What are the solutions for a dead small battery in the Chery EQ?

1 Answers
LaLuke
07/29/25 11:31am
The solutions for a dead small battery in the Chery EQ are: 1. Remove the battery and send it to a repair shop for charging; 2. Use jumper cables from another vehicle to jump-start the car. Taking the 2017 Chery EQ as an example, it belongs to the microcar category, with body dimensions of: length 3564mm, width 1620mm, height 1527mm, and a wheelbase of 2340mm, with a curb weight of 1128kg. The 2017 Chery EQ features a MacPherson strut front suspension and a longitudinal trailing arm non-independent rear suspension. It is equipped with a permanent magnet electric motor, delivering a maximum power of 41.8kw and a maximum torque of 150nm, paired with a 1-speed fixed gear ratio transmission.
Was this review help?
19
5
Share
More Forum Discussions

How to Set the Lock Car Horn Sound for Tayron?

First, sit in the car, press the brake, and shift the gear to the P position; release the brake, close the door, and press the one-touch start button twice to activate the vehicle system. Press and hold the lock button on the driver's door for 6 seconds; when you hear the car horn sound twice, the lock car horn function for Tayron is successfully set.
7
1
Share

Where is the ID.4 produced?

Volkswagen's all-electric SUV ID.4 will be mass-produced at the Zwickau plant in Germany and the Anting area in Shanghai. Vehicles produced at this plant will be supplied to Europe and North America. In addition, the Volkswagen ID.4 will also be domestically produced by FAW-Volkswagen and SAIC Volkswagen. The ID.4 is Volkswagen's new all-electric SUV model. Currently, there are two models of ID.4 available: the ID.4 CROZZ and the ID.4 X. ID.4 CROZZ: Overall dimensions 4592mm*1852mm*1629mm, maximum range of 425KM, maximum power of 125kW, maximum torque of 310Nm, motor maximum horsepower of 170Ps, wheelbase of 2765mm, trunk volume of 512L, curb weight of 1945kg, front suspension using MacPherson independent suspension, rear suspension using multi-link independent suspension, a compact SUV model. ID.4 X: Overall dimensions 4612mm*1852mm*1640mm, maximum range of 425KM, maximum power of 125kW, maximum torque of 310Nm, motor maximum horsepower of 170Ps, wheelbase of 2765mm, trunk volume of 484L-1546L, curb weight of 1960kg, front suspension using MacPherson independent suspension, rear suspension using multi-link independent suspension, a compact SUV model.
10
0
Share

How to use G72 for facing operation?

This command is a rough turning cycle for facing operations. The tool path of G72 is positioned along the Z-axis, with the X-value used for turning. W represents the depth of cut per pass along the Z-axis. It indicates the cutting depth from the cycle starting point to the endpoint for each pass. R is the retract amount, which is the distance the tool retracts after each cutting pass. P denotes the starting block number of the cycle, which is the program where the contour begins.
3
4
Share

What to Do When Your Car Breaks Down at Night and Needs to Stop?

When driving at night, visibility is affected by the darkness. If your car breaks down and needs to stop, ensure the safety of yourself and others on the road. Try to park in a safe area, turn on the hazard warning lights, side marker lights, and rear position lights, and set up a warning sign behind the vehicle.
16
2
Share

How to undergo inspection for 11 points deducted from a B2 license?

Before the annual inspection, you must participate in no less than three hours of study on road traffic safety laws and regulations, civilized driving practices, emergency handling, and other related knowledge. You must also receive case-based warning education on traffic accidents to pass the driver's license inspection. Factors such as road traffic safety violations, traffic accident handling status, and physical condition will be reviewed. If violations or traffic accidents remain unresolved, physical conditions do not meet driving license requirements, or mandatory education and exams are not completed as required, the inspection will not be approved.
19
4
Share

How to Adjust the A6L Audio System for Optimal Sound Quality?

Access the 'Sound' option from the MMI main menu. Under this level, there are four sub-menus, with the latter ones being relatively easier to understand. Select DSP, the first option is the DSP menu exclusive to BOSE audio systems. The first setting in DSP is sound field positioning. It can be set to 'All' or 'Front', depending on the number of passengers in the car. If only the front seats are occupied, select 'Front'; if the car is full, choose 'All'. Through the combination of 5.1-channel speaker outputs, different sound field positioning effects are simulated.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.