What Are the Solutions for Unpleasant Odors in Car Air Conditioning?

1 Answers
McMaci
07/29/25 5:09pm
Here are the solutions for unpleasant odors in car air conditioning: 1. First, you can replace the air conditioning filter. 2. Clean the evaporator box. 3. Find an open, sunny environment, open the car doors, turn on the natural air, set the air conditioning to maximum external circulation (without turning on the air conditioning) or turn on the heater, and blow for 5 to 6 minutes to expel the dust. 4. Finally, perform a thorough cleaning and disinfection of the air conditioning system to eliminate the odor. Additional Information: The air conditioning filter needs to be cleaned and replaced regularly. Bacteria left in the air ducts can also cause the air conditioning to emit odors. A simple method to remove odors from the ducts is to use an air duct cleaner. The cleaning method is also straightforward: park the car in an area with good air quality, turn on the external circulation switch, set the air conditioning to natural ventilation mode, then evenly spray the cleaner into the air vents. After a few minutes, open the windows and turn on the air conditioning to ventilate thoroughly.
Was this review help?
1
1
Share
More Forum Discussions

What type of oil should be used for a gasoline generator?

Gasoline generator oil can be categorized into summer oil, winter oil, and all-season oil. Therefore, the type of oil to use depends on the generator model and the regional environment where it is operated. It is best to follow the specifications outlined in the generator's user manual. More details are as follows: Function of oil: Oil serves to reduce friction, assist in cooling, prevent corrosion and rust, provide cushioning, and dampen vibrations in the engine. It is often referred to as the "lifeblood" of the generator. Working principle: Inside the engine, between the piston and cylinder, an oil film is necessary to prevent excessive wear on these components. Oil forms a sufficiently thick film to separate the surfaces of these moving parts, reducing wear. Additionally, since oil operates at a lower temperature, it helps dissipate heat by carrying it back to the oil tank, thus aiding in cooling the engine.
5
3
Share

What does MOT mean in the automotive industry?

In the automotive industry, MOT stands for Moment of Truth, which is a critical moment in the industry. MOT is a key performance indicator that specifically measures customer orientation, as customers tend to remember only these pivotal moments. There is a significant branch in satisfaction research called Moment of Truth (MOT) research, a technique frequently used in human-centric services for satisfaction analysis. Promoting MOT may yield the following expected benefits: Standardization of service quality: improving service levels and reducing service disputes; Training high-quality employees: through comprehensive MOT training, employees genuinely care for customers and enhance their problem-solving skills; Strengthening interpersonal relationships: during service interactions, employees engage in personal marketing with customers, expanding their personal networks; Improving work efficiency: assisting frontline employees in providing complete responses and handling customer inquiries promptly.
16
1
Share

What should be noted when getting car repairs at 4S shops through insurance?

When getting car repairs at 4S shops through insurance, you should pay attention to the following: Ownership of replaced parts: Some car owners may want to keep the damaged parts for resale or collection. Regardless of the motive, the replaced parts cannot be retained by the car owner. Insurance companies require the recovery of all replaced components. If any part is missing, the insurance company may refuse to cover its cost, leaving the 4S shop to pay out of pocket. Check for interior stains: During repairs at a 4S shop, the car interior may be handled by many people, potentially leaving dirty fingerprints. Therefore, carefully inspect the interior condition. If stains are found, request the 4S shop to clean them. Verify mileage discrepancies: After the car is towed to the 4S shop, the current mileage is recorded on the repair order. When signing the repair order upon pickup, compare the odometer reading with the recorded mileage to ensure no significant discrepancies. Check for missing items: To repair certain components, 4S shop technicians might remove some items from the car and forget to return them after repairs. Always check that all personal items are accounted for.
10
5
Share

What are the hazards of installing a front strut bar on a car?

After installing a front strut bar on a car, there will be noticeable stiffening of the front end and reduced flexibility. Below are specific details about car strut bars: Introduction to strut bars: The full name of a strut bar is the front shock absorber top link, commonly known as a balance bar in car modifications, also referred to as a strut bar or front strut bar. The English meaning of 'bar' refers to a link or rod. Function of strut bars: Their purpose is to increase body rigidity and enhance stability during cornering. Strut bars are mainly installed on the front suspension of sedans and significantly improve handling, making them one of the most effective modifications available.
10
0
Share

What Causes Car Key Jamming?

Below are the specific reasons for car key jamming: Improper steering wheel angle: After starting the vehicle with the key, the steering wheel automatically unlocks. Sometimes, when parking, the steering wheel is positioned at a certain angle where turning the key to ignite the engine is possible, but unlocking isn't, resulting in the key not turning. You can gently turn the key with your right hand while lightly rotating the steering wheel with your left hand to naturally unlock it. Steering wheel lock: When the car is turned off, if the steering wheel is turned left or right or the wheels aren't straight when parked, any force applied can cause the steering wheel to rotate, triggering the auto-lock function. This causes the steering lock pin and steering column to engage, making the steering wheel immovable. Even inserting the key and applying force won't turn it. This is the vehicle's anti-theft system detecting a potential theft risk, thus locking the steering wheel to serve its anti-theft function.
20
1
Share

What causes incorrect camshaft allocation in the EA888 engine?

The occurrence of EA888 fault codes is mostly due to discrepancies in data transmission between the Hall sensor and the crankshaft position sensor. Below are the relevant explanations: Incorrect timing: When this situation occurs, check whether the timing is correct. Do not just look at the surface phenomenon. Some vehicles' crankshaft pulley may have skipped teeth, but this was not noticed when replacing the belt. Due to issues with the intake side of the bearing bridge, the intake camshaft side of the bearing bridge seat is approximately 1.72mm lower than the normal part. Slower regulator response: When the engine operating conditions reach the adjustment speed, the regulator response speed may slow down due to misalignment of the oil passages.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.