What are the skills for parallel parking in A2 Subject 2?

1 Answers
StMorgan
07/28/25 8:51pm
Parallel parking skills are as follows: Start the car in low gear, and turn the steering wheel to the right when the driver aligns with the third reference point. When the car moves to the position where the front of the car is between the third and fourth reference points, quickly turn the steering wheel to the left to steer the car toward the left side of the road. When the front of the car approaches the left edge of the road, quickly turn the steering wheel back and stop immediately. Shift the car into reverse gear and back up. When the rear of the car approaches the right edge of the parking space (garage), quickly turn the steering wheel to the left to the maximum position. When both sides of the car are parallel to the edges of the parking space (garage), quickly straighten the steering wheel and stop. Precautions: Maintain an upright sitting posture, as this is crucial for accurately judging the reference points; when entering the parking area, park as close to the right side of the road as possible, but do not cross the yellow right edge line to avoid backing too far and crossing the line. The full score for Subject 2 is 100 points, with evaluation criteria set for failure, deductions of 20 points, 10 points, and 5 points. The test is passed under the following conditions: ① For applicants of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required.
Was this review help?
6
3
Share
More Forum Discussions

Does Installing a Front Splitter with Drilling Damage the Car?

Properly installing a front splitter does not damage the car. Types of front splitters: Currently, front splitters generally come in two installation methods. One is directly bonding to the lower part of the bumper using high-strength adhesive. The other involves drilling holes in the lower part of the bumper and securing it with screws and nuts. This method is more reliable but is considered a damaging installation. Detailed overview of front splitter installation: Currently, adding side skirts and front splitters is considered illegal modification. Therefore, even if you proactively report to the vehicle management office after modification, they will only require the owner to restore the original condition. Hence, it is not recommended to privately install front splitters and side skirts. Currently, legal modifications mainly include wheels of the same specifications as the original factory, roof racks under 300MM, interiors that do not alter the vehicle's original structure, body color, side steps, grilles, and braking systems.
10
4
Share

How to set up one-touch window control for Trumpchi GA6?

Trumpchi GA6 one-touch window control setup method is: 1. Briefly press the window button to automatically lower it completely; 2. Briefly pull the window button to automatically raise it completely; 3. Long-press the window button during descent and release to stop the window from lowering; 4. Long-pull the window button during ascent and release to stop the window from rising. The Trumpchi GA6 is a mid-size car under the Trumpchi brand, with body dimensions of 4891mm in length, 1850mm in width, and 1505mm in height, and a wheelbase of 2815mm. In terms of power, the Trumpchi GA6 is equipped with a 1.5-liter turbocharged four-cylinder engine, with a maximum power of 124 kilowatts and a maximum torque of 265 Newton-meters.
18
0
Share

How often should the spark plugs be replaced on the Baojun 560?

Baojun 560 spark plugs should be replaced every 20,000 kilometers. Methods to determine whether the spark plugs need replacement include: 1. The lifespan of a resistor spark plug is 20,000 kilometers, while an iridium spark plug should be replaced every 70,000 to 80,000 kilometers; 2. Conduct a short-circuit test on the spark plug with a screwdriver while the engine is idling; 3. Remove the spark plug and check for color changes. The Baojun 560 is the first SUV model officially launched by SAIC-GM-Wuling. Its body dimensions are 4620mm in length, 1820mm in width, and 1750mm in height. In terms of configuration, the Baojun 560 comes standard with ESC (Electronic Stability Control), VDC (Vehicle Dynamic Control), TCS (Traction Control System), HBA (Hydraulic Brake Assist), HHC (Hill Hold Control), front and rear parking sensors, and ISOFIX child seat anchors.
16
4
Share

Where is the air intake of the Accord located?

The air intake of the Accord is located in the engine compartment, specifically at the position of the air filter. Below are the functions of the Accord's air intake: Delivering air: It supplies clean, dry, sufficient, and stable air to the engine to meet its requirements, preventing impurities in the air and large particles of dust from entering the engine combustion chamber, which could cause abnormal wear. Reducing noise: Another important function of the intake system is to reduce noise and control the air intake volume. Noise not only affects the vehicle but also impacts the interior noise level, significantly influencing ride comfort. Enhancing performance: The design quality of the intake system directly affects the engine's power and noise characteristics, which are related to the overall ride comfort of the vehicle. Properly designed muffler components can reduce subsystem noise and improve the vehicle's NVH performance.
12
3
Share

What is the problem with low engine water temperature?

Reasons for low engine water temperature: 1. Louver failure; 2. Cooling fan failure; 3. Water temperature sensor failure; 4. Thermostat failure. Solutions: 1. Check if there is any foreign object blocking the louver; 2. Check if the fan blades are operating normally; 3. Check if the water temperature sensor and circuit are short-circuited or open-circuited; 4. Disassemble and inspect the thermostat, observe its opening in water at different temperatures. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. The engine can be used as a power generation device or refer to the entire machine including the power unit.
15
2
Share

What Causes the Squeaking Noise When a BMW 3 Series Drives on Bumpy Roads?

Most of the time, the squeaking noise when a BMW 3 Series drives on bumpy roads is due to the aging and hardening of the shock absorber top rubber. The area where the vehicle's shock absorber connects to the body has rubber, known as the shock absorber top rubber. This rubber serves to provide cushioning for the body and reduce vibrations. Over time, the rubber can age, and aged rubber becomes hard, leading to noise when driving over uneven surfaces. Additional information is as follows: 1. Antifreeze Usage Tips: It is best to use antifreeze year-round. Besides its anti-freezing and cooling functions, antifreeze also has cleaning, rust-removing, and anti-corrosion properties, reducing corrosion in the radiator and protecting the engine. Be sure to choose the correct color of antifreeze and avoid mixing different types. 2. Brake Fluid Usage Tips: The functionality of the braking system is closely related to the brake fluid. When inspecting or replacing hardware such as brake pads and brake discs, don't forget to check if the brake fluid needs to be topped up or replaced.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.