What Are the Signs of a Damaged Clutch Plate?

What Causes the Car Brake Light to Stay On?

If the brake light remains illuminated, potential faults can be identified as insufficient brake fluid, a faulty brake switch, or worn-out brake pads. Insufficient Brake Fluid: Brake fluid plays a crucial role in the car's braking system. When the driver presses the brake pedal, the force applied is transmitted by the master cylinder piston through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and stop the vehicle. Insufficient brake fluid may also be accompanied by noticeably reduced braking power, and in severe cases, a complete loss of braking force. This issue can be resolved by promptly replenishing the brake fluid. Faulty Brake Switch: This usually occurs when the brake pedal does not properly contact the brake sensor switch or the sensor switch itself is damaged, requiring disassembly for inspection. Worn-out Brake Pads: Worn or aged brake pads can also cause the brake light to stay on. In this case, it is necessary to check the thickness of the brake pads. If the thickness is below the specified value, typically 0.8cm, there is a high risk of the pads cracking during driving, which could be dangerous.

10

3

Share

What Does the Subject 3 Driving Test Include?

Subject 3 driving test includes: preparation before starting, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving. Test precautions: Fingerprint collection: If the examinee's fingerprint verification fails, please exit the vehicle to re-collect fingerprints before queuing up again for the test. Pulling over: If the examinee's score falls below the passing score during the test, the system will automatically prompt the examinee to pull over. After completing the pulling over action, the system will prompt for the next test. Driving distance: After the examinee completes all required test items and the driving distance exceeds 3 kilometers, the system will automatically prompt to pull over.

12

0

Share

Can a second car be registered if the first car has unpaid traffic violations?

New cars cannot be registered or licensed. If the new car is to use the license plate from the old car, the traffic violations must be settled before the new plate can be issued. Otherwise, registration will not be granted. For general traffic violations that do not result in accidents, the process includes: investigation and evidence collection, notification of the penalty details, reasons, legal basis, and relevant rights, listening to statements, defenses, or holding hearings, and making a penalty decision. More relevant information is as follows: Vehicles: refer to motor vehicles and non-motor vehicles. Motor vehicles: refer to wheeled vehicles driven or towed by power devices, used for transporting people or goods on roads, or for specialized engineering operations. Non-motor vehicles: refer to vehicles driven by human or animal power on roads, as well as vehicles with power devices but designed with maximum speed, unladen weight, and dimensions complying with national standards, such as disabled motorized wheelchairs and electric bicycles.

19

0

Share

Will motorcyclists be penalized for using the emergency lane?

Motorcycles are not allowed to use the emergency lane during normal driving and should travel in the outermost lane of the highway. Below is a detailed introduction regarding the emergency lane on highways: 1. The emergency lane is reserved for emergency vehicles. For instance, if a vehicle experiences sudden illness, a flat tire, brake failure, or runs out of fuel, making it impossible to continue driving, it may stop in the emergency lane. Emergency vehicles on duty may pass quickly through the emergency lane. No vehicles are permitted to occupy the emergency lane. If caught by traffic cameras or on-site by traffic police, violators will be penalized according to traffic regulations. 2. Motorcycles must meet the following requirements to drive on highways: (1) The speed of the motorcycle must not be less than 60 km/h and must not exceed 80 km/h. (2) Motorcycles on highways must not carry passengers, and the driver must wear a helmet. (3) According to the speed limits of different lanes on highways, motorcycles should travel in the outermost lane. (4) Except during holidays designated by the State Council for toll-free passage, motorcycles are subject to the toll standards applicable to passenger vehicles with fewer than 7 seats at other times.

13

1

Share

What is the P Gear?

P gear is the parking gear and starting gear. When the vehicle is parked and not in use, the gear is in this position, at which point the wheels are mechanically locked to prevent rolling. The following are introductions to other car gears: 1. R gear: The reverse gear of an automatic transmission car. After shifting into R gear, the car will generate a backward pulling force, which is used for reversing into parking spaces and parallel parking. 2. N gear: The neutral gear of an automatic transmission car. Unlike manual transmission cars, it does not completely disconnect the transmission from the engine, so coasting in N gear is strictly prohibited. It can only be used briefly while waiting at traffic lights. 3. D gear: The drive gear of an automatic transmission car. Simply shift into D gear, accelerate by pressing the gas pedal, and decelerate by pressing the brake to make the vehicle move. 4. S gear: The sport gear of an automatic transmission car. It allows the car to unleash stronger power and acceleration, and is used on highways and in congested road sections. 5. L gear: The low-speed gear of an automatic transmission car, also known as the climbing gear. It reduces the car's speed to ensure the engine delivers powerful force, often used on bumpy roads or when climbing long slopes to provide sufficient power.

4

0

Share

Is the power of the GLB200 sufficient?

glb200 power basically meets the needs. Engine introduction: The Mercedes-Benz GLB200 is equipped with a small-displacement 1.3T turbocharged engine, with a horsepower of 163, which is quite impressive. The maximum power speed is 5500rpm, the maximum torque is 250 Nm, the maximum power speed is 1620-4000rpm, and it uses a 7-speed dual-clutch transmission. Power performance: The power of the 1.3T engine in the Mercedes-Benz GLB200 is not particularly abundant, but it is sufficient for daily driving and acceleration. Considering the engine's displacement, it is completely acceptable. The transmission performs diligently, with accurate timing for shifting gears. In most cases, the smoothness is no different from an AT transmission.

12

0

Share

What Are the Signs of a Damaged Clutch Plate?

What Causes the Car Brake Light to Stay On?

What Does the Subject 3 Driving Test Include?

Can a second car be registered if the first car has unpaid traffic violations?

Will motorcyclists be penalized for using the emergency lane?

What is the P Gear?

Is the power of the GLB200 sufficient?

What brand is Comfort tire?

At what mileage should a car be scrapped?

What to Do If the Car Paint Gets Scratched?

What size tire is equivalent to 275/80r22.5?