What are the small cars of Volkswagen?

Can the ticket vending machine for buses be used without an ID card?

No, a valid ID card is required to collect tickets. Before boarding, the passenger station operator must verify the consistency between the identity information recorded on the ticket and the passenger's original valid ID document (hereinafter referred to as ticket, person, and document) and record the relevant information. Passengers who refuse to provide their original valid ID document or whose ticket, person, and document information do not match will not be allowed to board. Additional Notes: Note 1: For passenger routes and stations implementing real-name management, passengers must also hold their original valid ID document and cooperate with staff inspections. Before boarding, the passenger station operator must verify the consistency between the identity information recorded on the ticket and the passenger's original valid ID document (hereinafter referred to as ticket, person, and document) and record the relevant information. Note 2: Passengers who refuse to cooperate with luggage security checks or insist on carrying prohibited items, or who refuse to provide their original valid ID document or whose ticket, person, and document information do not match for real-name managed passenger routes, will not be allowed to board by the bus operator or passenger station operator.

13

2

Share

What Happens If a Car Is Left Outside Exposed to Sun and Rain for a Long Time?

If a car is left outdoors exposed to sun and rain, its lifespan will be reduced, and the battery will drain, making the car unable to start. Below are the issues that may arise from long-term outdoor parking: 1. Engine oil oxidation and deterioration: Generally, the engine oil in a new car has a shelf life of about one year inside the engine. Due to contamination in the engine oil, prolonged inactivity can accelerate oxidation and deterioration, especially if moisture like water vapor enters, which can quickly emulsify the oil. 2. Brake system corrosion: The brake system is most susceptible to chemical reactions with water vapor and oxygen in the air when left idle for extended periods, leading to corrosion that affects braking performance. Severe corrosion may even cause direct damage to the brake system.

16

4

Share

What Causes the Jerking Sensation When Braking?

Experiencing a jerking sensation when braking may be due to the engine speed and clutch plate speed being out of sync; foreign objects on the brake disc, which reduce braking efficiency; or issues with the vehicle's tires, necessitating a four-wheel alignment. Below are detailed explanations: 1. Braking System: The jerking sensation during braking typically originates from the vehicle's braking system. Modern vehicles often utilize power-assisted braking systems, which rely on brake fluid. However, brake fluid is highly hygroscopic. Therefore, it's essential for vehicle owners to monitor the condition of the brake fluid, especially after driving in rainy or snowy conditions. 2. Foreign Objects on Brake Discs: Another factor to check is the presence of foreign objects on the brake discs. If any are found, they should be removed immediately, as they can not only cause jerking during braking but also significantly compromise the vehicle's safety.

2

0

Share

What Causes an Air Conditioning System to Hold Pressure but Leak Refrigerant?

Most likely, it is due to damage at the refrigerant charging port. 1. Detection Method: After charging the AC system with refrigerant, remove the charging hose and spray soapy water onto the refrigerant port of the AC lines to check for bubbles. 2. Solution: Replace the valve core of the AC charging port (specific structure can be referenced to a standard bicycle Schrader valve). Additional relevant information is as follows: Notes: Based on the owner's description of the refrigerant leaking out within a month, it can be inferred that the leak point is likely very small. Due to the complexity of the AC line locations in vehicles, disassembly for inspection can be challenging. It is recommended to use "fluorescent leak stop and detection agents." This substance can be added to the refrigerant line; if the leak is small, it may temporarily seal the leak. If the leak persists, the fluorescent dye contained in the agent will clearly indicate the leak point under UV light, facilitating subsequent repair work.

15

5

Share

Why was I ticketed when I didn't park on the blind path?

It is possible that you violated traffic regulations without realizing it. If you have any objections, you can provide feedback to the traffic police department. The following information expands on this: 1. Parking on the blind path: According to Article 56 of the Road Traffic Safety Law, motor vehicles should be parked in designated areas. Parking motor vehicles on sidewalks is prohibited, and temporary parking on roads should not obstruct the passage of other vehicles and pedestrians. Therefore, motor vehicles occupying the blind path will be penalized for illegal parking. 2. For violations of road traffic safety laws: Traffic police can point out the illegal behavior, issue a verbal warning, and order the driver to leave immediately. If the driver is not present or refuses to leave immediately, obstructing the passage of other vehicles or pedestrians, a fine will be imposed, and the motor vehicle may be towed to a location that does not obstruct traffic or to a parking area designated by the traffic management department of the public security organ.

12

3

Share

How to Turn Off ESP in a 2012 Ford Focus?

ESP refers to the Electronic Stability Control system. The method to turn off the Electronic Stability Control system is as follows: 1. On the trip computer interface, click the right arrow to access the settings menu. Press the OK button to find the Driving Assistance option. 2. Press the OK button again to view Hill Start Assist and Electronic Slip Regulation functions, then select to turn it off. The Electronic Stability Control system in the new Ford Focus automatically activates every time the ignition is turned on. More details about ESP are as follows: 1. ESP provides stability support when the vehicle skids or deviates from the intended path. It achieves this by applying brakes to individual wheels and reducing engine torque when necessary. If wheels slip during acceleration, the system also enhances traction control by reducing engine torque. This improves the vehicle's driving capability on slippery or loose surfaces and enhances comfort by controlling wheel rotation during sharp turns. 2. ESP stands for Electronic Stability Program, which includes ABS (Anti-lock Braking System) and ASR (Acceleration Slip Regulation), extending the functionality of these two systems. Therefore, ESP is considered the most advanced form of automotive anti-skid device currently available. 3. The ESP system consists of a control unit and various sensors: steering angle sensor (monitors the steering wheel's angle), wheel speed sensors (monitor the speed of each wheel), yaw rate sensor (monitors the vehicle's rotation around the vertical axis), and lateral acceleration sensor (monitors centrifugal force during turns). The control unit uses signals from these sensors to determine the vehicle's operating state and then issues control commands accordingly.

13

2

Share

What are the small cars of Volkswagen?

Can the ticket vending machine for buses be used without an ID card?

What Happens If a Car Is Left Outside Exposed to Sun and Rain for a Long Time?

What Causes the Jerking Sensation When Braking?

What Causes an Air Conditioning System to Hold Pressure but Leak Refrigerant?

Why was I ticketed when I didn't park on the blind path?

How to Turn Off ESP in a 2012 Ford Focus?

What Causes the Sound of Water Sloshing Inside the Car Door?

What are the reasons for clutch not disengaging?

Why does the Volkswagen car's fan keep running after turning off the engine?

How Long Does It Take for Tires to Be Affected by Soaking in Water?