What are the solutions to reduce noise in the Fit?

1 Answers
SanJanelle
07/29/25 9:59pm
The solutions to reduce noise in the Fit are: 1. Install sound-absorbing foam material under the engine hood; 2. Apply sound-absorbing cotton material to the trunk, the bottom of the trunk, and the wheel arches on both sides of the trunk; 3. Install professional damping plates in areas prone to noise; 4. Install sealing strips inside the doors; 5. Replace the tires with quieter ones. Taking the 2020 Fit as an example, its body dimensions are 4096mm in length, 1695mm in width, and 1525mm in height, with a wheelbase of 2350mm and a fuel tank capacity of 40 liters. This model is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131 PS, a maximum power of 96 kW, and a maximum torque of 155 Nm, paired with a 5-speed manual transmission.
Was this review help?
19
5
Share
More Forum Discussions

How to turn on the air conditioning in a Mercedes-Benz C260L?

Mercedes-Benz C-Class typically adjusts the automatic air conditioning to a suitable temperature based on the interior and exterior temperatures. If the driver has specific needs, manual adjustments can also be made. Additionally, pressing the AC button will activate the cold air, and turning the knob towards the blue area will increase the cold air output. Below are some related details: 1. Compressor: The AC in a car's air conditioning system is the switch for the compressor, essentially controlling the delivery of cold air. A car's air conditioning system includes not only the compressor but also components like the condenser, evaporator, and expansion valve. However, the compressor is one of the most critical parts of the refrigeration system, responsible for compressing and transporting refrigerant vapor. 2. Precautions: Turning on the air conditioning increases engine load and fuel consumption. Moreover, when using the air conditioning for extended periods, it's advisable to open the windows occasionally for ventilation.
14
1
Share

Are charging piles for all new energy vehicles universal?

In theory, charging piles for all new energy vehicles can be universal. According to the new national standard, the standards for charging plugs of different vehicle models will be the same in the future. Although there may be differences in voltage and power, they can theoretically be used on the same charging pile. Here is some relevant information about charging new energy vehicles: 1. Charging standards: China's electric vehicle charging interface and communication protocol standards GB/T20234-2011 include: GB/T20234.1-2011, GB/T20234.2-2011, GB/T20234.3-2011, and GB/T27930-2011. The release of these four standards marks the unification of charging interfaces at the national level in China. 2. Industry evaluation: After the release of the national standards, newly built charging facilities have been manufactured and installed in accordance with the national standards, and existing charging facilities are gradually updating their interfaces to achieve standardization. However, the current national standards only cover relatively basic aspects such as sockets and interfaces, and there is no unified standard for technical parameters in key parts of electric vehicles, such as voltage and power. The industry's evaluation is that some parameter definitions are vague and the standards are not mandatory.
6
1
Share

How to Close the Engine Hood on a Corolla?

When closing the engine hood on a Corolla, first lower the front hood support rod. With your other hand, hold the hood and slowly move it downward. When the hood is about 30 centimeters from closing, release it to allow it to fall freely. A "clunk" sound indicates that it is locked. If you don't allow the hood to fall freely, it may not close properly. Below are the functions of the engine hood: 1. Airflow Guidance. For objects moving at high speed in the air, the air resistance and turbulence generated around the object can directly affect its trajectory and speed. The shape of the engine hood can effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the vehicle. Through guidance, air resistance can be decomposed into beneficial forces, increasing the downforce on the front wheels and improving driving stability. 2. Protection of the Engine and Surrounding Components. Beneath the engine hood lie critical components of the car, including the engine, electrical circuits, fuel lines, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and construction of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. 3. Aesthetics. The exterior design of a vehicle is a direct reflection of its value. As an important part of the overall appearance, the engine hood plays a crucial role in enhancing visual appeal and embodying the concept of the entire car.
3
4
Share

What is an Automotive Chip?

An automotive chip is an integrated circuit formed by a large number of microelectronic components (such as transistors, resistors, capacitors, etc.) placed on a plastic substrate to create a single chip. Below is an introduction to automotive chips: 1. A chip, generally referred to as a semiconductor component product, is also known as an integrated circuit; 2. Automotive chips are mainly divided into three categories: functional chips, power semiconductors, and sensors; 3. Functional chips primarily refer to processor and controller chips; 4. For a vehicle to operate on land, it relies on an electronic and electrical architecture for information transmission and data processing. The vehicle control system mainly includes several major parts: the body electronic system, vehicle motion system, powertrain system, infotainment system, and autonomous driving system. Under these systems, there are numerous sub-functions, each of which is supported by a controller. Inside each controller, there is a functional chip.
2
2
Share

Is the Electronic Annual Inspection Label Recognized by Traffic Police?

The electronic annual inspection label is recognized by traffic police. On June 20th, the nationwide implementation of electronic annual inspection labels was fully rolled out. After passing the annual inspection, vehicle owners will receive an electronic label. During inspections, only the electronic annual inspection label needs to be presented, eliminating the need to stick a paper label on the windshield. Below are the methods to present the electronic annual inspection label: 1. Online Presentation: When traffic police request to check the electronic annual inspection label, you can directly open the Traffic Management 12123 APP for online presentation. 2. Offline Presentation: During a traffic stop, you can present a screenshot of the label. 3. Printed Presentation: You can also print the electronic annual inspection label by saving a screenshot of the QR code and carrying it with the vehicle for immediate use when needed. All methods are equally valid.
2
5
Share

How Many Years Can a Sedan Be Driven Before Scrapping?

There is no usage lifespan limit for sedans. When the normal driving mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. Vehicle scrapping process: 1. The car owner applying for scrapping and renewal should fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix the owner's seal. 2. Apply at the registration acceptance counter. For vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age but are deemed to meet the scrapping standards after inspection by the vehicle inspection counter, a "Vehicle Scrapping Notice" will be issued. 3. The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". 4. After verifying the "Notice", the recycling company will dismantle the vehicle and take photos. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. 5. The vehicle owner should submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates will be reclaimed, and the application will be submitted for approval according to regulations to complete the scrapping registration.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.