What are the second maintenance items for the Boyue?

1 Answers
VanEmiliano
07/29/25 11:07pm
The second maintenance for the Geely Boyue is approximately at 6 months. The main items for the second maintenance include replacing the engine oil and oil filter, checking the battery, brake pedal and parking brake, brake pads and brake discs, brake fluid, clutch fluid, tires and tire pressure, lights, horn, wipers, and washers. Vehicle maintenance cycle: The maintenance cycle is set when the vehicle leaves the factory, so the "wrench" symbol will appear after a certain mileage to remind the driver to perform maintenance in time. Typically, the maintenance cycle is every 5,000-8,000 kilometers, and the factory-set cycle is slightly longer than 8,000 kilometers. After maintenance, the maintenance reminder light must be reset following a specific procedure to turn it off. It might also be that the reminder was not reset during the last maintenance, and performing the reset again will solve the issue. Regular maintenance items: Oil maintenance: Oil, also known as lubricant, helps reduce engine wear and provides cooling and lubrication. There are three types of oil: Full synthetic oil: needs replacement every 10,000-12,000 kilometers. If the car is not driven frequently, the oil may emulsify and lose effectiveness, requiring replacement after about a year. Semi-synthetic oil: needs replacement every 8,000-10,000 kilometers. Mineral oil: needs replacement every 5,000 kilometers.
Was this review help?
5
3
Share
More Forum Discussions

What is the fuel tank capacity of the Changan Oushang X7 in liters?

Changan Oushang X7 has a fuel tank capacity of 55 liters, which is the officially announced data. The fuel grade for Changan Oushang X7 is 92, with a fuel consumption of 7 to 7.4L per 100 kilometers. A full tank can cover a distance of 743 to 786km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel might exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
13
5
Share

Where is the OBD interface of the Peugeot 3008 located?

The OBD interface of the Peugeot 3008 is located in the fuse box position below the left side of the steering wheel. The OBD interface is a black and green socket, and you can directly pull it out by removing the decorative panel. Taking the 2019 Peugeot 3008 as an example, its body dimensions are: length 4435mm, width 1840mm, height 1652mm, wheelbase 2613mm, and fuel tank capacity 60L. The 2019 Peugeot 3008 is equipped with a 1.6L turbocharged engine, with a maximum horsepower of 167PS and a maximum power of 123kW, paired with a 6-speed automatic transmission.
20
2
Share

How often should the Languid tires be replaced?

Languid tires should be replaced after driving 60,000 kilometers or 3 years. The situations that require tire replacement are: 1. The tire wear has reached the wear limit mark; 2. The tire is aged, with numerous small cracks on the tread pattern; 3. Tires with deformed tread or damaged bead; 4. Bulging tires cannot be used. The maintenance methods for tires are: 1. Avoid curbs and potholes to prevent the sidewall cords from breaking and causing tire bulges; 2. Regularly remove debris from the tread grooves to avoid blowouts; 3. Check the tire wear condition and replace them in time; 4. Perform four-wheel rotation to avoid excessive wear; 5. Regularly check tire pressure, which should not be too high or too low.
1
1
Share

Where is the fuel pump located in a BMW X5?

BMW X5 fuel pump is located under the right rear seat. The types of fuel pumps include in-line, distributor, and single-unit. Taking the 2020 BMW X5 as an example, it is a mid-to-large-sized SUV with body dimensions of: length 4930mm, width 2004mm, height 1776mm, wheelbase 2975mm, minimum ground clearance 250mm, and curb weight 2240kg. The 2020 BMW X5 is equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 260ps, maximum torque of 400Nm, and maximum power of 195kW, paired with an 8-speed automatic transmission.
16
3
Share

What are the symptoms of turbocharger failure?

Turbine failure symptoms include: 1. Blue or white smoke from the exhaust pipe; 2. Decreased power; 3. Increased fuel consumption; 4. Increased oil consumption; 5. Metal friction sounds; 6. Oil leakage in the turbo intercooler pipes; 7. Engine oil entering the intake pipe. Turbocharging is a technology that uses exhaust gases from internal combustion engines to drive air compressors. Causes of turbocharger failure include: 1. Insufficient lubricating oil pressure and flow; 2. Debris or sediment entering the lubrication system, causing oil oxidation and deterioration; 3. Clogged turbocharger oil return pipe, leading to excessive oil accumulation in the intermediate support of the rotor assembly, which then flows along the rotor shaft into the compressor impeller.
2
1
Share

How to Reset the Maintenance Light on Hyundai Elantra?

Modern Elantra maintenance light reset method is relatively simple, press the maintenance light reset button in the middle of the three buttons on the lower right side of the odometer. Below is relevant information: 1. The Elantra is equipped with a maintenance reminder function. The maintenance reminder information will display a small wrench and text message in the center screen of the instrument panel, usually prompting one month in advance. The vehicle's computer calculates and displays the remaining time for maintenance based on the parameters (mileage or days) set in the system. 2. If the actual mileage or days driven by the Elantra have exceeded the set parameter values, the message 'Vehicle needs maintenance' will be displayed each time the ignition switch is turned to the ON position. To restore to the set maintenance interval mileage or days, simply hold down the confirmation (OK) button for more than 1 second.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.