···
Log in / Register

What are the solutions for scratched car glass?

3 Answers
McLuke
09/03/25 6:32am
The solutions for scratched car glass are: 1. Apply toothpaste to a cloth and rub the scratched area; 2. Mix ammonia with water, dip a cloth into the solution, and wipe the scratched area; 3. Use a repair tool to fix the scratches. Methods for maintaining car glass: 1. Use dedicated wiper blades and replace them in time to avoid scratching the windshield; 2. Use car-specific glass cleaner for a smoother finish and to reduce wear on the car glass; 3. Do not use wipers to remove debris from the windshield; use a towel instead; 4. During rain, use wipers to wipe away dust and other particles; 5. When attaching labels to car glass, use static cling film to prevent scratching the windshield when removing adhesive residues.
Was this review help?
13
0
Share
LaPeyton
09/15/25 7:58am
Scratches on car windows can indeed be frustrating. I recently encountered this issue myself, and the solution is to first assess the depth of the scratches. If it's just minor scratches, like fine lines left by windshield wipers, you can fix them yourself using regular white toothpaste or commercially available car glass polish: apply it to the scratched area, rub in circular motions with a soft cloth for a few minutes, then rinse with clean water. This can significantly reduce the appearance of light scratches, making them almost invisible—saving money and time. However, if the scratches are deep or you can feel grooves with your fingernail, it's best to consult a professional shop. They might recommend replacing the entire glass for safety. For prevention, I've learned to park away from areas with branches or excessive dust and to clean the wipers regularly to avoid sand-induced scratches. These small habits can extend the life of your windshield and reduce the need for frequent repairs. In short, DIY polishing works for minor issues, but avoid forcing a fix to prevent further damage.
Was this review help?
12
4
Share
Expand All
SanAmy
10/29/25 8:37am
The solution to scratched glass depends on the severity of the damage. Light scratches can be easily fixed with polishing tools: purchase some automotive glass polishing compound, apply it after cleaning the surface, and polish in circular motions for five minutes at a steady speed. Wipe it clean, and the effect will be noticeable. However, deep scratches or cracks pose a higher risk for DIY repairs, and it's best to seek professional help from a reputable repair shop for polishing or glass replacement. I learned this the hard way—like when my wipers dragged sand and left a bunch of scratches, eventually costing me some money for a new windshield, but it was much safer. Regular maintenance is crucial: keep wipers and windows clean using soft cloths, avoiding hard objects. A preventive tip is to avoid parking near branches to prevent wind-blown scratches. When dealing with scratches, take your time to avoid making things worse.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

Can You Steer with One Hand in Subject Three?

Subject Three does not allow steering with one hand. Here are the specific details: 1. Regulation: While driving, except for necessary operations like shifting gears, both hands must not leave the steering wheel. The left and right hands should be placed at the "nine o'clock" and "three o'clock" positions on the steering wheel, respectively. 2. Reason: If the steering wheel is viewed as a clock face, the correct hand position is for the left hand to grip between nine and ten o'clock and the right hand between three and four o'clock. In the event of a collision, this posture is more conducive to supporting the body. If only four fingers are used to grip the steering wheel with the thumb extended and resting on it, when the wheel hits a rock or a high curb, the front wheel may suddenly turn to one side, causing the steering wheel to rotate rapidly, which could potentially break the thumb.
10
3
Share

Can You Start in Second Gear for Subject 3?

Subject 3 does not allow starting in second gear. Here are the details: 1. Introduction: Subject 3, also known as the Road Safety Driving Test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe civilized driving knowledge test in the motor vehicle driver's examination. 2. Gear Selection: Turning: Use second gear, signal three seconds in advance, and try to keep second gear for less than 20 seconds. U-turn: Change to the opposite fast lane, accelerate, and shift to third gear. Pull over: Do not release the clutch, shift to first gear. Upshift indicators: 1st to 2nd (10 km/h); 2nd to 3rd (20 km/h); 3rd to 4th (30 km/h); 4th to 5th (40 km/h). Downshift indicators: 5th to 4th (30 km/h), 4th to 3rd (25 km/h), 3rd to 2nd (20 km/h), 2nd to 1st (10 km/h).
15
4
Share

Can I Apply the Brake to Slow Down When Pulling Over in Subject Three?

Yes, you can apply the brake to slow down when pulling over in Subject Three. Here are the details: 1. Reason: From a rule perspective, there is no prohibition against using the clutch to control speed, so using the clutch to regulate speed is acceptable. After the pull-over instruction is given, applying the brake counts as stopping, indicating that the examinee has completed the required action, hence the requirement to use the clutch for speed control. 2. Exam Tips: During the Subject Three test, try to avoid prolonged semi-clutch operation, as this can easily cause the engine to stall, leading to test failure. Especially when completing maneuvers like U-turns or pull-overs that require slow speeds, using first gear at idle speed is relatively safer than semi-clutch (semi-engagement). Pulling over is not difficult; it mainly depends on the individual's ability to judge the distance from the side line, and controlling speed with the brake is sufficient.
6
5
Share

What is the reason for failing to engage the gear twice consecutively in Subject Three?

Failing to engage the gear twice consecutively in Subject Three may be due to not releasing the hand immediately after shifting but instead pulling the gear again, thus being judged as failing to engage the gear twice consecutively. Below are the specific details: 1. Changing lanes: Before changing lanes, observe and assess the traffic flow behind, beside, and in the lane you intend to change to. After confirming safety, turn on the turn signal, and then check again through the rearview mirror to see if any vehicles are overtaking on both sides of the road. Ensure there is a safe distance allowed in the lane you are about to enter. Without hindering the normal flow of traffic in that lane, smoothly steer into the desired lane and then turn off the turn signal. 2. Gear introduction: Use first gear when pulling over to park. For turns: Use second gear, signal three seconds in advance, and try to keep second gear engaged for no more than 20 seconds. For U-turns: Shift to the opposite fast lane, accelerate, and shift to third gear. When pulling over to park: Do not release the clutch, shift to first gear.
12
4
Share

Can You Drive in Second Gear During Subject Three?

You can drive in second gear during Subject Three. Here are the specific details: 1. Reason: There are two segments of straight-line driving. One segment occurs after completing the gear shifting (acceleration and deceleration), during which you must drive in third gear. Except for gear shifting and turning, you must use third gear in all other situations. This is because the total distance driven in first and second gears combined during Subject Three cannot exceed 500 meters. Specifically, you cannot drive continuously in first gear for more than 100 meters or in second gear for more than 200 meters. Therefore, third gear is necessary, maintaining a speed of around 35 km/h. However, during straight-line driving, you must accelerate to 50 km/h for at least two seconds. After completing the gear shifting segment, there are no special requirements for the subsequent straight-line driving segment. 2. Subject Three Test Content: Preparation before starting, simulated lighting test, starting, straight-line driving, gear shifting operation, lane changing, pulling over, driving straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving.
4
2
Share

Can I use second gear for a long time in Subject 3?

You cannot use second gear for a long time in Subject 3. Here are the details: 1. Reason: It is not allowed to stay in second gear continuously. After starting in first gear, there will be a prompt indicating 'Start completed'. Once the start is completed, you should immediately shift to second gear. After adding some throttle in second gear and reaching 20 km/h, shift to third gear immediately. Except when making a U-turn where shifting to second gear is necessary, you should shift back to third gear immediately after entering the straight lane. Maintain third gear throughout the drive with a speed between 20-30 km/h. If you drive in second gear continuously, it will be judged as prolonged low-speed driving and considered unqualified. 2. U-turn technique: Before making a U-turn, turn on the left signal, decelerate (to about 5 km/h) or even stop, observe the road conditions carefully, and pay close attention to oncoming traffic (especially vehicles that are farther away but moving fast). Stop and wait if necessary.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.