What are the self-editing rules for selecting license plates on 12123?

1 Answers
StephenLee
07/30/25 6:32am
The self-editing license plate selection on the Traffic Management 12123 platform is an internet-based random method. Each time, 10 license plate numbers are generated, and you can choose the most satisfactory one from these 10 numbers to place in the selection queue. The operation may vary in different regions, with a maximum of 5 attempts. After 5 attempts, you can have up to 5 alternative numbers to confirm. Relevant information about license plates is as follows: 1. Introduction: License plates, commonly known as vehicle plates, refer to the plates attached to the front and rear of a vehicle, displaying the vehicle's registration number, registration region, or other related information. 2. Function: License plates serve as a numbering and information registration system for vehicles. Their primary purpose is to identify the region to which a vehicle belongs and to trace the vehicle's owner and registration details based on the plate number.
Was this review help?
12
0
Share
More Forum Discussions

Why is one brake light on and the other not working?

One brake light being on while the other isn't working is usually caused by a burnt-out filament in the brake light bulb. After prolonged use, the filament can deteriorate due to aging, preventing the brake light from functioning properly. In such cases, the bulb needs to be replaced promptly. If the issue lies with the wiring, professional diagnosis and repair will be required. Steps to replace the brake light switch: 1. Remove the protective panel above the brake and accelerator pedals to access the brake light switch; 2. Disconnect the corresponding wiring harness and remove the switch (note: the brake light switch uses a twist-lock mechanism - turn it counterclockwise to release); 3. Install the new brake light switch and reassemble all components in reverse order.
6
1
Share

How to repair a scratched car?

Repair methods for a scratched car: 1. For minor scratches on the paint surface, which are at the top layer of the clear coat, they can be completely repaired by waxing; 2. Use a polishing compound, applying it in straight lines, then follow up with wax—start with coarse wax, then fine wax, moving in the same direction from the inside out. This method can remove almost all fine scratches; 3. Apply toothpaste gently to shallow scratches, then rub with a soft cloth in a counterclockwise motion. Repeating this several times not only reduces the scratches but also prevents air from corroding the damaged paint. If the scratched area is too large or there is deformation, a full repaint is necessary, and deformation may require panel beating.
12
0
Share

What do 1.6XE and XL mean for the Sylphy?

The Sylphy XE is the Comfort version, while the XL is the Luxury version. Here are the specific details: 1. Both models share the same engine and transmission, with the difference being that the Luxury version offers better safety and convenience features. 2. The new Sylphy is still equipped with a 1.6L naturally aspirated engine, paired with either a 6-speed manual or CVT transmission. Although the engine displacement remains unchanged, the maximum horsepower has been increased to 139 hp, which is more than sufficient for daily use in a compact family sedan. 3. The Sylphy has also seen significant improvements in fuel efficiency, with the CVT version's official fuel consumption rated at 4.9-5L per 100 kilometers.
5
1
Share

What is the emission standard for LV?

LV complies with the China VI emission standard. More details about the China VI emission standard are as follows: 1. The emission limits for China VI are divided into two phases: China VI A: Carbon monoxide 700mg/km, Non-methane hydrocarbons 68mg/km, Nitrogen oxides 60mg/km, PM fine particles 4.5mg/km, etc.; China VI B: Carbon monoxide 500mg/km, Non-methane hydrocarbons 35mg/km, Nitrogen oxides 35mg/km, PM fine particles 3mg/km, etc. 2. After the implementation of the China VI standard, it only affects the registration of new China V vehicles. Already registered and annually inspected China V vehicles can continue to be used without any impact.
3
0
Share

What is the difference between engine oil SN, SP, and SL?

The differences between engine oil SN, SP, and SL are as follows: 1. Different phosphorus content requirements: SN-grade engine oil has particularly high requirements for phosphorus content, even being phosphorus-free; SL-grade engine oil only requires phosphorus content not to exceed 0.1%, with very high demands on phosphorus content. 2. Different quality grades: Engine oil quality grades are classified into SG, SJ, SL, SN, SM, and SP, with SP being the highest grade for gasoline engine oil currently. The higher the grade of the engine oil, the higher its various technical indicators. 3. Different prices: Depending on the quality grade, the higher the quality grade, the higher the market value.
11
0
Share

What is the emission standard for cars in 2011?

Cars manufactured after July 1, 2011 comply with the China IV emission standard. For vehicles produced before July 1, 2011, they could either meet the China IV or China III emission standards. Methods to check a vehicle's emission standard are as follows: 1. Visit the vehicle management office. Bring the vehicle registration certificate to the corresponding counter and ask the staff to check for you. 2. Online inquiry. Log in to the "Motor Vehicle Environmental Protection Website" and click "This query system is only for newly manufactured vehicles. Click here to check compliance status of other vehicles". 3. Check the environmental protection label on the annual inspection sticker, which clearly indicates the emission standard at the back.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.