What are the rules for stopping midway during Subject 3 driving test?

1 Answers
StLawson
07/24/25 10:46pm
Here are the rules regarding stopping midway during Subject 3 test: 1. When encountering vehicles ahead during the test: If the vehicle ahead isn't completely stopped, you should follow slowly. If the vehicle ahead is completely blocking the way, you must stop and wait. 2. Don't stop on zebra crossings: When encountering pedestrians crossing, you must stop the vehicle before the zebra crossing. Continuing forward will result in the safety officer forcibly applying the brakes. 3. Don't stop at intersections: Intersections are merging points for traffic lanes. Blocking them would severely affect traffic flow and pose accident risks.
Was this review help?
20
3
Share
More Forum Discussions

Is the Notice a Fine or a Warning?

A notice is issued to inform the driver of a violation. Whether a fine is imposed depends on the severity of the violation. If the violation is not severe, no penalty will be imposed, and it serves only as a reminder or warning. When you receive a violation notice, you should check whether a fine is involved. You can handle the matter at the local traffic police station. If you receive a penalty decision, a fine is required and must be paid within 15 days; otherwise, late fees will be incurred. The notice is typically placed on the windshield of illegally parked vehicles to notify the owner to address the violation at the traffic police station. Different colored notices indicate different penalty outcomes: 1. Orange: For serious traffic violations observed by traffic police on-site, a certain fine and deduction of driver's license points will be imposed. 2. Green: Mainly used for minor traffic violations. This type of notice usually does not result in point deductions or fines, and only requires the driver to undergo education.
2
1
Share

What does the tire size 205/55r16 mean?

The tire size 205/55r16 represents the specification of the tire. The section width of the tire is 205 millimeters, the aspect ratio is 55, 'r' indicates that the tire is a radial tire, and 16 is the rim size, meaning the tire can be mounted on a 16-inch wheel. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground, usually mounted on metal rims. They support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing capacity, traction performance, and cushioning performance.
1
1
Share

What are the latest speed limit regulations on highways?

The latest speed limit regulations on highways are: 1. The maximum speed on highways must not exceed 120 kilometers per hour, and the minimum speed must not be less than 60 kilometers per hour; 2. Pedestrians, non-motor vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailers, and other motor vehicles with a design speed of less than 70 kilometers per hour are not allowed to enter highways; 3. The maximum speed for small passenger cars on highways must not exceed 120 kilometers per hour, other motor vehicles must not exceed 100 kilometers per hour, and motorcycles must not exceed 80 kilometers per hour; 4. For roads with two lanes in the same direction, the minimum speed for the left lane is 100 kilometers per hour, and the minimum speed for the middle lane is 90 kilometers per hour. If the speed limit indicated by road signs is inconsistent with the above lane speed regulations, drivers should follow the speed indicated by the road signs.
8
0
Share

Why is tire rotation not recommended after 50,000 kilometers?

After 50,000 kilometers, tire rotation is not recommended because the tire wear pattern has already been established, and performing a rotation may cause the vehicle to pull to one side. However, for models with less stringent alignment specifications, regular tire rotation is still necessary. This is because the vehicle's weight is not evenly distributed across all four tires, and periodic rotation helps maintain even wear across all tires, extending their overall lifespan. The front and rear tires experience different types of friction: the front tires bear more lateral friction, while the rear tires mainly endure longitudinal friction. Additionally, the drive wheels experience greater friction than the non-drive wheels, leading to more severe wear. Therefore, tire rotation is essential to ensure even wear between the front and rear tires, enhancing driving safety.
4
4
Share

How to Match Manual Transmission Gears with Speed?

Manual transmission gear and speed matching method is: 1. Start in 1st gear, when the speed reaches 15 km/h, you can shift to 2nd gear; 2. When the speed reaches 25 km/h, you can shift to 3rd gear; 3. When the speed reaches 35 km/h, you can shift to 4th gear; 4. When the speed reaches 45 km/h, you can shift to 5th gear. You should shift to the appropriate gear according to the speed. Do not drive at low speeds with high gears for extended periods, which is a common mistake made by beginners and will undoubtedly significantly increase fuel consumption. Conversely, driving at high speeds with low gears is also not advisable, as it increases engine load and damages engine lifespan. When shifting gears, you can refer to the engine speed and vehicle speed. Driving at an engine speed close to the peak torque output is more fuel-efficient.
15
3
Share

How to Quickly Register a Vehicle Without a Residence Permit?

Methods for quickly registering a vehicle without a residence permit: Some local police stations may provide a temporary certificate for obtaining a residence permit before the actual permit is issued, which can be used for vehicle registration. It's important to note that not all regions may allow this method for quick registration, so it's advisable to consult the local vehicle management office for specifics. If you plan to purchase a new car, always ensure that all required documents are complete to avoid any delays in registration. For individuals with non-local household registration who start working in a new area, it's recommended to report and register for residence at the local town or street-level migrant population service management agency. Documents required for obtaining a residence permit: 1. Personal resident ID card; 2. Personal photo (residence permit photo receipt) or photo information read from the ID card chip by staff; 3. Residence registration receipt; 4. Proof of local address, employment, or enrollment, among others.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.