···
Log in / Register

What are the rules for traffic lights at intersections?

4 Answers
VonEmersyn
07/30/25 12:13am

The rules for traffic lights at intersections are as follows: 1. When the green light is on: Vehicles are allowed to pass, but turning vehicles must not hinder the passage of straight-going vehicles and pedestrians. 2. When the yellow light is on: Vehicles that have already crossed the stop line may continue to pass. 3. When the red light is on: Vehicles are prohibited from turning left and going straight. When the red light is on, right-turning vehicles may pass provided they do not hinder the passage of other vehicles and pedestrians. At intersections without dedicated non-motor vehicle or pedestrian traffic lights, non-motor vehicles and pedestrians should follow the indications of the motor vehicle traffic lights.

Was this review help?
1
2
Share
SpencerRose
08/16/25 4:22am

As an experienced driver, I've encountered countless traffic light situations at intersections. When the light is red, you must come to a complete stop and must not proceed or stop beyond the stop line; when the light turns green, you can proceed, but you must first look around to confirm safety, paying attention to pedestrians and bicycles; the yellow light warns you to slow down and prepare to stop, not to accelerate and rush through. When turning right, some places allow right turns on red, but you must check road signs or signal indications and unconditionally yield to all through traffic and pedestrians crossing the street. Left turns require waiting for a green light, and if there is a dedicated left-turn signal, follow its instructions. When stopping at intersections, avoid blocking the crossing, especially during peak hours. If the traffic signal malfunctions, all vehicles should take turns to proceed to maintain order. These rules also apply in poor weather conditions, such as rain or fog, when you should slow down earlier. Following these basics not only helps avoid police fines but, more importantly, protects your safety and that of others. I always encourage everyone to be patient with each signal change and not to risk rushing for a few seconds.

Was this review help?
12
2
Share
Expand All
Norma
10/19/25 6:41am

As a parent, I teach my child traffic safety concepts through the rules of traffic lights at intersections. A red light means you must stop and wait, not crossing the white line to interfere with other vehicles or pedestrians. When the light turns green, proceed with caution, but I always instruct my child to first check for pedestrians crossing or obstacles in blind spots. A yellow light signals to slow down and prepare to stop, explaining that it's not a time to speed up. During family trips, I emphasize that right turns may sometimes be allowed on red at certain intersections, but safety always comes first—complete yielding is mandatory. Left turns require waiting for a green light and patiently looking for a safe gap. I use an analogy for my child: an intersection is like a shared space where everyone follows the signals to avoid conflicts. When stopping, don’t block the crosswalk, as it hinders pedestrian movement. Following these rules helps children develop good habits early, reducing accident risks. I also frequently remind them to be extra cautious with light changes when driving at night, ensuring clear visibility before moving.

Was this review help?
1
1
Share
Expand All
VanKai
12/02/25 7:17am

Daily city driving to and from work involves simple yet often overlooked traffic light rules at intersections. A red light means you must stop—never rush through or halt in the middle of the road. When the light turns green, scan the entire intersection before proceeding, staying alert for sudden hazards. A yellow light signals immediate deceleration to prepare for a full stop. Right turns may sometimes be allowed at red lights depending on road conditions, but always yield absolutely. For left turns, wait for the green light and let straight-moving vehicles pass first. Avoid starting before the signal changes or stopping too far forward, which can block traffic flow. These rules keep intersections running smoothly, reducing congestion, especially during morning rush hours. As an ordinary commuter, I always remind myself to stay calm with every light change—driving neither too fast nor too slow, following regulations to ensure an efficient commute.

Was this review help?
1
3
Share
Expand All
More Forum Discussions

Which Country's Car is Trumpchi?

Trumpchi is a domestic Chinese car brand. Trumpchi is a subsidiary of GAC Group and possesses the capability to compete with joint-venture brands and imported brands of the same level in terms of technology, configuration, and quality. As a pioneer among independent brands, it continues to make strides in the mid-to-high-end market. Introduction to Trumpchi Engines: The engines of GAC Trumpchi are independently developed in China and produced at GAC's engine plant. After localization, direct injection and dual spark plugs were removed, but the high-speed performance remains excellent. The engine features variable intake valves, variable intake manifolds, and a dual four-door spring design. The Trumpchi engine originates from the Alfa Romeo 2.0 dual-spark plug engine and has been continuously improved to develop the GAC Trumpchi engine. Basic Parameters of Trumpchi GS4: The Trumpchi GS4 is equipped with a third-generation 270T 1.5T high-power engine, paired with an Aisin 6-speed automatic transmission, delivering a maximum power of 124 kW and a peak torque of 265 Nm.
13
3
Share

Where are the fog lights on a Toyota Prado?

Toyota Prado front fog lights are located at the lowest part of the front bumper, while the rear fog lights are positioned on both left and right sides of the rear. The purpose of fog lights is to enhance vehicle visibility during foggy or rainy conditions when visibility is significantly reduced, allowing other drivers to see your vehicle. Therefore, fog lights require light sources with strong penetration capability. Most vehicles use halogen fog lights, while more advanced models may feature LED fog lights. In low-visibility conditions, fog lights should be activated in advance to warn approaching vehicles. Operation method: The fog light switch knob is located at the center of the light control stalk, and can be activated by simply rotating to the corresponding position.
12
3
Share

What is the tire size of the VV7?

The tire size of the VV7 is 255/45R21, using Giti series tires. The length, width, and height of the VV7 are 4774mm, 1931mm, and 1672mm respectively, with a wheelbase of 2950mm. The VV7 is equipped with LED headlights, RCW rear collision warning, keyless entry, a panoramic sunroof, ACC adaptive cruise control, a streaming media rearview mirror, a full LCD instrument panel, driver assistance, automatic air conditioning, and other features. In terms of power, it is equipped with a 2.0T turbocharged engine, with a maximum power output of 167 kW and a maximum torque of 387 Nm.
7
2
Share

How to Replace the Coolant in a Passat?

The method to replace the coolant in a Passat is as follows: 1. Remove the front grille by unscrewing it directly with a screwdriver; 2. After removing the screws, manually pry it open to reveal the drain port, then unscrew the drain plug with a screwdriver while opening the coolant filler cap; 3. Wait until the colored coolant has mostly drained out, then screw the drain plug back in and refill with new coolant. Coolant prevents the freezing of the liquid in the cooling system during cold winter stops, which could otherwise cause the radiator to crack or the engine cylinder block or head to freeze. There are many types of automotive antifreeze, including inorganic compounds like calcium chloride and organic compounds like methanol, ethanol, ethylene glycol, glycerin, and lubricating oils.
2
3
Share

What are the steps to start a car?

The steps to start a car are: 1. After getting in the car, adjust the seat to a comfortable position and fasten the seat belt; 2. Start the car and shift into gear; 3. Turn on the left turn signal and honk the horn as a signal; 4. Press the accelerator with your right foot, steady the steering wheel with your left hand, hold the front end of the handbrake with your right hand, and quickly release the handbrake when you hear the engine sound change from high-pitched to steady. In winter, it is advisable to warm up the car before starting to reduce damage to the vehicle. During normal driving, if the speed feels sufficient, you may not need to press the accelerator, but keep your right foot near the brake pedal to be ready for emergency situations.
15
5
Share

How many liters of engine oil does the Tiggo 8 require?

Tiggo 8 requires 4.7 liters of engine oil. Generally, adding 4 liters is sufficient, as this amount ensures the oil level on the dipstick remains between the minimum and maximum marks. The Tiggo 8 has a body size of 4700 mm in length, 1860 mm in width, and 1746 mm in height, with a wheelbase of 2710 mm. In terms of safety features, this vehicle is equipped with ESC, ABS and EBD, daytime running lights, rear parking sensors and panoramic imaging, hill start assist, and active braking. For power, the Tiggo is paired with a 1.6T turbocharged engine, which is Chery's third-generation engine, delivering a maximum power of 145 kW and a maximum torque of 290 Nm. The transmission system is matched with Getrag's 7-speed wet dual-clutch transmission, paired with a dual-clutch gearbox.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.