taking the 2014 BYD S6 as an example, its body dimensions are: length 4810mm, width 1855mm, height 1725mm, wheelbase 2720mm, and fuel tank capacity 72L. The 2014 BYD S6 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 154PS, maximum power of 113kW, maximum torque of 240Nm, paired with a 6-speed manual transmission.

Was this review help?
12
4
Share
BrodyFitz
09/18/25 3:06am

My BYD S6 also encountered the key detection issue before. It might be due to a dead battery in the key fob—try replacing it with a new CR2032 battery. If that doesn't work, check if there's any signal interference from mobile phones or WiFi devices nearby. Sometimes moving away from such electronic devices can solve the problem. I experienced this in a parking lot once and resolved it by changing my position. If it still doesn't function, test with the spare key. If the spare works, it means the original key is faulty. If all these methods fail, the vehicle's receiver might be malfunctioning, and you'll need to visit a 4S dealership for professional tool recalibration or inspection. This issue can delay your trip and pose safety risks, so early resolution is recommended for peace of mind.

Was this review help?
20
1
Share
Expand All
LaMaddox
11/01/25 3:33am

The solution for BYD S6 key detection failure is quite simple: First, check the remote control battery, usually the CR2032 model, and try replacing it with a new one. Then, ensure the key is near the vehicle and operate it closer to the door. If that doesn't work, eliminate signal interference sources, such as avoiding wireless devices or strong magnetic fields in parking lots. Next, try restarting the vehicle by disconnecting the power: After closing all doors, disconnect the negative terminal of the battery for a few minutes and then reconnect it to see if detection is restored. If the key still can't be detected after these steps, it might be due to internal circuit issues in the key or a system bug in the vehicle, requiring a BYD specialized repair shop to read the fault codes with a diagnostic tool and reprogram the key. In daily use, avoid placing the key in the same pocket as your phone to prevent interference.

Was this review help?
17
5
Share
Expand All
DelMarley
12/15/25 3:43am

Don't panic if your BYD S6 key isn't detected - replacing the battery solves most issues. Try the spare key too; if that fails, it's likely a vehicle system problem. Operate closer to the car to ensure you're within range. Still stuck? Reset the car system: turn off the engine, disconnect the battery for 3-5 minutes, then reconnect. Interference matters - keep keys away from phones or metal objects. Quick fixes are best; if unresolved, get the receiver module checked for safe driving.

Was this review help?
13
3
Share
Expand All
More Forum Discussions

How to Replace the Air Filter in a BMW 5 Series?

Method for replacing the air filter in a BMW 5 Series: 1. Open the engine hood and locate the air filter housing. 2. Unclip the two fasteners securing the housing cover to lift the entire air filter housing cover. 3. Lift the air filter housing cover and remove the old air filter. 4. Install the new air filter, replace the housing cover, and secure the fasteners. Taking the BMW 5 Series 2021 525Li Luxury Package as an example, here are its specifications: 1. Body dimensions: length, width, and height are 5106mm, 1868mm, and 1500mm respectively, with a wheelbase of 3105mm. 2. Powertrain: equipped with a 2.0T turbocharged engine, delivering a maximum power of 135kw, paired with an 8-speed automatic transmission.
8
0
Share

Where is the engine number located on the Buick Excelle?

The engine number of the Buick Excelle is located in the engine compartment, specifically in the area below the engine pulley, which makes it relatively easy to find. Generally, the position of the engine number varies depending on the car model and brand. Below is some relevant information about engine numbers: 1. The engine number is the unique identifier of the engine, much like a person's ID card, with each engine having a distinct number. Typically, the engine number consists of several parts, including the product code, number of cylinders, manufacturing information, and structural features. 2. The engine number is usually located below the spark plugs, though some models may have it engraved on a nameplate in the engine compartment. For the exact location, you can consult the staff at a 4S store or refer to the car's factory manual.
8
3
Share

How to Reset the Golf Tire Pressure Monitoring?

The tire pressure monitoring alarm in the Golf can be reset using the tire pressure reset button. Below is a detailed introduction on how to reset the Golf tire pressure monitoring: 1. The tire pressure reset button is located around the gear shift lever. Press and hold it for 3-5 seconds to turn off the tire pressure warning light: The tire pressure monitoring indicator light is a warning method for the owner based on tire pressure and other issues. When encountering uneven road surfaces during driving, the tires bear different forces, causing changes in tire pressure, which will trigger the indicator light. 2. After replacing tires or inflating them, reset the tire pressure promptly: Regular maintenance of the car tires is essential to ensure the car's normal operation. After replacing tires or inflating them, the tire pressure monitoring system may alarm due to changes in tire pressure, so it is necessary to reset the tire pressure promptly to avoid triggering the tire pressure monitoring warning light.
2
0
Share

What is the relationship between Kaiyi and Chery?

Kaiyi belongs to Chery Holding Group. Kaiyi is an independent brand, and this brand has many SUV models. The SUVs under Kaiyi include the X3, X5, Xuanjie, X7, V3, etc. Taking the Xuanjie as an example, it is a compact SUV with a length, width, and height of 4400mm, 1831mm, and 1653mm respectively, and a wheelbase of 2632mm. The Xuanjie is equipped with a 1.5-liter naturally aspirated engine across the entire lineup. This engine has a maximum power of 85kW and a maximum torque of 143Nm. It features DVVT technology and multi-point electronic fuel injection technology, and uses an aluminum alloy cylinder head and cast iron cylinder block. It is paired with either a 5-speed manual transmission or a CVT transmission.
3
5
Share

What type of engine oil is suitable for Nissan Teana?

Nissan Teana can use fully synthetic engine oils with specifications of 0W-30, 5W-30SN, and 0W-40SN. More details about the engine oil for Teana are as follows: 1. Nissan Teana can choose engine oil according to the user manual: Nissan Teana uses fully synthetic engine oil with 0W-30 specification. According to the user manual, semi-synthetic engine oil (minimum requirement) can be used, but it is best to choose fully synthetic engine oil. 2. The fully synthetic engine oil with 5W-30SN specification is the best choice for Nissan Teana: The 0W-40SN specification engine oil can also be used. Fully synthetic engine oils from Mobil, Shell, or Castrol with 0W-40SN specification are all suitable for Teana. At the same time, any engine oil that meets the SAE certification level can be used.
7
3
Share

What is the relationship between McLaren and Mercedes-Benz?

Mercedes-Benz owns shares in McLaren, making it one of the shareholders of McLaren, which defines the relationship between the two companies. Both Mercedes-Benz and McLaren are automobile manufacturers, with McLaren specializing in the production of supercars. Some of the supercars under its brand include the 540C, 570, 600T, 720S, and McLaren GT. Taking the 720S as an example, it is an extremely high-performance supercar. This car is equipped with a 4.0-liter twin-turbocharged V8 engine, which delivers 720 horsepower and a maximum torque of 770 Nm. The engine can output its maximum power at 7,500 rpm and reach its peak torque between 5,500 and 6,500 rpm.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.