What are the rules for new energy vehicle license plates in Beijing?

What is the replacement interval for a timing belt?

The replacement interval for a timing belt is approximately 60,000 kilometers, but it varies depending on the vehicle model. The exact replacement interval can be found in the vehicle's maintenance manual, and it should adhere to the manufacturer's requirements. The functions of a timing belt are: 1. To drive the engine's valve train; 2. To ensure the engine's intake and exhaust valves open and close at the appropriate times; 3. To guarantee the engine cylinders can properly intake and exhaust air. The steps to replace a timing belt are: 1. Lift the vehicle and remove the right front wheel fender liner; 2. Remove the alternator belt and alternator belt tensioner; 3. Loosen the crankshaft pulley bolt; 4. Open the engine hood and remove the coolant reservoir; 5. Remove the engine mounting bracket and the protective cover on the timing belt; 6. Unscrew the alternator mounting bolt and remove the alternator; 7. Remove the cylinder block mounting bracket and take off the crankshaft pulley; 8. Rotate the crankshaft to the top dead center position of the cylinder and mark it; 9. Remove the timing belt and timing tensioner for replacement.

10

2

Share

What car has a triangle next to an S?

A triangle next to an S represents DS Automobiles, a premium luxury automotive brand under the PSA Group. The full French name of DS is 'Deesse,' which means 'goddess' in French. DS is a top-tier luxury automotive brand in French industrial design and is highly popular in French politics, often referred to as the presidential car. From Charles de Gaulle to François Hollande, DS has served as the official vehicle for French presidents. The PSA Group is a French private automotive manufacturing company owned by Peugeot S.A., encompassing five major automotive brands: Peugeot, Citroën, DS, Opel, and Vauxhall.

16

3

Share

What is the BMW Auto Start-Stop Function?

Engine auto start-stop technology automatically shuts off the engine when the vehicle comes to a temporary stop (such as waiting at a red light) during driving. When it's time to move forward again, the system automatically restarts the engine. 1. Advantages of the auto start-stop function: The benefit is that when driving on stop-and-go roads, shutting off the engine under conditions where auto start-stop is active can save fuel and reduce exhaust emissions. 2. Disadvantages of the auto start-stop function: The auto start-stop function places stringent demands on the battery. Vehicles equipped with this feature require larger batteries and higher-quality starter motors.

9

1

Share

What is the BSD button on Borgward?

BSD: Blind Spot Detection system, which uses millimeter-wave radar to detect the blind spots on both sides of the vehicle while driving. If another vehicle enters the blind spot area, it will alert the driver with a light indicator on the rearview mirror or a designated position, along with a buzzer alarm, informing the driver of the best time to change lanes and significantly reducing the risk of traffic accidents caused by lane changes. Additional information: The Blind Spot Vehicle Identification System not only helps drivers stay relaxed and comfortable but also plays a crucial role in driving safety. 1. Reduces safety hazards during lane changes; 2. Minimizes uncertainty in judgment; 3. Enhances driving safety.

5

Share

What Causes the Popping Sound from the Exhaust Pipe When Starting a Car?

Abnormal sounds from the exhaust pipe are mainly caused by an excessively rich or lean air-fuel mixture. The reasons for and solutions to abnormal sounds from a car's exhaust pipe are as follows: 1. Damaged exhaust pipe: The engine exhaust emits high-temperature and high-pressure exhaust gases, along with some backfire explosions. In this case, the exhaust pipe needs to be replaced immediately. 2. Engine misfire: In a multi-cylinder engine (most car engines are four-cylinder), the exhaust processes of each cylinder are interconnected. If one cylinder stops working, the exhaust sequence will be disrupted, causing abnormal sounds from the exhaust pipe. In this situation, professional repair personnel must be consulted for repairs.

19

2

Share

Why can't the OBD be read at the vehicle inspection station?

If the OBD cannot be read at the vehicle inspection station, it may be due to a malfunction of the diagnostic tool or because the diagnostic tool does not support the communication protocol of the car's ECU. In such cases, it is recommended to try using a different diagnostic tool. The ECU, known as the brain of the engine, is present in every car and is responsible for controlling the engine's operation. If the car is equipped with an automatic transmission, there will also be a TCU, which is the computer for the automatic transmission. Without the TCU, the automatic transmission cannot function properly. The TCU collects various information through sensors and, after processing, controls the transmission shifting via actuators.

16

5

Share

What are the rules for new energy vehicle license plates in Beijing?

What is the replacement interval for a timing belt?

What car has a triangle next to an S?

What is the BMW Auto Start-Stop Function?

What is the BSD button on Borgward?

What Causes the Popping Sound from the Exhaust Pipe When Starting a Car?

Why can't the OBD be read at the vehicle inspection station?

What is the function of the S gear in an automatic transmission car?

Do You Need to Press the Brake When Shifting Gears While Driving an Automatic Transmission?

How are sedan classes divided?

What engine is used in the R8 convertible?