What are the scheduling rules for Subject 4 driving test?

1 Answers
DanielDella
07/30/25 6:41am
Subject 4 scheduling rules are as follows: 1. Exam Plan: Accept applicants' test scheduling requests until the fifth day before the exam; for exam plans that are not fully booked, the acceptance period can be extended until the third day before the exam. 2. The computer system aggregates exam scheduling information and automatically sorts applicants according to the following rules: For first-time scheduling of Subject 1 test, sorting is based on the driver's license application acceptance time. For non-first-time scheduling of Subject 1 or scheduling other subject tests, sorting is based on the last exam time.
Was this review help?
16
5
Share
More Forum Discussions

Which way to turn the steering wheel when reversing into the right parking space?

When reversing into the right parking space, immediately turn the steering wheel all the way to the right when the lower edge of the rearview mirror covers the yellow line. Look at the right rearview mirror, and when the rear wheel is about 30cm away from the corner of the parking space, quickly turn the steering wheel back half a turn. Continue to observe the right rearview mirror, and when the car body is parallel to the side line of the parking space, straighten the steering wheel. After the car body enters the parking space, observe the left rearview mirror, and when the lower edge of the rearview mirror covers the yellow line, stop. When reversing into the right parking space, hold the steering wheel at the 9 o'clock and 3 o'clock positions respectively. Drive the car horizontally to the front of the position where you need to reverse until, when viewed from the right rearview mirror, the rear end of the car and the top of the reversing position are on the same plane. Put the car in reverse gear and turn on the turn signal. When the car reverses to about 20cm from the top of the reversing position, turn the steering wheel all the way to the right. Continue reversing, and when the rear of the car approaches the right boundary of the parking position, turn the steering wheel to the left. Adjust the turning force of the steering wheel according to the actual situation and continue reversing. After the car body enters the parking position, turn the steering wheel back according to the position of the front of the car to straighten the front of the car so that it is on the horizontal line of the parking position. Adjust the front and rear position of the car so that it is easy to leave the parking space when exiting.
1
4
Share

What Grade of Gasoline Should a Porsche 911 Use?

Porsche 911 should use 95-octane gasoline, as recommended in the vehicle's official owner's manual. In addition to checking the appropriate gasoline grade in the owner's manual, Porsche 911 owners can also find this information on the fuel tank cap, where it is usually indicated. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Cars with a compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is higher, 98-octane gasoline is recommended. However, with the use of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade, as high-compression engines can also be tuned to use lower-octane gasoline. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If a Porsche 911 occasionally uses the wrong gasoline grade, simply switching back to the correct grade after use is sufficient. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles designed for lower-octane gasoline, using a higher-octane grade will not cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-octane gasoline, using a lower-octane grade can cause engine knocking. The significantly lower octane rating lowers the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unevenly. Mild knocking may only increase noise without obvious engine damage, but severe knocking indicates serious engine issues, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring.
15
3
Share

Can You Start Practicing for Subject Two Only After Completing Subject One?

You can begin learning the Subject Two curriculum as arranged by the driving school after completing Subject One. The exam for Subject Two can be scheduled online 10 days after passing Subject One. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the registration requirement for Subject Two is completing 26 study hours, including 2 hours of theoretical knowledge, 3 hours of simulated driving, and 21 hours of practical training. For a C1 license, the Subject Two exam can be scheduled online 10 days after passing Subject One. Each Subject Two exam appointment allows for two attempts. If the first attempt is unsuccessful, a free retake is available. If the retake is not attended or is still unsuccessful, the exam session ends, and you can reschedule the Subject Two exam after 10 days. Within the validity period of the driving permit, the Subject Two exam can be scheduled up to 5 times. If the fifth attempt is still unsuccessful, the results of other passed subjects will be invalidated. To continue learning for the driving permit, you must restart the process by scheduling Subject One again. Subject Two Exam Content: Driving a motor vehicle within a designated area to complete exam tasks; demonstrating mastery of vehicle driving skills; and assessing the ability to judge the spatial position of the vehicle. Subject Two, also known as the small road test, includes five mandatory tasks: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. Subject Two Exam Tips: After getting into the car, always adjust the seat and mirrors to a suitable position and state, and ensure the seatbelt is fastened. For parallel parking, find the correct angle quickly, turn the steering wheel rapidly, and react promptly to match the vehicle's speed. On slopes, remember to engage the handbrake when stopping. When starting, signal left, release the handbrake, and stabilize the clutch while gently pressing the accelerator to avoid stalling or rolling back. For right-angle turns, identify the turning point quickly and steer in sync with the vehicle's speed to prevent deviation. For curve driving (S-turns), slow down. Those with good driving sense may navigate smoothly in one go. During reverse parking, control the speed, identify reference points, and make minor adjustments if deviations are noticed in the mirrors. The driving test consists of three subjects: Subject One, Subject Two, and Subject Three. Subject One covers traffic laws, regulations, and related knowledge. Subject Two assesses driving skills in a designated area. Subject Three includes two parts: on-road driving skills and safety and civilized driving knowledge. The safety and civilized driving test is conducted after Subject Three, commonly referred to as Subject Four, though the official term (as per Public Security Ministry Order No. 123) does not include "Subject Four."
3
1
Share

What happens if I don't bring my ID card for the Subject 1 test and don't take the exam?

If you don't bring your ID card for the Subject 1 test and don't take the exam, and also don't cancel it, it will be considered as a failed test. If you don't have your ID card, you can apply for a temporary ID card. A temporary ID card has the same validity as a formal ID card. The admission ticket and other documents are handled by the driving school, which will distribute them during the test. Electronic ID cards cannot be used for the exam. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", on the day of the Subject 1 test, you can take the exam twice. If you fail the first time, you can retake it for free the second time. If you still fail the second time, the Subject 1 test will be terminated, and you can only reschedule the exam after ten days. The Subject 1 test for the driving license consists of 100 questions, divided into single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If you answer 11 questions incorrectly during the test, the system will automatically submit the exam and end the test. The Subject 1 test is a computer-based exam, and the test duration is 45 minutes. The content of the Subject 1 test includes: regulations on driving licenses and motor vehicle management; road traffic conditions and regulations; road traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Notes for the Subject 1 test: During the Subject 1 test, students should pay attention to their attire. Slippers are not allowed, and electronic devices and bags are not permitted in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the notes and procedures on the large screen, and place personal belongings in the lockers before entering the exam room. Upon entering the exam room, the identity verification area will assign seats. After finding your seat, start the exam. Ensure the camera is aligned with you and follow the exam rules. If you fail the first time, you can retake the exam on the same day. If you fail again, you will need to pay and reschedule. After the exam, queue to collect your score report and sign it. If you don't sign, it will be considered invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, and if you fail, you can retake it once. If you don't take the retest or fail the retest, the exam will be terminated, and you must reschedule. For Subject 2 and Subject 3, there are only five exam attempts. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, the previously passed road driving skills test results remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe driving knowledge test. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, in the official terminology (i.e., the Ministry of Public Security Order No. 123), there is no such term as Subject 4. The test duration is 45 minutes.
2
3
Share

What Suspension Does the Hongqi HS5 Use?

The Hongqi HS5 uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. The MacPherson strut independent suspension is a common type of front suspension widely used in vehicles. It mainly consists of a coil spring, shock absorber, and lower control arm, offering numerous advantages. The Hongqi HS5 is positioned as a midsize SUV, with body dimensions of 4760mm in length, 1907mm in width, and 1700mm in height, and a wheelbase of 2870mm.
12
1
Share

Can a Gasoline Car Run on Diesel?

Gasoline cars cannot run on diesel for the following reasons: 1. The fuel injector pressure is insufficient, causing diesel to only partially atomize and enter the cylinder in liquid form, leading to incomplete combustion, carbon buildup, and clogged injectors; 2. Before the spark plug ignites, the high-pressure mixture reaches the auto-ignition temperature, resulting in violent combustion, abnormal pressure in the combustion chamber, and potential engine damage, including cylinder scuffing. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum through distillation or cracking processes, primarily composed of aliphatic hydrocarbons, naphthenes, and a certain amount of aromatic hydrocarbons, used as fuel.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.