What are the skills for motorcycle slalom riding?

2 Answers
GideonAnn
07/29/25 3:23am
Motorcycle slalom riding skills are as follows: 1. Choose the middle position: After starting the slalom, find the correct angle and speed to enter the poles, selecting the middle position between the sideline and the marker pole. 2. Maintain semi-clutch: Keep the semi-clutch state, which allows timely cutting off the power output for corresponding adjustments. 3. Smooth and gentle throttle: Apply the throttle smoothly and gently. If the vehicle position does not match your expectations, do not squeeze the brake suddenly. During this process, everything should follow the principle of 'slow'. However, this 'slow' should be well-measured and not exceed your balance-keeping limit. 4. Pay attention to your position and the vehicle's position: During the pole weaving process, when moving from the space between two poles to the next, pay attention to your position and the vehicle's position to avoid hitting the marker poles. Drivers accustomed to first gear can appropriately apply throttle when entering and decelerate when exiting. Drivers using second gear can try to pass through at a constant speed.
Was this review help?
5
5
Share
VonMackenzie
08/12/25 7:14am
I've been riding motorcycles for over 20 years, and slalom skills are quite crucial, especially mastering the body posture. Remember, always look at the next cone—don't stare at the tires or the ground, or you might lose control. Keep your body relaxed, lean the bike slightly, and coordinate with throttle control. Slow down when entering the turn and accelerate a bit when exiting. Don’t grip the handlebars too tightly; use your body to steer the bike. It’s best to practice in an empty parking lot at first—don’t hit the road right away to avoid crashes. Once, I was too hasty practicing slalom in the rain and skidded, but thankfully, I was wearing protective gear and wasn’t seriously hurt. So, wearing safety equipment like helmets and knee guards is essential. Practice a few more times, and once you get the hang of it, the turns will feel smoother. Don’t rush—take it slow and steady.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on the Maxus V90?

Turn off the ignition switch to cut off the car's power supply, and pull up the handbrake to prevent the car from rolling and causing unnecessary danger. While turning on the ignition switch, press and hold the odometer hour reset button, and the prompt message will be displayed simultaneously. Within 30 seconds, press and hold the odometer hour reset button for about 3 seconds, and the prompt message will be completely cleared, indicating that the maintenance light has been reset. Send the vehicle to the 4S shop for maintenance in time. After the maintenance is completed, the relevant staff will reset the maintenance mileage.
12
5
Share

What is the ground clearance of the Touareg?

The ground clearance of the Touareg is 160mm for the two-wheel-drive version and 180mm for the four-wheel-drive version, with an actual measured ground clearance of 193mm. The ground clearance can be adjusted via the air suspension, which can lower the chassis. The ground clearance of a vehicle is professionally referred to as the minimum ground clearance. Relevant information about the minimum ground clearance is as follows: 1. The minimum ground clearance refers to the distance between the lowest point of the chassis and the ground when the car is fully loaded (allowing maximum load capacity). 2. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but the higher center of gravity reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower center of gravity increases stability.
3
3
Share

Why Do Tires Turn Red?

There are many reasons for the reddening. It is recommended to have it checked at a 4S shop. Below is a detailed introduction to the functions of car tires: 1. Enabling driving and other operations: Tires are the medium for transmitting forces between the vehicle and the road surface. They transmit driving force, braking force, steering force, etc., thereby enabling the car's driving, braking, steering, and other operations. 2. Supporting vehicle load: The vehicle's load causes the tire to sink until the average pressure on the tire's contact area balances with the internal inflation pressure. 3. Reducing and absorbing vibrations and impacts during driving: This prevents early damage to car components caused by severe vibrations. At the same time, it adapts to the vehicle's high-speed driving state, reduces driving noise, and ensures driving safety, comfort, handling stability, and fuel economy.
16
0
Share

What is the displacement of a car?

Car displacement refers to the size of the engine, usually measured in terms of displacement or exhaust volume. Displacement refers to the volume of fluid inhaled or discharged per stroke or cycle. Car displacement is an important structural parameter for measuring a car, and it represents the size of the engine more accurately than bore diameter and the number of cylinders. Many indicators of the engine are closely related to the exhaust volume. The classification of cars is based on the displacement size: cars with a displacement of 1.0L or less are classified as micro cars; those with a displacement between 1.0L and 1.6L are considered compact cars; those with a displacement between 1.6L and 2.5L are mid-size cars; those with a displacement between 2.5L and 4.0L are full-size cars; and luxury cars have a displacement greater than 4.0L.
20
0
Share

Why is it difficult to start a motorcycle in the morning?

There are several reasons why a motorcycle may be difficult to start in the morning: 1. The battery is old and has no power; 2. In winter, the temperature is relatively low and the engine has not fully warmed up; 3. Spark plug failure, caused by prolonged use leading to performance degradation; 4. There is no gasoline in the fuel tank. If your motorcycle is difficult to start in the morning, you can try pressing the motorcycle pedal a few times before starting. This action helps mix the thick engine oil inside through external force, and then you can turn the key to start. Motorcycles are powered by gasoline engines and are two- or three-wheeled vehicles steered by handlebars. They are characterized by being lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also as sports equipment. Motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes.
19
5
Share

How to Sell a Fancy License Plate to Others?

Generally, license plate numbers cannot be transferred with the vehicle during a sale. The new owner can only register for a new license plate at the vehicle management office. The original owner can apply to retain the license plate number after using it for one year. Below is relevant information about license plates: 1. A license plate, commonly known as a vehicle plate, refers to the number plates affixed to the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, or other related information. 2. License plates serve as identifiers and information records for vehicles. Their primary function is to indicate the vehicle's region of registration and allow tracking of the vehicle's owner and registration details based on the plate number.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.