···
Log in / Register

What are the solutions for ix25 sunroof rattling?

3 Answers
DeCorey
07/25/25 3:22am
ix25 sunroof rattling can be categorized into three scenarios. Below are the relevant descriptions: 1. If the rattling is caused by debris in the sunroof track, cleaning out the debris can resolve the issue. 2. If the rattling is due to loose interior panels in the sunroof, inserting non-woven fabric can help. 3. If the rattling results from insufficient lubrication in the track, applying grease to both sides of the track can solve the problem. Below are some maintenance recommendations for car sunroofs: 1. During car washing, avoid directing high-pressure water jets at the sealing strip. This can not only deform the strip under pressure, leading to water leakage inside the car, but also significantly damage the strip. 2. On extremely bumpy roads, it’s best not to fully open the sunroof, as excessive vibration between the sunroof and track may cause component deformation or even damage the motor. Additionally, never open the sunroof during rain or car washing. 3. The primary concern with sunroof use is water leakage. Proper usage and maintenance can effectively prevent this. Before the rainy season, besides cleaning dust from the track and sealing strip gaps, spray a small amount of plastic protectant or talcum powder on the sealing strip and other components.
Was this review help?
2
0
Share
VanAyla
08/11/25 12:01pm
My ix25 makes a squeaking noise when opening the sunroof, especially noticeable on uneven roads. I've dealt with similar issues before: first, I check if the sliding tracks are clogged with dust or small stones, clean them thoroughly with a toothbrush, and then apply specialized silicone grease lubricant to reduce friction. If the noise occurs during opening or closing, it might be due to loose screws in the sunroof frame, so I gently tighten them. Sometimes, aging seals can also cause noise, and replacing them usually solves the problem. When working on it, I refer to the owner's manual to avoid mistakes. If the issue persists, I immediately take it to the 4S shop for inspection to prevent compromising driving safety. Regular lubrication of the tracks helps prevent such problems; I clean and lubricate them monthly, which has significantly reduced occurrences.
Was this review help?
12
4
Share
Expand All
SanAiden
09/27/25 3:17am
To deal with the sunroof noise issue, I suggest starting with the simplest approach: clean the track dust and avoid using regular oil. Instead, apply automotive-specific silicone grease for lubrication. If the noise occurs during sunroof movement or on bumpy roads, it might be caused by loose screws or insufficient lubrication on the sliding rails. A clicking sound during operation could indicate motor or gear wear. If attempting DIY repairs, be careful not to apply excessive force that could damage the frame—I recommend beginners refer to video tutorials for practice. If the issue persists, promptly visit a professional repair shop for inspection, as safety is paramount. Additionally, gently closing the sunroof during daily use can extend its lifespan and prevent future problems.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

What to Do When Wiper Blades Don't Clean Properly?

Here are the reasons why wiper blades don't clean properly: 1. Dirty windshield: Inadequate cleaning of the windshield during regular car washes can leave sticky particles on the glass, preventing the wiper from cleaning effectively and potentially damaging it. The solution is to visit a car wash for a thorough windshield cleaning. 2. Hardened wiper blades: Aging wiper blades can harden. You can replace them with new ones or clean the wiper with a lubricant. 3. Misaligned wiper arm: Adjust the angle of the wiper arm. Use an adjustment wrench to hold the wiper and gently rotate it to align it properly, or seek professional help at a repair shop. 4. Frozen wiper blades: Wiper blades, usually made of rubber, can freeze and harden in cold winter temperatures. After starting the car, direct some warm air to the windshield to raise its temperature slightly before using the wipers.
20
3
Share

How to Deal with Frost on Cars in Winter?

Here are the methods to handle frost on cars in winter: 1. Turn on the car's air conditioning and set it to external circulation or direct the vents toward the windows. 2. Use a specialized plastic scraper for removing frost and snow from vehicles, gently scraping the frost off the glass in one direction. A bank card can also serve as a substitute, but be careful to avoid scratching the glass. 3. Apply a specialized vehicle defroster spray onto the frosted windows. Vehicle defroster sprays are high-speed anti-ice concentrated solutions designed to thaw frozen windows and wipers without damaging the car's surface, and they help prevent re-freezing. 4. Use a dedicated frost cover to shield the car. 5. Open the car doors to ventilate and equalize the temperature inside and outside the vehicle.
13
0
Share

How to Turn On the Rear Window Wiper?

The method to turn on the rear window wiper mainly includes: 1. Adjust the wiper switch forward and backward to switch between front and rear wipers, and adjust up and down to change the wiper speed. 2. Push the wiper switch one notch toward the driver to adjust the front windshield wiper, and push another notch to activate the front windshield cleaning function. 3. Push the switch one notch toward the front of the car to adjust the rear glass wiper, and adjust the wiper speed by moving it up and down after pushing the notch. Additional note: It is recommended not to use the rear window wiper frequently because the rear window is more prone to accumulating dust and dirt, and it does not have a cleaning function. Using it on non-rainy days may cause scratches on the glass.
15
1
Share

How to reset the maintenance light on the Jetour X90?

Here are the steps to reset the maintenance light on the Jetour X90: 1. Turn off the ignition switch and hold down the mode switch. 2. Turn on the ignition switch and then release the mode switch. 3. Within 30 seconds, simultaneously press the mode switch and the clock switch (press time < 2s), and the maintenance light will be reset. Here are the reasons why the engine maintenance light may illuminate on the Jetour X90: 1. Carbon deposits in the intake tract or on the piston top can cause poor atomization, leading to incomplete combustion and triggering the pollution light. 2. Faults in the sensor or the computer board itself can cause the pollution light to illuminate.
14
2
Share

What are the power specifications of the Lynk & Co 03+?

The Lynk & Co 03+ is equipped with a 2.0T turbocharged engine. The 03+ features a high-power version of the 2.0T turbocharged engine, which delivers a maximum power output of 187kW. As the first high-performance model launched by Lynk & Co, the 03+ boasts a maximum torque of 350Nm, paired with an 8-speed automatic transmission that matches the engine perfectly. Additional Information: While pursuing speed and handling, the Lynk & Co 03+ also provides enhanced safety protection. It comes with globally leading active and passive safety systems and utilizes BorgWarner's fifth-generation intelligent sports all-wheel-drive system to ensure vehicle stability.
1
0
Share

Which Lights to Use in Heavy Fog?

In heavy fog, you should turn on the fog lights. If visibility is extremely low, you should also activate the hazard warning flashers. Driving in foggy conditions significantly reduces visibility and limits the driver's line of sight. Fog lights have strong light penetration, which can enhance visibility for both the driver and other road users, allowing approaching vehicles and pedestrians to spot each other from a greater distance. Fog lights are divided into front fog lights and rear fog lights. Front fog lights are typically a bright yellow color, while rear fog lights are red. The symbol for front fog lights features downward light beams, whereas the rear fog light symbol shows parallel beams. In foggy weather, both front and rear fog lights are usually used together. Fog lights are highly bright and penetrating, and they do not cause diffuse reflection due to fog. Therefore, using them correctly can effectively prevent accidents.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.