···
Log in / Register

What are the rules for a car turning right?

3 Answers
PaisleeLee
09/01/25 6:01am
When making a right turn, the driver must observe the traffic lights at the intersection. If the intersection only has circular red, yellow, and green traffic lights, the driver can proceed with the right turn directly. If there are arrow signal lights at the intersection, the driver must follow the arrow signals to make a right turn. A right turn is not allowed when the right-turn arrow signal is red. When the right-turn arrow signal turns off or changes to green, the driver can proceed with the right turn. If a traffic officer is directing traffic, the driver must follow the officer's instructions. Motor vehicles passing through an intersection controlled by traffic signals should comply with the following rules: When turning left, the vehicle should turn from the left side of the intersection center point, with the turn signal activated, and low beam headlights should be used at night. At intersections without directional signal lights, turning vehicles must yield to straight-moving vehicles and pedestrians, and right-turning vehicles from the opposite direction must yield to left-turning vehicles.
Was this review help?
7
5
Share
CamillaAnn
09/13/25 8:40am
I've always believed that the basic rules for making a right turn in a car are quite important. To summarize, it's all about looking more, yielding more, and turning slowly. When driving on the right side of the road and approaching an intersection to make a right turn, first check the traffic light—in some places, right turns on red are allowed but you must come to a complete stop and wait for pedestrians to cross, while on green you can proceed directly but must ensure no vehicles are trying to cut in. Turn on your indicator a few seconds in advance to alert vehicles behind you not to rush. It's best to keep your speed below 20 km/h, preferably not exceeding 30, to ensure a stable turn and avoid skidding. Checking blind spots is crucial—I always make it a habit to glance over my shoulder at the bike lane or sidewalk in case a cyclist or child suddenly appears. Safety comes first; never compete with through traffic as they have the right of way. These rules are generally universal, though local variations exist—for example, some cities completely prohibit right turns on red, requiring you to wait for a green light. Practice makes perfect; developing these habits ensures peace of mind while driving.
Was this review help?
18
2
Share
Expand All
Nguyen
10/28/25 2:37am
As a new driver, I was most nervous about right turns when I first started driving. My instructor kept nagging about the rules: At a red light, you must come to a complete stop before turning right, check both sidewalks, and yield to all pedestrians—this is an ironclad rule! Turn signals must be activated well in advance; don't flash them last minute, leaving others no time to react. Maintain a slow speed in low gear during the turn—going too fast risks losing control and causing accidents. Always watch out for e-bikes darting out by checking your blind spots. Traffic lights are the boss—green means go, red means stop—but if a sign says 'No Right on Red,' you must wait patiently. Experience taught me to observe more and act less impulsively, especially in busy downtown areas with heavy foot traffic. Right turns there are like slow dance steps—no rushing, just inching forward safely. Remember the yielding principle: through traffic always has the right of way, and we must give way. Over time, it becomes second nature, requiring no extra thought.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

What are the differences between the Excelle GT and Excelle XT?

The differences between the Excelle GT and Excelle XT are: 1. Different body dimensions: The Excelle GT has a body length, width, and height of 4671mm, 1815mm, and 1478mm respectively; the Excelle XT has a body length, width, and height of 4419mm, 1814mm, and 1487mm respectively. 2. Different curb weights: The Excelle GT has a curb weight of 1380kg; the Excelle XT has a curb weight of 1375kg. Both the Excelle GT and Excelle XT are equipped with a 1.6L naturally aspirated engine, producing a maximum horsepower of 121ps, a maximum power of 89kw, and a maximum torque of 150nm, paired with a 5-speed manual transmission.
14
2
Share

How to Reset the Maintenance Light on a Kia Sportage?

First, when it lights up, you should go to an authorized Kia service center for maintenance as soon as possible. The service technicians will use a diagnostic tool to reset the maintenance light after servicing. If you perform the maintenance yourself, you need to manually reset the maintenance light. The steps to reset the maintenance light on a Kia Sportage are as follows: 1. First, turn the Kia Sportage's power to the ON mode. 2. Then press the steering wheel's toggle button to switch to user settings, where you can see the maintenance settings. 3. Finally, press the OK button to enter the maintenance settings, and hold the OK button to reset the maintenance mileage and time to complete the process.
20
4
Share

Can 15w40 engine oil be used in sedans?

15w40 engine oil can be used in sedans. The grade of engine oil is established to distinguish different operating conditions in various environments. As long as the viscosity performance and various indicators of the engine oil meet the standards set by the original vehicle, it can be used. Introduction to engine oil: 1. 15w40 engine oil is a multi-grade oil, where 15W represents the minimum operating temperature of the oil, which is -25°C for 15W oil; while 40 represents the maximum operating temperature of the oil. The higher the number, the greater the viscosity and the higher the applicable maximum temperature. 2. Excessive oil viscosity can increase engine operating resistance and wear.
4
1
Share

How to adjust the headlights of a Cruze?

The method to adjust the headlights of a Cruze is as follows: 1. Locate the headlight height adjustment knob on the lower left side of the vehicle's center console. 2. You can set the headlight height according to the marked positions on the knob. 3. Rotate the knob to the "0" position for the highest headlight height. 4. The "1" position lowers the headlight height by one level. 5. The "2" position provides a relatively lower headlight height. 6. Rotating the knob to the "3" position sets the headlight height to the lowest level. Additional information about headlight adjustment is as follows: 1. Adjusting the headlights is only a remedial method, and it is not recommended to do it yourself. 2. Each vehicle's headlight height is preset, and the factory settings meet the standard requirements.
10
3
Share

What is the correct starting and shutdown procedure for the Audi Q5L?

Audi Q5 correct starting and shutdown steps are as follows: 1. The Audi Q5 one-button start is located to the left of the gear lever. The driver carries the key into the vehicle and can start the engine with a single button press without the traditional mechanical key-turn method; 2. To shut down the engine, simply press the button again. For one-button start models, press the start button while depressing the clutch. Additional relevant information: 1. The Audi Q5 is equipped with a Torsen AWD system, enabling a 40:60 power distribution to all four wheels, as evident from its elevated suspension and corresponding aerodynamic components. 2. The Audi Q5 also features high-tech electronic equipment such as height-adjustable air suspension and a hill descent control system.
1
4
Share

Is it okay to change engine oil without replacing the oil filter?

It is not okay to change engine oil without replacing the oil filter. The method for changing engine oil is: 1. Lift the vehicle, remove the protective plate, and place a container under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, tighten the oil drain plug after draining, and wipe it with a tissue to check for oil leaks; 3. Reinstall the protective plate, lower the vehicle, and add oil at the filler port. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and parts; 4. To buffer the pressure rise at the engine cylinder port; 5. To flush away dirt generated on the working surfaces of parts.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.