What are the solutions to traffic congestion?

1 Answers
RobertDella
09/06/25 5:08am
Solutions to traffic congestion are as follows: 1. Increase road capacity: This is the most fundamental method to address traffic congestion, including widening existing roads or constructing new ones. As car usage increases, more roads are needed to accommodate the flow of vehicles. 2. Reduce road intersections: This method includes elevated roads, underground roadways, and the elevation of existing railways. This is also a way to increase capacity. 3. Restrict vehicle access: Some cities implement odd-even license plate policies, allowing only vehicles with odd-numbered or even-numbered plates to enter on specific days (e.g., Beijing, Hangzhou). Other cities may restrict access for specific vehicles, such as large trucks.
Was this review help?
4
1
Share
More Forum Discussions

What causes a car to start and then stall after one or two seconds?

The reasons why a car starts and then stalls after one or two seconds include: 1. The installed anti-theft system is not deactivated, which can be resolved by deactivating it; 2. A dirty throttle or excessive carbon buildup in the intake tract, which can be fixed by cleaning the throttle or intake tract carbon deposits; 3. Check the ignition system, especially the ignition coil, to see if there are any issues; 4. Insufficient fuel in the tank, leading to low fuel pump pressure; 5. One or more clogged fuel injectors, which can be cleaned; 6. Leaking spark plug wires; 7. Engine malfunction; 8. Poor fuel quality—always refuel at reputable gas stations. It is recommended to pay attention to regular maintenance and have periodic checks at a 4S shop.
11
4
Share

What does 180turbo mean?

180turbo refers to a 1.0T turbocharged engine. The following is an introduction to turbocharging: 1. Turbocharging is a technology that uses the exhaust gas generated by internal combustion engine operation to drive an air compressor. 2. The main function of turbocharging is to increase the engine's air intake, thereby improving the engine's power and torque, making the car more powerful. 3. After installing a turbocharger, the maximum power of an engine can increase by 40% or more compared to when it is not equipped with a turbocharger. This means that the same engine can output greater power after being turbocharged.
7
3
Share

What is the National Emission Standard for VI Vehicles?

"National VI" refers to vehicles compliant with the National VI emission standard. Below is a partial introduction to the National VI standard: 1. National VI is the "China 6 Motor Vehicle Pollutant Emission Standard," which includes emission limits and measurement methods for light-duty vehicles and emission limits for heavy-duty diesel vehicles. 2. Currently, the National VI standard is divided into two phases: "National VIa" and "National VIb," with plans to implement them nationwide uniformly in 2020 and 2023, respectively. 3. The National VI standard, or the "China 6 Motor Vehicle Pollutant Emission Standard," was established to enforce environmental protection laws, reduce and prevent vehicle exhaust pollution, protect the ecological environment, and ensure human health.
1
0
Share

How to Install Wheel Arch Clips?

Here is the installation method for car wheel arch clips: 1. First, use a small clip strip to hook onto the inner small flange. 2. Then, insert it into the installation hole of the wheel arch. 3. Finally, fasten it and give it a pull to check. Below is a brief introduction to car wheel arches: Wheel arch, short for car wheel arch, refers to the chrome-plated bright strip along the upper edge of the tire, which is a semi-circular component protruding from the fender above the car tire. It is composed of half steel plate and half plastic, and is the same for both front and rear wheels. The main function of the wheel arch is for decoration and to meet the driver's personalized needs. Additionally, from an aerodynamic perspective, the wheel arch also conforms to fluid mechanics, helping to reduce the drag coefficient.
13
0
Share

What are the methods to deal with overfilled coolant?

You can directly use a syringe to extract the excess coolant until the liquid level is below the maximum mark (MAX). Below are three precautions for refilling coolant: 1. Always pay attention to the scale mark when refilling coolant to avoid overfilling or underfilling. 2. Overfilled coolant: Under continuous high-temperature operation of the car, the excess coolant is prone to overflow from the pressure relief valve (due to thermal expansion). 3. Underfilled coolant: It fails to achieve the cooling effect, making it easy for the temperature to rise excessively during high-speed operation. Additionally, the viscosity of the engine oil will decrease, leading to wear and tear on engine components over time.
1
0
Share

What Are the Causes of Abnormal Noises in CVT Transmissions?

Identifying abnormal noises can be divided into the following steps: 1. Noises heard during vehicle startup are generally related to suspension system issues: possibly caused by loose or damaged engine mounts. 2. Noises during vehicle turning may stem from steering or suspension system problems: as the vehicle tilts during turns, the suspension system deforms and participates in the motion. 3. Noises during smooth road driving could indicate brake system component failures: possibly due to loose or worn brake components, out-of-round brake drums, or uneven brake discs. 4. It might also be an issue with the bearings connecting moving and stationary parts: if it's a bearing problem, the driver can distinguish it by applying slight braking. If the noise remains unchanged during uniform motion with braking, it indicates a bearing issue.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.