What are the solutions for the loud noise in the Leopaard CS10 panoramic sunroof?
2 Answers
The solutions for the loud noise in the Leopaard CS10 panoramic sunroof are: 1. Lack of lubrication in the sunroof guide rails, which can be resolved by applying some lubricant; 2. Loose screws inside the sunroof, which can be fixed by tightening them; 3. Increased gaps between sunroof components causing noise, which can be addressed by installing buffer washers. The Leopaard CS10 is the flagship model of Leopaard Motors in the urban SUV segment, with a body size of 4719mm in length, 1875mm in width, and 1700mm in height, and a wheelbase of 2700mm. It is equipped with a 2.0T engine, delivering a maximum power of 130kw and a peak torque of 250nm.
As an owner of the Leopaard CS10, I also encountered a loud noise issue with the panoramic sunroof last year. The noise was particularly annoying when driving on bumpy roads, affecting my mood while driving. I first tried handling it myself: after closing the car door, I used a soft brush to clean the dust and small stones from the sunroof tracks, then vacuumed them clean. Next, I sprayed a dedicated sunroof lubricant, applying it evenly along the tracks—avoiding regular oil to prevent corrosion. During the process, I gently slid the sunroof a few times to distribute the lubricant evenly. If the sealing strip appeared old and wrinkled, it might cause leaks or noise; buying a matching replacement online isn’t difficult. For prevention, I usually park in the shade to reduce heat-induced aging and clean around the sunroof during car washes. If the noise persists, it might be due to loose frame screws—try tightening them with a wrench. If all else fails, visit a 4S店; the cost isn’t high, and it’s hassle-free. Now, my car is much quieter.
