What are the solutions for electronic parking brake malfunctions?
2 Answers
When the electronic parking brake system malfunctions, it is necessary to go to a repair shop to read the fault codes with a decoder, and then carry out repairs based on the fault codes to resolve the issue. Here is some information about the electronic parking brake: 1. The electronic parking function is developed from the ESP module. During the parking process, the ECU uses sensors installed on the vehicle to determine the levelness of the vehicle body and the torque required for wheel braking, deciding whether to apply the brake to prevent the vehicle from rolling. 2. With the electronic parking brake, the braking force applied to the wheels is not very strong, just enough to prevent the wheels from moving, so that when the accelerator is pressed again to move forward, the vehicle does not lurch forward.
As an experienced driver, I've encountered electronic parking brake issues several times, and the most common problem seems to be false alarms caused by insufficient battery power. My troubleshooting steps are: first check the vehicle battery voltage with a multimeter to see if it's below 12 volts; if the voltage is normal, try resetting the system by holding the EPB button for a few seconds to reinitialize it; if that doesn't work, the sensor or wiring harness connector might be dusty, so I'll clean it or use a cotton swab to wipe the sensor area; in emergencies, the manual has a manual release method, but this should be done carefully to prevent accidental rolling. It's best to go to a professional shop to scan for fault codes, as internal circuit issues like control unit damage require replacement parts for repair. Usually, I pay attention to maintaining battery health and avoid long-term parking that drains the battery, which can prevent many faults. After all, electronic parking brake failure affects safety, and delaying repairs isn't cost-effective.
