What are the signs of abnormal car tires?

2 Answers
EmmanuelMarie
08/28/25 2:16am
When there is an abnormality in the tire, such as abnormal tire pressure, a warning light will illuminate. The tire pressure warning light resembles an exclamation mark enclosed in parentheses, with a patterned line at the bottom, similar to the tread of a tire. The entire symbol looks like a cross-section of a tire. Relevant information about tire pressure is as follows: 1. Introduction: Tire pressure, strictly speaking, refers to the pressure of the air inside the tire. In car maintenance, the engine is the heart of the car, and damage to the engine will lead to the end of the car's life. Similarly, tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the performance and power of the car. 2. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort.
Was this review help?
16
1
Share
McPreston
09/09/25 7:41am
As a frequent driver, I monitor tire abnormalities through daily observations. First, check tire pressure: if a tire appears slightly deflated and feels soft to the touch, it may indicate insufficient pressure, leading to instability at high speeds. Second, inspect the exterior: discovering cracks or bulges often means internal structural damage, and failure to replace the tire promptly could result in a blowout; uneven wear, such as faster wear on the inner side compared to the outer, suggests suspension issues. Third, watch for foreign objects: small stones lodged in the tread are minor, but a nail puncture can cause rapid air loss, with the tire noticeably flattening after parking. I make it a habit to use a tire pressure gauge monthly to check standard values, keeping them within the manufacturer's recommended range; this ensures not only safety but also better fuel efficiency. Paying attention to unusual noises or vibrations while driving and addressing them early can prevent major troubles.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

How many kilometers do spark plugs need to be replaced?

Replacement cycle of spark plugs: Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be used as a reference for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe them. The condition of the spark plugs can be judged based on their appearance and color. Normal spark plugs have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, an electrode gap between 0.8-0.9mm, and no signs of electrode burn. If the spark plug is contaminated with oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, with oil seeping up.
15
1
Share

How to distinguish imported Honda Free 50?

Domestic models are the cheapest; followed by parallel imported cars; the most expensive are regular imported cars. Parallel imported cars and imported cars have good quality and very complete configurations. Domestic cars, in order to cater to the tastes of domestic consumers and ensure cost, may have some reduced configurations.
19
2
Share

How to adjust the high and low beams of a motorcycle?

Loosen the two screws on the left and right sides of the headlight, then move the headlight up and down. The adjustment can also be made using the adjustment screws behind the headlight. There are usually two screws, one for adjusting the height and the other for adjusting the left-right position.
1
0
Share

How to Disassemble and Repair the Front Brake Pump of a Motorcycle?

Remove the half-shaft bolt, take out the half-shaft, lift the wheel, remove the hollow shaft bolt, and take out the half bearing together with the wheel; Remove the brake pads, disconnect the brake caliper hose, remove the brake pump, and then you can start the repair.
1
4
Share

How to Wire Additional Lights on a Motorcycle?

Take the charging wire (red/black), trigger wire (green/white), high-voltage coil input wire (yellow), or any one of the engine kill wires (black/white) and connect them in series with a switch. Connect in series with the positive battery input wire (red wire).
14
1
Share

How to Install a Chain?

Replace the worn-out old chain and cut the new chain to the same length as the old one. Place the chain on the largest chainring and the largest sprocket. For frames with rear suspension, position the rear suspension at the setting that requires the longest chain length.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.