···
Log in / Register

What are the rules for the parallel parking test in Subject 2?

3 Answers
McHector
07/29/25 7:27pm
In the Subject 2 driving test, it is essential to be familiar with the examination rules. Below is a detailed introduction to the rules for the Subject 2 test: 1. Test Objective: To assess the driver's ability to correctly park the vehicle into a roadside parking space on the right side. 2. Operation Requirements: The driver must maneuver the vehicle into the right-side parking space without the wheels touching the lane boundary lines or the parking space boundary lines. 3. Grading Criteria: After the vehicle is parked and comes to a stop, if the vehicle body crosses the boundary lines, 100 points will be deducted. If the wheels touch the lane boundary lines during the maneuver, 10 points will be deducted. If the vehicle is not parked within the designated space, 100 points will be deducted. If the left turn signal is not activated when starting, 10 points will be deducted. If the vehicle stops midway during the maneuver, 100 points will be deducted.
Was this review help?
4
0
Share
LaDamian
08/14/25 2:16pm
I just passed the driving test's Subject 2, and the parallel parking section has quite a few rules. You must completely park the car in the designated spot within 90 seconds, with no part of the vehicle touching or crossing the boundary lines—otherwise, it's an immediate fail. You need to signal before starting and use the right turn signal when exiting the spot; forgetting either means no pass. The steps are: first, align the car with the reference point, slowly reverse while checking the right mirror, and turn the steering wheel fully when the right rear wheel passes the corner of the parking space, then adjust the parking position. Common mistakes include turning too early or too late, causing the wheels to touch the lines, or failing to stop steadily within the box. During practice, I kept touching the lines, but focusing on speed control helped a lot. Remember not to stall or exceed the time limit—you only get one attempt per try, so practice until it becomes muscle memory before the test.
Was this review help?
5
5
Share
Expand All
Benjamin
10/15/25 5:17am
From years of teaching experience, the key points of parallel parking rules lie in accuracy and speed control. There's a 90-second time limit, and you must follow the prescribed steps to park in the designated spot. The procedure involves first driving into the area to align, then reversing while observing the right rearview mirror. After the right rear wheel passes the corner of the parking space, turn the steering wheel fully to the left and stop. It's crucial to ensure the vehicle is within the lines without touching them, and to use the right turn signal when exiting. The scoring standards are strict: touching a line results in a 100-point deduction and failure, while exceeding the time limit, failing to signal, or stalling each deduct 10 points, potentially leading to failure. During practice, emphasis is placed on reference points and steering techniques. It's recommended to use cones for assistance to get accustomed to the reference points and rhythm. Don't rush and lose composure—safety first is the way to pass.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

How long after applying car window film can you roll down the windows?

After applying car window film, you can roll down the windows after three days in summer and seven days in winter. The method of applying the film is as follows: 1. Install interior protection for the vehicle; 2. Cut the car sun film according to the size of the windows; 3. Wipe and clean the front and rear windshield glass; 4. Use a heat gun to shape the film; 5. Fine-trim the film after shaping is completed. The functions of the car film are: 1. Block the heat generated by infrared rays; 2. Block ultraviolet rays to prevent skin damage; 3. Safety and explosion-proof, the film has strong tear and puncture resistance; 4. Maintain privacy and safety; 5. Reduce the load on the air conditioning system; 6. Reduce accidents caused by glare factors.
15
4
Share

What colors are available for the Haval H5?

The colors available for the Haval H5 include: Pearl Black, Cosmic Blue, Olive Green, Noble Black, Starlight Silver, Rose Red, Titanium White, and Fashion Orange. Taking the 2018 Haval H5 as an example, it belongs to the compact SUV category, with body dimensions of: length 4645mm, width 1800mm, height 1755mm, wheelbase of 2700mm, fuel tank capacity of 70l, and curb weight of 1740kg. The 2018 Haval H5 features a double-wishbone independent front suspension and a five-link non-independent rear suspension. It is equipped with a 2.0l turbocharged engine, delivering a maximum horsepower of 190ps, maximum power of 140kw, and maximum torque of 250nm, paired with a 6-speed manual transmission.
9
5
Share

Is the Chevrolet Tracker a Three-Cylinder?

The Chevrolet Tracker is a three-cylinder vehicle, equipped with a 1.3-liter turbocharged engine. The engine is the device that provides power to the car, determining its power, fuel efficiency, stability, and environmental friendliness. The 1.3-liter turbocharged engine in the Chevrolet Tracker delivers 165 horsepower and a maximum torque of 240 Nm. This engine can output its maximum power at 5600 rpm and features direct fuel injection technology, along with an aluminum cylinder head. The Chevrolet Tracker is a compact SUV with the following body dimensions: length 4411mm, width 1803mm, height 1633mm, and a wheelbase of 2640mm.
16
2
Share

Is it safe to drive with a tire pressure of 185?

A tire pressure of 185 is not safe for normal driving. Low tire pressure increases the contact area between the tire and the ground, leading to abnormal temperature rises inside the tire during driving. Additionally, severe deformation of the tire sidewall accelerates the aging of internal steel wires and fabric layers, increasing the risk of a blowout. It also raises fuel consumption and reduces tire lifespan. Factors affecting vehicle tire pressure include: 1. Seasonal factors: In winter, it's advisable to slightly increase the tire pressure by about 0.2 bar based on the standard tire pressure. In summer, adhere to the lower limit of the standard tire pressure; for vehicles parked outdoors, the pressure can generally be about 0.1 bar lower than the standard to prevent blowouts due to high temperatures. 2. Load conditions: For empty or half loads, use the lower limit of the standard tire pressure (the tire pressure indicated on the vehicle's sticker can serve as a reference for the minimum pressure). For full loads, use the upper limit of the standard tire pressure (the maximum pressure marked on the tire can be a reference for the theoretical maximum pressure). 3. Tire pressure measurement environment: Cold and hot tires have different pressures, with a difference of about 0.3 bar, so measurement should be done accordingly. 4. Road conditions: On rough roads, it's appropriate to slightly decrease the tire pressure by 0.1-0.2 bar from the standard. For long-distance high-speed driving, the tire pressure should not be too low; it's advisable to slightly increase it by about 0.2 bar from the standard lower limit.
15
3
Share

What Causes Engine Backfire?

Engine backfire can be caused by: 1. Slow combustion of the air-fuel mixture; 2. Incorrect ignition sequence; 3. Low battery voltage; 4. Faulty coolant temperature sensor or air flow meter; 5. Excessive ignition advance angle; 6. Incorrect valve timing; 7. Excessive carbon buildup on valves; 8. Misfiring spark plugs. The main components of an engine include: 1. Valve train; 2. Crankshaft and connecting rod assembly; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. The functions of an engine are: 1. Generating power by fully combusting fuel in the cylinders; 2. Determining vehicle performance, fuel efficiency, stability, and environmental friendliness.
5
4
Share

Which country does the MG6 brand belong to?

MG is a British brand, and the MG6 is one of its models. Its production line was transformed from the original British Rover production line, and the engine is largely based on the original British Rover K-series engine, with some modifications and adjustments made domestically. Taking the 2020 MG6 as an example, it is a compact car with body dimensions of: length 4704mm, width 1848mm, height 1466mm, and a wheelbase of 2715mm. The fuel tank capacity is 50 liters. The 2020 MG6 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 181 PS, a maximum power of 133 kW, and a maximum torque of 285 Nm. It is paired with a 6-speed manual transmission.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.