What are the side effects of transmission reset?

1 Answers
VanAlan
07/29/25 9:31am
There are no side effects to resetting an automatic transmission. Here is some information about automatic transmissions: 1. Introduction: An automatic transmission is a gear-shifting device that can automatically shift gears based on the vehicle's speed and engine RPM, as opposed to a manual transmission. 2. Principle: The transmission reset was originally designed as an emergency troubleshooting method to reset the automatic transmission control computer (TCU) when its program hangs or freezes. Before resetting the transmission, the transmission control unit should be checked to ensure there are no fault codes. If fault codes are present, the transmission memory function cannot be reset.
Was this review help?
12
3
Share
More Forum Discussions

What is the total weight of the Audi A6?

Audi A6 total weight is 1760 kg. The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon body styles. In terms of dimensions, the Audi A6 measures 5012mm in length, 1855mm in width, and 1485mm in height, with a wheelbase of 2945mm. Regarding its exterior design, the previously separated radiator and intake grille on the front bumper of the Audi A6 have been integrated into a single trapezoidal grille. The rear end features slightly raised edges instead of the original smooth streamline, serving as a spoiler to provide sufficient downforce at high speeds, thereby enhancing the vehicle's handling and safety during high-speed driving. This design also gives the rear a more robust and sporty appearance.
20
1
Share

Can a diesel vehicle still be driven when the SVS light is on?

Whether a diesel vehicle can be driven after the SVS light comes on depends on the following two aspects: 1. You can try to start the engine. If it fails to start, it may be due to an abnormal fuel pump that cannot supply fuel to the engine properly. 2. If the engine can still be started, it may be due to other sensor failures. In this case, the vehicle can still be driven. 3. It cannot be ruled out that the fault may affect the normal use of the vehicle, such as increased fuel consumption or body vibration. Here are the solutions for a diesel vehicle that cannot start when the SVS light is on: 1. Check whether other equipment in the vehicle shows abnormalities, such as the water temperature gauge or oil pressure warning light. 2. If only the SVS light is on and the engine can be started, drive cautiously, control the speed, and go to a repair shop for inspection in time.
15
3
Share

Is the first maintenance an oil change?

First maintenance requires an oil change, and the first maintenance oil filter and oil are free maintenance items. Changing the oil allows the engine to work better, along with routine vehicle inspections, such as: tire and brake pad wear, fluid levels in the engine compartment, whether there is any impact on the chassis, and whether the chassis brackets and tie rods are deformed, etc. More relevant information is as follows: 1. Oil function: When a new car is first driven, because the engine is in the break-in period, some impurities will be generated inside the engine. Therefore, during the first maintenance, the oil and oil filter need to be replaced so that the oil can better lubricate the various components inside the engine. 2. Maintenance practices and reasons: During the new car maintenance period, the wheel hub bolts need to be torque-tightened because new car tires generally leave a break-in gap. After the break-in period, they need to be tightened. Debris such as stones in the tire gaps should also be cleaned, otherwise it will affect the tire's drainage and friction.
5
2
Share

What lights to use when driving behind another vehicle at night?

When driving behind another vehicle at night, use low beam headlights. If you need to alert the vehicle in front, you can flash the high beams. Below are specific instructions for using low beams: Meeting oncoming traffic: When meeting or when there is oncoming traffic, turn off the high beams. High beams can blind the drivers of oncoming vehicles, making it difficult for them to see the road ahead and increasing the risk of an accident. If the oncoming vehicle does not turn off its high beams, you can alternately switch between high and low beams to signal them to turn off the high beams. When passing through a dimly lit intersection, alternately switch between high and low beams and honk the horn. Overtaking: When preparing to overtake, first alternately switch between high and low beams and honk the horn to alert the vehicle ahead of your intention to overtake. Then, turn on the left turn signal, check the rearview mirror for any approaching vehicles, and if the coast is clear, change lanes to the left and accelerate to overtake.
19
3
Share

How to Use ETC for Free on Highways?

There are several ways to use ETC for free on highways. Here is a detailed introduction to ETC: 1. Detailed methods: Enter through the ETC lane and exit through the manual lane, you can pass normally without being charged. Enter through the ETC lane and exit through the ETC lane, you will not be charged. Enter through the manual lane and exit through the manual lane, you will not be charged. If you enter through the manual lane and try to exit through the ETC lane, the exit barrier will not lift because the system lacks entry information, so you must choose the manual lane at the exit. 2. Overview of ETC: ETC stands for Electronic Toll Collection, which means an electronic non-stop toll collection system. Generally, vehicles equipped with ETC devices will automatically identify the vehicle, record information, and deduct the corresponding funds from the pre-bound IC card or bank account when passing through toll stations, achieving fast passage. It is particularly suitable for use on highways or in busy bridge and tunnel environments.
5
2
Share

What is the Consumption Tax on Imported Cars?

Consumption tax is determined based on the vehicle's price and engine displacement. Below is a detailed introduction to the consumption tax on imported cars: 1. Detailed calculation method: Consumption tax is determined based on the vehicle's price and engine displacement. The formula for calculating consumption tax is: Consumption Tax = (Declared Customs Value + Customs Duty) ÷ (1 - Consumption Tax Rate) * Consumption Tax Rate. The consumption tax rate ranges from 0% to 40%, divided into 8 tiers, and the consumption tax rate is directly proportional to the engine displacement. 2. Overview of customs duty: Customs duty refers to the tax levied by the customs authorities set up by the government on importers and exporters when goods pass through a country's customs territory. In most countries, customs duty is generally a high-level tax with rates specified by the highest administrative unit. For countries with developed foreign trade, customs duty often constitutes a major source of national tax revenue and even national finance.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.