What are the signs indicating it's time to replace car tires?

Will traffic violations with temporary license plates be photographed and fined?

Temporary license plate violations will result in points deduction and fines. Introduction to temporary license plates: Temporary license plates refer to paper motor vehicle license plates that allow temporary road use of motor vehicles, mainly issued by public security vehicle management departments for newly purchased vehicles before formal registration. There are four types: temporary license plates for administrative jurisdictions, temporary license plates for cross-administrative jurisdictions, temporary license plates for testing purposes, and temporary license plates for special-type motor vehicles. Regulations related to temporary license plates: New cars using temporary license plates must not exceed 15 days, and owners should promptly apply to the vehicle management authority for formal license plates. After expiration, they may face penalties such as vehicle impoundment, fines, and points deduction.

6

4

Share

What are the hazards of parking in neutral with the handbrake engaged?

Parking a car in neutral with the handbrake engaged is possible and generally does not cause harm to the vehicle. However, this practice is not recommended, especially on inclined roads. Below is relevant information about the handbrake: Handbrake Principle: The handbrake, technically known as an auxiliary brake, operates differently from the main braking system. It uses a steel cable connected to the rear brake shoes to apply braking force. Prolonged use of the handbrake can lead to plastic deformation of the steel cable. Since this deformation is irreversible, it reduces effectiveness over time and increases the handbrake's travel distance. A return spring works in conjunction with the handbrake. When the handbrake is engaged, the spring stretches; when released, it returns to its original length. Long-term use can also cause deformation in the spring. Importance of Proper Use: The handbrake is a frequently used system. Proper and correct usage ensures smoother operation in the future, extends the adjustment cycle, and reduces maintenance and replacement costs.

13

0

Share

Why does the car still roll when in N gear?

If the car still rolls when in N gear, it's because the wrong gear was selected. When parking, you should shift to P gear. N gear is neutral and does not have a parking function, while P gear is the actual parking gear. Below is an introduction to the related gear functions: P gear: Parking lock position. When the gear lever is moved to this position, the drive wheels are mechanically locked. The gear lever can only be moved to this position after the car has come to a complete stop. To move the gear lever out of this position, you must press the brake pedal and turn on the ignition. R gear: Reverse position. Move the gear lever to this position when reversing. The gear lever can only be moved to this position after the car has come to a complete stop. N gear: Neutral position. When the gear lever is moved to this position, the transmission does not engage any gear. After shifting to this position, no power is transmitted to the wheels, and the engine's braking function cannot be utilized.

4

2

Share

Does stepping on the accelerator in P gear have any impact?

Stepping on the accelerator in P gear has no impact on the vehicle. The P gear in an automatic transmission vehicle is the parking gear. In this gear, pressing the accelerator does not transfer power to the transmission system, meaning no substantial damage is involved. It is similar to stepping on the accelerator in neutral, where the engine operates in an idle state. When the vehicle is parked in P gear, the mechanical lock gear teeth secure the transmission output, effectively disengaging the engine from the transmission. There is no power transfer, and revving the engine only increases its RPM without transmitting power to the transmission. Like neutral (N gear), the engine spins freely, and the vehicle does not move. P gear is a special neutral position that mechanically locks the transmission output shaft to immobilize the vehicle. Its primary function is to act as a parking brake, preventing the vehicle from moving. For practical safety reasons, car manufacturers place the P gear in the first position on the gear selector and configure internal mechanisms to ensure the ignition key can only be removed when the gear lever is in P gear. Therefore, P gear is specifically designed for long-term parking in automatic transmission vehicles. Occasionally stepping on the accelerator in P gear will not harm the vehicle, but prolonged operation can cause the engine temperature to rise rapidly. Without cool air intake, the radiator's cooling efficiency significantly decreases, potentially leading to severe issues such as burning the piston's bearings (big and small ends). Additionally, it can negatively affect belts and gears.

13

0

Share

Can You Release the Clutch Immediately After Shifting to Second Gear?

You cannot directly release the clutch after shifting to second gear. After shifting up to second gear, you should gently lift the clutch and slowly apply throttle—do not release the clutch immediately. Releasing the clutch too quickly: After pressing the clutch and completing the gear shift, the car's speed has not yet increased, so the clutch must be released gradually. Releasing the clutch too quickly can cause the engine to stall. You can wait until the clutch is fully released before applying throttle, as coordinating the clutch and throttle requires relatively advanced skill. Proper clutch operation: Only press the clutch pedal when braking at speeds below 20 km/h. Pressing the clutch pedal at higher speeds does not aid braking effectiveness. Of course, during emergency braking, you should simultaneously press both the brake and clutch.

8

2

Share

What Causes Lack of Power When Accelerating After Engaging Gear?

Specific reasons for the lack of power and acceleration when pressing the throttle after engaging gear are as follows: 1. Clutch Slippage: The main cause of clutch slippage is insufficient friction on the clutch friction plate; shifting gears prematurely or disengaging before the clutch is fully engaged; driving for extended periods with the clutch partially engaged or coasting with the clutch depressed; abnormal wear of the clutch disc due to aggressive throttle application when gear engagement or disengagement is incomplete. 2. Engine Issues: The power source comes from fuel combustion, and the engine is responsible for supplying fuel and converting chemical energy into mechanical energy. Therefore, when experiencing weak acceleration or slow speed increase, the engine system should be a key focus for inspection. 3. Engine Oil System: The importance of engine oil is undeniable—it ensures proper lubrication, reduces resonance, and enhances engine smoothness. Prolonged oil deficiency can lead to insufficient power and increased fuel consumption in mild cases, or piston knocking and mechanical damage to related components in severe cases. Additionally, a faulty fuel pump or clogged fuel filter can also cause a drop in engine power. 4. Engine Intake System:

9

2

Share

What are the signs indicating it's time to replace car tires?

Will traffic violations with temporary license plates be photographed and fined?

What are the hazards of parking in neutral with the handbrake engaged?

Why does the car still roll when in N gear?

Does stepping on the accelerator in P gear have any impact?

Can You Release the Clutch Immediately After Shifting to Second Gear?

What Causes Lack of Power When Accelerating After Engaging Gear?

How often should the Volkswagen Lavida's transmission fluid be changed?

What does the 'H' on a tire mean?

What is the parking procedure for an automatic transmission vehicle?

Does using P gear with air conditioning on affect the car?