What are the solutions when a Jinbei vehicle fails to start but has power?

What is the bulb model for the Buick Envision headlights?

The bulb models for the Envision headlights are H7 for both the low beam and high beam. The headlights include LED lights for both low and high beams, as well as turn signals and width indicators. The headlight switch is located on the lighting control assembly to the left of the steering wheel. Additional information: 1. Design Philosophy: The Chinese name for the Buick ENVISION is 'Angkewei' (Envision). As a new-generation strategic model of General Motors, the Buick Envision's exterior design inherits the essence of the ENVISION Vision concept car. 2. Powertrain: The 2020 Buick Envision offers two engine options: a 2.0T SIDI direct-injection turbocharged engine paired with a 9-speed HYDRA-MATIC intelligent transmission, and a 1.5T SIDI direct-injection turbocharged engine paired with a 7-speed DCG PLUS intelligent dual-clutch transmission. The former delivers a maximum power of 191 kW at 5500 rpm, a peak torque of 400 N·m between 3000-4000 rpm, accelerates from 0-100 km/h in 8.2 seconds, and has a combined fuel consumption of 8.8 liters per 100 km. The latter provides a maximum power of 124 kW at 5600 rpm, a peak torque of 250 N·m between 1700-4400 rpm, accelerates from 0-100 km/h in 10.3 seconds, and has a combined fuel consumption of 6.6 liters per 100 km.

7

3

Share

What Causes the Gear Shift Jerk in Magotan?

Magotan gear shift jerk is caused by: 1. Reason one: The engine speed does not match the current vehicle speed, meaning there is a speed difference between the engine speed and the clutch plate speed. In most cases, the engine speed is lower than the clutch plate speed. 2. Reason two: The jerk is caused by the transmission itself or lack of transmission maintenance. Relevant information about gear shift jerk is as follows: 1. Gear shift jerk: It refers to the feeling of the car jerking forward or stuttering when shifting gears, which usually occurs during starting, accelerating, or decelerating gear shifts. 2. Impact of gear shift jerk on the car: There is a force interaction between the clutch and the engine, which can accelerate clutch wear. The impact of gear shifting can also damage the transmission gears, and the sudden engagement of the engine driving the transmission speed can lead to increased engine fuel consumption.

19

4

Share

What to Do When BMW Door Unlock Lights Don't Illuminate?

There are five possible scenarios when the door lights fail to illuminate upon opening: 1. Scenario One: Switch malfunction. 2. Scenario Two: Blown fuse. 3. Scenario Three: Short circuit in wiring. 4. Scenario Four: Some vehicles require activating the door light function near the sunroof/reading light before the door lights will illuminate upon opening. 5. Scenario Five: Poor contact between door and door switch. Here's an overview of BMW's advantages and disadvantages: 1. Advantages: Front-engine rear-wheel drive enables drifting (though wears tires faster), excellent performance with superb handling, advanced technology - many BMW innovations are adopted by other manufacturers years later. 2. Disadvantages: High price point, inconvenient maintenance due to limited 4S dealership network, and the brand's conspicuous nature attracts attention.

18

2

Share

What are the body dimensions of the Santana Zhijun?

Santana Zhijun has a body length of 4687mm, width of 1700mm, height of 1450mm, a wheelbase of 2656mm, minimum ground clearance of 115mm, and a curb weight of 1210kg. Below are the relevant details: Introduction to Zhijun's emission standards: The Santana Zhijun complies with China's National IV emission standard. The National IV standard for motor vehicle pollutant emissions primarily targets pollutants such as hydrocarbons (HC), nitrogen oxides (NOx), carbon monoxide (CO), and particulate matter (PM). By utilizing advanced technologies like improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, it controls and reduces vehicle emissions below specified thresholds. Introduction to Zhijun's powertrain performance: It features a MacPherson strut front suspension and a compound torsion beam rear suspension. The vehicle is equipped with a 1.6L naturally aspirated engine delivering a maximum horsepower of 95PS, peak torque of 140Nm, and maximum power output of 70kW, paired with a 5-speed manual transmission.

1

2

Share

What Causes a Car Charger to Lose Power?

Reasons for a car charger losing power: 1. The car charger is not properly installed; 2. The cigarette lighter or car charger is damaged. A car charger uses the car's cigarette lighter as a power socket to charge mobile phones directly. Since the voltage provided by the car is relatively low, the car charger only needs an overload protection circuit internally. There is a fuse at the front end of the car charger socket. When the current exceeds the overload protection circuit's capacity, the fuse immediately blows to provide protection. Precautions for using a car charger: 1. Do not use the car charger in humid environments; 2. The suitable temperature range is 0 to 45 degrees Celsius; 3. Keep it away from children; 4. Avoid lightning strikes; 5. Unplug the charger promptly after charging is complete.

9

0

Share

How to Open the Fuel Tank Cap on a Porsche Cayenne?

Open the driver's door, engage the Porsche Cayenne's handbrake to prevent the vehicle from rolling, pull the fuel tank cap switch located on the left side of the driver's leg area, lift the Porsche Cayenne's fuel tank cap outward, and unscrew the plastic cap of the fuel tank. Precautions for cleaning the fuel tank are as follows: 1. Note 1: After using the car for a period of time, perform a thorough cleaning and inspection of the fuel tank. When cleaning the fuel tank, rinse the interior with hot water, then dry it with compressed air to remove gasoline vapors inside the fuel tank. 2. Note 2: Then immerse the fuel tank in a 10% sodium hydroxide aqueous solution for cleaning. After soaking, rinse the interior and exterior of the fuel tank with running water. Alternatively, you can clean it with a 5% boiling caustic soda solution, followed by rinsing with hot water. 3. Note 3: If there is rust on the exterior of the fuel tank, clean it with a steel wire brush and then apply paint. After cleaning the fuel tank, perform a leak test by sealing all openings with rubber plugs and submerging the tank in water. Introduce compressed air through the fuel pipe connector hole. If bubbles emerge from any part, it indicates a leak. Mark the leak, remove the paint, and weld the area.

8

3

Share

What are the solutions when a Jinbei vehicle fails to start but has power?

What is the bulb model for the Buick Envision headlights?

What Causes the Gear Shift Jerk in Magotan?

What to Do When BMW Door Unlock Lights Don't Illuminate?

What are the body dimensions of the Santana Zhijun?

What Causes a Car Charger to Lose Power?

How to Open the Fuel Tank Cap on a Porsche Cayenne?

Which Honda model features automatic sliding doors and 7 seats?

What does car configuration reduction mean?

How to Find the Designated Parking Spot for Hill Start?

What is the maintenance interval for the CFMOTO 250SR?