What are the solutions when a car won't start?

2 Answers
StCarter
07/24/25 9:03pm
The solutions for a car that won't start are: 1. Check if the battery is dead and recharge it; 2. Inspect whether the fuel pump is damaged and repair it promptly if there's an issue; 3. Ensure there is sufficient fuel and add more if needed; 4. Check if the engine sensors are damaged; 5. Replace the spark plugs and ignition coils; 6. Use a heating rod to warm up the engine oil. The reasons why a car won't start include: 1. A dead car battery; 2. Low temperatures causing the engine oil's viscosity and rotation speed to decrease; 3. Problems with the ignition system; 4. Insufficient fuel in the car; 5. Excessive carbon buildup inside the vehicle's engine; 6. A damaged fuel pump preventing fuel from being supplied from the fuel tank for combustion.
Was this review help?
9
2
Share
LaSimon
08/10/25 2:30pm
My car wouldn't start in the residential garage, which was really frustrating. At first, I thought it was a battery issue, but after inspection, I found slight corrosion on the terminals. After cleaning, it worked fine. Common solutions for a car that won't start: First, don't panic, make sure you're in a safe location, engage the handbrake, and turn off the engine. Check if the battery connections are loose or rusty. If the headlights don't turn on, it might be a dead battery—you can jump-start it with a friend's car or call roadside assistance. If the lights are on but the engine doesn't crank, it could be a starter motor issue; sometimes gently tapping it can wake it up. Fuel pump problems are also common—listen for a humming sound when turning the key, which indicates the pump is working. It's advisable to carry a portable charger or emergency tools and test your battery health every six months to reduce the risk of winter freezing. These steps can help you quickly resolve the issue and avoid turning a minor problem into a major repair.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Does 'off' in a car mean on or off?

The 'off' in a car represents the closed state. There are multiple functions in a vehicle that use such markings, including the vehicle's automatic headlights, automatic wipers, and the ESP system. Conversely, 'on' represents the open mode. It is important to pay attention when using the function buttons on the vehicle. Below are three operation methods for the car's central control: 1. The first operation method is through physical buttons. 2. The second operation method is through a touchscreen. 3. The third operation method is through voice commands.
3
1
Share

Why doesn't the Baojun 360 dashboard display tire pressure?

The reasons why the Baojun 360 dashboard does not display tire pressure are: 1. Low transmission strength; 2. Insufficient receiver sensitivity; 3. Signal interference; 4. Module battery exhausted; 5. Module detection port blocked, preventing detection; 6. Module pairing failure; 7. Module damaged. The Baojun 360 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99 PS, maximum power of 73 kW, and maximum torque of 143 Nm, paired with a 6-speed manual transmission.
14
5
Share

Where is the ECU located in a Chery A5?

Chery Tiggo 5's engine control unit (ECU) is located in the U-slot on the passenger side. Definition of automotive ECU: An automotive ECU is an electronic device that automatically processes input signals from various sensors according to predetermined programs, then outputs signals to actuators to control vehicle operation. Composition of automotive ECU: The main component of an automotive ECU is a single-chip microcomputer, which is a circuit board integrating microprocessor (CPU), memory, and input/output interfaces. The microprocessor serves as the core component - it converts input analog signals into digital signals, compares them with stored reference data for processing, calculates output values, and controls actuators after power amplification of output signals.
9
0
Share

Where is the ignition keyhole of the Baojun 510?

The ignition keyhole of the Baojun 510 is located on the right side of the steering wheel, which is a common position. It should be noted that some models come with a push-button start system, and these models do not have an ignition keyhole. Therefore, for push-button start models, you don't need to insert the key into the keyhole to start the car—simply press the brake and click the push-button start. The Baojun 510 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99 PS, a maximum power of 73 kW, and a maximum torque of 135 Nm, paired with a 6-speed manual transmission.
18
3
Share

Disconnect the Positive or Negative Terminal When Removing a Car Battery?

The correct removal procedure is to disconnect the negative terminal first. If the positive terminal is removed first, a short circuit may occur. A short circuit refers to the direct connection of the positive and negative terminals without any resistance. The phenomenon of sparking can occur for the following reasons: 1. If only the positive terminal is removed, a conductive metal object (such as a tool) coming into contact with the car body and the positive terminal will directly connect the positive and negative terminals, allowing a large current to flow and causing a short circuit. 2. If the negative terminal is disconnected first, no current will flow, so a short circuit will not occur unless a tool connects the positive and negative terminals together.
19
5
Share

Where are the positions of the accelerator, brake, and clutch?

The accelerator, brake, and clutch are located below the cockpit, arranged from left to right as clutch, brake, and accelerator. The functions of the clutch are: 1. Gradually increase the driving force of the car to allow for a smooth start; 2. Temporarily separate the engine and transmission for gear shifting; 3. Prevent overload of the transmission system; 4. Reduce torsional vibration impact from the engine, extending the lifespan of transmission gears. The function of the brake is to reduce speed or bring the vehicle to a stop. The functions of the accelerator are: 1. Control the engine speed by adjusting the pedal pressure; 2. The accelerator controls the carburetor to determine the engine's output power.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.