What are the solutions for Wuling Zhiguang noise issues?

1 Answers
Michelle
07/29/25 10:08pm
Wuling Zhiguang noise solutions include: 1. Adjusting the valve clearance; 2. Replacing the spark plugs; 3. Reinforcing the noise insulation strips inside the vehicle; 4. Controlling the driving speed, keeping it under 90 km/h. Taking the Wuling Zhiguang 2020 1.2L Utility Model National VILS as an example, its dimensions are 3797 mm in length, 1510 mm in width, and 1820 mm in height, with a wheelbase of 2500 mm and a fuel tank capacity of 38 liters. In terms of power, the Wuling Zhiguang 2020 1.2L Utility Model National VILS is equipped with a 1.2L naturally aspirated engine, delivering a maximum power of 56 kW and a maximum torque of 108 Nm.
Was this review help?
5
4
Share
More Forum Discussions

Can You Continue Driving When the Car Engine Overheats?

You cannot continue driving when the car engine overheats. After the engine overheats, it requires a cooling period of one and a half hours. Radiator Leakage: A broken or improperly connected radiator hose can cause leakage, which will obstruct the water circulation and, in severe cases, lead to engine "boiling over." Insufficient Coolant: Prolonged water circulation during engine operation can gradually deplete the coolant in the engine's cooling system, resulting in a lack of water in the radiator. If the owner fails to promptly inspect, detect, and replenish the coolant, it can easily cause the engine to overheat. Thermostat Malfunction: The thermostat is a device that controls the flow path of the coolant. If it becomes stuck or fails, the engine's large and small circulation cycles will inevitably be affected, preventing the effective dissipation of the engine's heat.
14
4
Share

Do fuel-powered scooters require a driver's license?

Fuel-powered scooters require a driver's license. Classification of fuel-powered scooters: In the "Traffic Law," there are clear regulations for electric scooters, which are classified as non-motor vehicles; however, there are no explicit regulations for fuel-powered scooters. According to the standards of the "Technical Requirements for Safe Operation of Motor Vehicles," fuel-powered scooters should be classified as light motorcycles. The "Technical Requirements for Safe Operation of Motor Vehicles" defines "light motorcycles" as: "Two or three-wheeled vehicles with a maximum speed not exceeding 50 kilometers per hour, regardless of the driving method, and with an engine displacement not exceeding 50 milliliters if an internal combustion engine is used. Implementation standards: According to these regulations, many fuel-powered scooters exceed 50 kilometers per hour, so these vehicles cannot be classified as light motorcycles and indeed fall under the category of motor vehicles. According to the "Road Traffic Safety Law," drivers should register and license their vehicles with the traffic management department, obtain a driver's license, and drive on motor vehicle lanes. Violations should also be penalized as motor vehicle scooters.
13
2
Share

What is the fuel consumption of the Exeed TX 4WD?

Exeed TX 4WD currently consumes 7 liters per 100km (actual measured fuel consumption). In urban areas, it's around 9 liters per 100km and generally doesn't exceed 10. How to calculate car fuel consumption: Fill up the car's gas tank completely and reset the odometer. After driving for a period, refill the tank and note how many liters were added. Then divide the amount of fuel added by the distance traveled to get the fuel consumption per kilometer. Reasons for high fuel consumption: Driver's skill level, improper gear shifting and excessive braking during driving can artificially increase engine power loss. Frequent braking leads to more starts, and starting consumes significantly more fuel. Driving at low temperatures - engines are designed to operate at normal temperatures. If driven without proper warm-up, the engine runs cold, resulting in poor fuel atomization and incomplete combustion.
12
5
Share

Is the BMW i8 a pure electric or hybrid vehicle?

BMW i8 is a pure electric vehicle. The BMW i8 features a pure electric driving mode, offering exceptional quietness and agility when operating in this mode. Introduction to Pure Electric Vehicles: Pure electric vehicles refer to vehicles powered by onboard power sources, using electric motors to drive the wheels, meeting all requirements of road traffic and safety regulations. Due to their relatively smaller environmental impact compared to traditional vehicles, their prospects are widely optimistic, though current technology is not yet mature. Components of Electric Vehicles: The components of electric vehicles include the electric drive and control system, mechanical systems for drive force transmission, and working devices for completing specified tasks. The electric drive and control system is the core of an electric vehicle and the most significant difference from internal combustion engine vehicles. The electric drive and control system consists of the drive motor, power source, and motor speed control device, among others. Other components of electric vehicles are largely the same as those in internal combustion engine vehicles.
12
1
Share

What is the difference between CLTC and NEDC?

The biggest difference between CLTC and NEDC is that the CLTC test cycle yields a longer range than NEDC. The differences between the two are as follows: NEDC: The NEDC range test standard is not only outdated but also significantly differs from actual road conditions in China compared to Europe. This discrepancy means that a vehicle might achieve 500 km in NEDC testing, but consumers may only get 400 km or even less in real-world usage. Conditions like highway driving or using air conditioning can further reduce the range. CLTC: CLTC was developed under the leadership of the Ministry of Industry and Information Technology, with the China Automotive Technology and Research Center organizing industry experts for a three-year research and development effort. It involved data from 41 representative cities, nearly 4,000 vehicle models, and over 30 million kilometers of driving data to finalize the test standard. Directly speaking, the CLTC test cycle covers a broader and more comprehensive range of conditions and has a longer duration.
13
1
Share

What is the weight of the Baojun 630?

Baojun 630 models have a curb weight of 1206 kg for the manual version and 1220 kg for the automatic version. Introduction to vehicle weight: Vehicle weight refers to the weight of the car itself. Since the vehicle is affected by gravity, all its performance characteristics will be influenced. If a car is too heavy, its speed cannot be fully utilized; if it's too light, stability is reduced. Therefore, there are pros and cons to each, so careful consideration of vehicle weight is necessary when choosing a car. Lighter vehicles accelerate faster, but steering becomes more sensitive, making them prone to skidding or drifting during turns, which can also result in slower cornering speeds. Heavier vehicles don't necessarily accelerate slowly; with increased torque, acceleration can still be very quick. Impact of vehicle weight differences: Generally, small cars are lighter than large cars. Differences in components such as chassis, tires, soundproofing materials, and seat materials can all contribute to variations in vehicle weight.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.