What are the solutions for the abnormal noise in the Lamando's sunroof?

1 Answers
AveryFitz
07/29/25 8:25pm
Solutions for the abnormal noise in the Lamando's sunroof are as follows: 1. Wipe the sunroof slide rails with a soft cloth. 2. Apply butter to the rails. 3. For rubber or plastic parts, clean the surface and apply talcum powder for protection. 4. Regularly check the sunroof and tighten any loose screws. Causes of the abnormal noise in the Lamando's sunroof are as follows: 1. Aging of the sunroof rubber seal or sealing ring. 2. Loose screws in the sunroof. 3. Presence of dust particles in the sunroof slide rails. Functions of the sunroof are as follows: 1. Enhances interior ventilation. 2. Renews the air inside the car. 3. Provides an escape route through the sunroof in case the doors cannot be opened during an emergency.
Was this review help?
13
5
Share
More Forum Discussions

What are the differences between C1, C2, and C3 driver's licenses?

C1, C2, and C3 driver's licenses have the following differences: 1. Vehicles used in the test: C1 test is conducted with a manual transmission car, C2 test with an automatic transmission car, and C3 test with a low-speed truck. 2. Permitted vehicle types: A C1 license allows driving manual or automatic transmission passenger cars with 9 seats or fewer, including small and micro passenger cars, as well as light, micro trucks, and light, small, micro special-purpose vehicles. A C2 license only permits driving small and micro automatic transmission passenger cars and light, micro automatic transmission trucks. A C3 license allows driving low-speed trucks.
20
2
Share

Where is the drainage hole outlet located on the classic Focus?

Here is the relevant introduction about the drainage hole outlet location on the classic Focus: 1. Ford Focus sunroof drainage holes: Located inside the vehicle's fender. Requires tire removal for visibility. 2. Car sunroofs can be broadly categorized into: sliding-out type, built-in type, built-in flip-up type, panoramic type, and curtain type. Mainly installed on commercial SUVs, sedans and other vehicle models. 3. Additional information: For sunroof maintenance, regular cleaning with fine talcum powder can be used. This extends the service life of sealing rings. The moving parts of sunroofs are made of low-maintenance materials. Mechanical parts should be regularly cleaned with machine oil or lubricant. It's recommended to clean every two months.
8
5
Share

Why Do Valves Open Early and Close Late?

The reason valves open early and close late is that after combustion in the cylinder, both pressure and temperature are very high. Even a small gap allows gases to escape, so even if the piston is moving toward the bottom dead center, gases continue to be expelled. Early valve opening helps with scavenging, allowing exhaust gases to be expelled more thoroughly while fresh gases cool the cylinder block, preventing fatigue. Valves are a critical component of an engine, responsible for introducing air into the engine and expelling post-combustion exhaust gases. Structurally, engine valves are divided into intake valves (inlet valve) and exhaust valves (exhaust valve). The intake valve's role is to draw air into the engine for mixing with fuel and combustion, while the exhaust valve expels combustion gases and dissipates heat. The purposes of early valve opening and late closing: Early intake valve opening aims to provide a larger opening or cross-sectional area at the start of intake, reducing intake resistance for smoother airflow. Late intake valve closing leverages the inertia of the airflow to continue intake during the intake lag angle, increasing the intake volume. Reduced intake resistance not only boosts intake volume but also lowers power consumption during the intake process. Early exhaust valve opening ensures high cylinder pressure when the valve opens, allowing exhaust gases to escape rapidly and in large quantities within a short time. By the time the piston begins the exhaust stroke, cylinder pressure has significantly dropped, and the exhaust valve opening or cross-sectional area increases noticeably, reducing forced exhaust resistance and power consumption. Late exhaust valve closing utilizes the inertia of exhaust flow to continue expelling gases during the exhaust lag angle, minimizing residual exhaust gas in the cylinder.
4
4
Share

What is the engine model of the Wuling Hongguang S3?

The Wuling Hongguang S3 is equipped with two engine models: LAR and LJO. The vehicle comes with two engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 1.5-liter naturally aspirated engine delivers a maximum power of 73 kW and a maximum torque of 140 Nm, achieving peak torque between 3,400 and 4,400 rpm. It features DVVT technology and multi-point fuel injection. The 1.5-liter turbocharged engine produces a maximum power of 108 kW and a maximum torque of 250 Nm, with peak torque available between 2,200 and 3,400 rpm. It utilizes multi-point fuel injection and is paired with a 6-speed manual transmission.
17
0
Share

How often does 12123 update traffic violation records?

12123 typically updates traffic violation records within 3-7 days under normal circumstances. There are several methods to query motor vehicle violations: 1. Terminal: Visit the office halls of traffic police branches in various districts and counties to query through touch-screen terminals. 2. Website: Log in to the external service websites of municipal public security traffic management bureaus. 3. Phone call: Dial the voice inquiry hotline. 4. SMS: Query violations by composing mobile text messages. 5. License plate: Use traffic violation query tools by entering license plate information. 6. Official website: Log in to the official websites of municipal public security traffic management bureaus and enter the license plate number, last 4 digits of the engine number, or last 6 digits of the VIN to query.
13
4
Share

Does Caliper Painting Affect Safety?

Painting the brake calipers of a car does not affect safety. Relevant information is as follows: 1. Introduction: A brake caliper is a clamping device that functions to slow down, stop, or maintain the stopped state of moving wheels, generally used only in disc brake systems. 2. Working Principle of Disc Brakes: It serves the role of the brake caliper. 3. Composition: The disc brake on a car consists of a brake oil pump connected to the wheel, a brake disc, and the brake caliper on the disc. During braking, high-pressure brake oil pushes the piston inside the caliper, pressing the brake pads against the brake disc to generate the braking effect. 4. Classification: Disc brakes are divided into two types: standard disc brakes and ventilated disc brakes. Ventilated disc brakes have a gap left between the two brake discs.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.