What are the safety features of the Huansu S7?

Where is the horn location of the Emgrand GS?

Geely Emgrand GS horn locations: There are two audio speakers on each of the front left and right doors inside the car; one on each side of the rear doors; and two external honking horns. Introduction to the Emgrand GS honking horn: It uses a crystal-cut DL16312V 4-inch horn, weighing 1KG, with an impedance of 2 ohms, a rated power of 60W, a sensitivity of 92db/W, a distortion rate of 2%, a dual-channel sound unit, and a peak power of 60W. Car horn maintenance: Keep the horn surface clean regularly and ensure all connections are secure. Frequently inspect and tighten the horn and bracket mounting screws to ensure proper grounding. The horn's mounting method significantly affects its sound quality. For normal sound output, the horn should not be rigidly mounted. Instead, it should be fixed on a cushioning bracket, meaning a leaf spring or rubber pad should be installed between the horn and the mounting bracket. Regularly check the generator's output voltage. Excessive voltage can burn the horn contacts, while insufficient voltage will cause abnormal sounds from the horn.

10

0

Share

What are the differences between Tuano National 5 and National 6?

Tuano National 5 and National 6 differ in emission standards, principles, and their impact on vehicle registration. The specific differences are as follows: Different emission standards: The emission standards for National 6 are more than 30% stricter than those for National 5. Excluding the influence of operating conditions and testing, gasoline vehicles reduce carbon monoxide emissions by 50%, total hydrocarbons and non-methane hydrocarbons emissions by 50%, and nitrogen oxide emissions by 42%. Different principles: During the National 5 phase, diesel and gasoline vehicles had different emission standards. However, National 6 adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type used. Different impacts on vehicle registration: After the formal implementation of the National 6 standard, the main impacts will be on the production, import, sale, and registration of new vehicles. Existing National 5 new vehicles will no longer be allowed to be registered. However, previously registered National 5 vehicles can continue to be used, will not affect normal annual inspections, and can be traded as used cars normally.

4

2

Share

What kind of warning light will be displayed when the Audi A6 needs to replace brake pads?

Audi A6's brake pad replacement warning light is a symbol with a circle inside brackets. This indicator is used to display the wear condition of the vehicle's brake pads. Introduction to the brake pad warning system: The system involves inserting a warning line into the brake pad. If the brake pad wears excessively, the sensor line will come into contact with the brake disc or get worn out, causing a change in resistance, which generates an electric current. When the signal is detected, a brake pad warning light will appear on the dashboard. The illumination of the brake pad wear indicator indicates severe brake pad wear, requiring immediate inspection and replacement at a service center; it could also indicate low brake fluid level, as insufficient brake fluid can reduce braking force and, in severe cases, lead to brake failure, necessitating immediate replenishment of brake fluid; or it could be due to brake system oil leakage, false alarms, etc., which require thorough investigation. Method to clear the brake pad warning light: First, enter the driver's seat, then without pressing the brake pedal, press the start button once to illuminate all dashboard lights. Then, press and hold the reset button on the top left of the dashboard for about 8 seconds, release it, and press it once again. The illumination of the brake pad wear indicator indicates severe brake pad wear, requiring immediate inspection and replacement.

18

5

Share

Where is the spare tire of the Xpeng G3?

Xpeng G3 does not have a spare tire designed. On one hand, the battery needs to be designed under the car, and on the other hand, to extend the driving range, the vehicle weight needs to be reduced. Introduction to Xpeng G3: The Xpeng G3 adopts pure electric new energy, with the motor delivering power faster and stronger explosive force. The whole vehicle has an ultra-low drag coefficient of 0.30. The Xpeng G3 can accelerate from 0 to 50KM in just 3.7S. The drive motor of the Xpeng G3 can output 145KW of power and 300Nm of torque, equivalent to the power of a 2.0T turbocharged engine and a 3.0 naturally aspirated engine. The vehicle features a 3x3 driving mode, allowing adjustments between sport, comfort, economy, and three levels of energy recovery modes. Definition of a spare tire: A spare tire refers to the backup tire of a car, which usually has the same specifications as the original car tires. However, in some vehicles, to remind the owner to inspect and replace faulty tires in time, special forms of spare tires such as those with colored rims, compact spare tires, folding spare tires, or run-flat tires are used.

7

3

Share

How many days will it take to receive a notification for running a red light with a large vehicle?

After running a red light, you will generally receive a notification within about 3 to 7 days, with the latest being around 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. But this notification does not equate to a traffic violation; it serves only as a capture alert. The final determination of whether it is a violation still takes 3-7 days. If it is indeed a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners usually do not receive the violation SMS immediately. There is a delay, and the duration may vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then handed over to the relevant staff for verification. Once the violation is confirmed, the system will automatically query the vehicle owner's phone number based on the license plate information and then send the violation details via SMS to the owner. After receiving the violation SMS, the vehicle owner must settle all previous violations within one month before the annual vehicle inspection. Generally, if a vehicle owner suspects they have committed a violation, they can use 15 days as a benchmark. If no violation SMS is received beyond 15 days, it is likely that no violation has been recorded. Traffic Violation Query Methods: Traffic violation queries refer to checking motor vehicle violations of traffic management through online platforms or query terminals. Methods to query traffic violations include vehicle violation websites, phone queries, SMS queries, mobile apps, and offline terminal queries. Website Query: You can search for "vehicle violation query" and input your vehicle information to check. Phone Query: To query violations, you can call the local 114 (area code + 114) or 12580 for confirmation. Violations can only be processed at the location of the violation or the vehicle license plate issuance authority. For on-the-spot violations, such as those directly caught by traffic police, they must be handled at the location of the violation. SMS Query: Open your phone's SMS interface; enter "WZ" followed by your license plate number and color; send the message to 1062650001. Mobile App Query: Open the Traffic Management 12123 app, select "Violation Query," and find any unprocessed violations to clear them. Offline Terminal Query: You can visit the local traffic management hall and use the self-service query machine to input your license plate number and check recent violation records.

15

3

Share

How many days to receive notification for running a red light with a large vehicle?

After running a red light, the illegal photo notification SMS is usually received within about 3 to 7 days, and at the latest, within about 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. But the notification does not equate to a traffic violation; it is merely a capture alert. The final determination of whether it is a violation still takes 3-7 days. If it is indeed a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive the violation SMS immediately. There is a delay, and the duration may vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted to the traffic police management center through a dedicated channel, then compiled and handed over to the relevant staff of the traffic police department for verification. Only after the violation is confirmed will the system automatically query the corresponding vehicle owner's mobile phone number based on the license plate information and send the violation details via SMS to the owner. After receiving the violation SMS, the vehicle owner must go to the traffic police department at the location of the violation within one month before the annual vehicle inspection to handle the matter. Generally, if a vehicle owner suspects they have committed a violation, they can use 15 days as a benchmark. If no violation SMS is received beyond 15 days, it is likely that no violation was recorded. Traffic violation query methods: Traffic violation query refers to checking motor vehicle violations of traffic management through online or terminal methods. Car violation queries can be done via car violation websites, phone calls, SMS, or mobile apps. Website query: You can search for "vehicle violation query" and enter vehicle information to check. Phone query: To query violations, you can call local 114 (area code + 114) or 12580 for traffic violation confirmation. Violations can only be processed at the location of the violation or the vehicle license plate issuance location. For on-the-spot violations, such as those directly caught by traffic police, they must be handled at the violation location. SMS query: Open the SMS interface on your phone; enter the violation license plate number in the message content; input 1062650001 as the recipient and click send. Mobile app query: For iOS 15 and above, use the Traffic Management 12123 app (V2.8.1B437), or for Android 12 and above, use the Traffic Management 12123 app (V2.8.1B274). For example, on an iPhone, open the app and select "violation query" to check.

7

4

Share

What are the safety features of the Huansu S7?

Where is the horn location of the Emgrand GS?

What are the differences between Tuano National 5 and National 6?

What kind of warning light will be displayed when the Audi A6 needs to replace brake pads?

Where is the spare tire of the Xpeng G3?

How many days will it take to receive a notification for running a red light with a large vehicle?

How many days to receive notification for running a red light with a large vehicle?

How Heavy is a Volkswagen 16-inch Wheel Hub?

How many kilometers can the spare tire of Nissan Sylphy run?

Does the BMW JBE module control fuel injection?

Is the Envision 1.5 Dual Clutch Dry Type?