What are the solutions for a car that won't start or ignite?

1 Answers
MacRuth
07/24/25 9:56pm
Solutions for a car that won't start or ignite include checking the battery, inspecting the spark plugs, diagnosing ignition system failures, and assessing severe starter motor aging, then repairing the identified issues. Detailed solutions are as follows: If the vehicle's battery is dead or damaged, has reached the end of its lifespan, or has been damaged due to prolonged inactivity; battery depletion may also occur if the car's ignition is turned on without starting the vehicle, headlights are left on for extended periods, or high-power audio and other energy-intensive entertainment systems are used continuously. Solution: Replace the car battery. Excessive carbon buildup in the vehicle's engine can also cause difficulty in ignition, possibly related to fuel quality or poor sealing of the intake valves. Solution: Clean the internal carbon deposits from the engine. Ignition system failure can be caused by poor connections in the low-voltage circuit or leakage in the high-voltage wires. Solution: Diagnose low-voltage circuit faults by using an ammeter or voltmeter to check each wire and eliminate the fault point for repair; high-voltage circuit faults are often diagnosed using a high-voltage spark test method, where the distributor's central high-voltage wire or a cylinder's high-voltage wire is disconnected and placed 36mm away from the engine block, then starting the engine to test for sparks. Proceed with repairs. Severe aging of the starter motor, often due to the car's prolonged usage, leads to weakened starting power and failure to ignite. Solution: Repair or replace the starter motor. In extremely cold winter temperatures, the viscosity of the car's engine oil changes, causing the engine to turn over too slowly to start. Solution: Replace the engine oil. If the vehicle is out of fuel or the fuel pump is damaged, it may fail to start. Solution: Refuel or repair the fuel pump.
Was this review help?
3
4
Share
More Forum Discussions

How to Use Automatic Headlights?

Automatic headlight usage method: Simply turn the light control knob to the auto position. Automatic headlights, also known as auto-sensing headlights, are equipped with a photosensitive control system for the front lights. The central intelligent control box determines the change in light brightness through the light sensor, thereby controlling the automatic switching on or off of the headlights. Automatic headlights only function when the light control is set to the auto position. The main purpose of headlights is to illuminate the road ahead and to alert pedestrians or other vehicles to the presence and position of your vehicle. Therefore, automatic headlights can activate when ambient light is insufficient, ensuring driving safety.
6
4
Share

How to Replace the Rear Wiper of the Encore?

Method for replacing the rear wiper of the Encore: Lift the wiper arm away from the windshield, keep it steady in a position perpendicular to the windshield, press the tab, and remove the old wiper blade, separating it from the wiper arm. Insert the new wiper, gently rotate the new blade until the hook snaps into place, then return the wiper to the windshield. The Encore is a model under Shanghai General Motors, with body dimensions of 4295mm in length, 1798mm in width, and 1616mm in height, and a wheelbase of 2570mm. In terms of appearance, the Encore has become significantly more youthful and stylish compared to the current model, with the addition of a two-tone roof, exclusive styling packages, and optional wheel embellishments enhancing the vehicle's overall vibrancy.
20
1
Share

How to Clean Cement Splashed on the Car?

Methods for cleaning cement splashed on the car: Cement is somewhat corrosive and can damage the car's paint, so it should be dealt with promptly. If the cement has not yet hardened, you can wet it with clean water, rinse it off, and then use a towel with cleaning solution to wash it away. If the cement has already solidified and hardened, white vinegar can be used for cleaning. White vinegar is an acidic liquid that can effectively dissolve cement. Pour white vinegar onto the cement attached to the car, wait a few minutes for the cement to soften, and then it will be much easier to clean. Generally, multiple cleanings are required to thoroughly remove the cement. During the cleaning process, be meticulous and patient, avoiding any rough scrubbing or scraping to prevent damage to the car's paint.
1
2
Share

What engine does the Fengon 580 have?

Fengon 580 offers two engine options: 1.8L and 1.5T, paired with 5-speed manual, 6-speed manual, and CVT transmissions respectively. The 1.5T engine, coded SFG15TA, adopts technology from Fiat, delivering a maximum power of 150 horsepower and peak torque of 220 N·m. Positioned as a mid-size SUV, the Fengon 580 measures 4700mm in length, 1845mm in width, and 1715mm in height. In terms of exterior design, the Fengon 580 features sleek and abundant side body lines with a three-dimensional silhouette. Its stylish and streamlined design stands out, highlighted by a three-slat chrome grille integrated with upward-sweeping headlights on both sides. The headlight configuration includes popular LED daytime running lights and incorporates projector lenses, presenting a unique sense of fashion.
1
5
Share

How to Deal with Foggy Windshield?

Press the defogging button, turn on the air conditioning (A/C) switch, set the temperature to the lowest, and turn on the external circulation to defog. Foggy car windows can be cleared by using either cold or warm air, but warm air is slower than cold air. The most effective method is to use cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving the purpose of defogging. The method of using warm air to defog is the same as using cold air, but it should be noted that warm air should not be used for defogging on rainy days, as it will initially increase the fog. When the car windows fog up, turn on the external circulation. The reasons for foggy car windows: There is a certain temperature difference between the inside and outside of the car. If the temperatures inside and outside the car are different, the surface of the side with the lower temperature will have a lower saturated vapor pressure than the surrounding environment, causing water vapor to gather on the glass surface and form tiny water droplets, resulting in fog. Methods to defog car windows: Air Conditioning Cooling: Use the air conditioning's cooling and dehumidifying function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car and the air conditioning is not turned on in time, the humidity of the exhaled air is high, and the windshield will quickly fog up. At this time, turn on the air conditioning to blow cold air onto the windshield, using the dehumidifying function of the air conditioning to quickly remove the fog on the windshield. However, if the humidity is too high and the air conditioning is not effective enough, you can slightly open the window to quickly reduce the humidity inside the car. Of course, it can also be used in combination with the air conditioning for faster results. Air Conditioning Warm Air: Use the method of reducing the temperature difference to remove fog. In winter, use warm air to blow hot air onto the glass, quickly raising the temperature of the front glass and reducing the temperature difference between the inside and outside surfaces of the window glass, which can prevent excessive fogging of the front windshield in time. However, it should be noted that the temperature of the rear and side windows rises slowly, so it takes longer to remove all the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification; the temperature control of the air conditioning should not be set to the coldest position, otherwise, the outer surface of the windshield may fog up after prolonged use. Spraying Anti-Fog Agents for Prevention: Spray a small amount of anti-fog agent on the car windows and wipe it clean to remove dirt and stains from the windows. While polishing the glass, a thin transparent protective film is formed on the glass, which effectively prevents the condensation of water vapor on the glass and the formation of fog, especially suitable for cold winters. Alternatives to anti-fog agents include dishwashing liquid, soapy water, glycerin, alcohol, or saline solution. After drying, use chamois or a soft dry cloth to wipe off excess fibers, which can ensure that the car windows do not fog up for several days. Opening Windows for Convection: If the fog inside the car is not heavy, you can open the windows on both sides to create convection between the inside and outside air, reducing the temperature difference, and the fog will slowly disappear. The principle of this method is the same as using cold air from the air conditioning. The drawback of opening windows for convection is very obvious: it cannot be used in rainy or snowy weather, on highways, or when the fog is heavy. Rear Windshield Heating: Most cars basically have a rear windshield electric heating function, although the button positions may vary, the functions are the same. Turn on the windshield heating switch, and the fog on the rear windshield will disappear in about a minute.
18
3
Share

Can Dash Cams Record Clearly at Night?

Dash cams can record clearly at night. Many dash cams now come with night vision capabilities, allowing them to capture clear footage even in low-light conditions. It is recommended to purchase and use well-known brands with effective night recording features. Additionally, adjusting the exposure settings of the dash cam can help capture more details in high-contrast environments. Dash cams record the driving process, and in the event of an accident or dispute, the recorded video can serve as authentic and authoritative evidence. The basic components of a dash cam include: 1. Main unit; 2. Speed sensor; 3. Data analysis software; 4. Infrared camera.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.