What are the requirements to become a T3 Mobility driver?

1 Answers
AubreyRose
07/29/25 4:29pm
In addition to the deposit, some prerequisites must be met to join. The conditions are as follows: 1. The driver must be between 22-55 years old, have local household registration or residence permit, and gender is not restricted; 2. Possess a driver's license of Class C or above, with at least 3 years of driving experience; 3. No accumulation of 12 penalty points in any of the last three consecutive scoring cycles; 4. No criminal record for offenses such as drunk driving, dangerous driving, or traffic accidents. Below is some information about T3 Mobility: T3 Mobility ensures transportation capacity supply through compliant physical operations. The vehicles are centrally purchased, customized, and intelligent new energy models, and all drivers undergo strict entry review.
Was this review help?
9
0
Share
More Forum Discussions

What does TSI at the back of a car mean?

TSI at the back of a car refers to a twin-charged engine. The functions of the engine are: 1. To fully combust the fuel input into the cylinders and generate power; 2. To determine the vehicle's power, fuel efficiency, stability, and environmental friendliness. The maintenance methods for the engine include: 1. Using qualified engine oil; 2. Using qualified coolant; 3. Regularly cleaning the water tank scale; 4. Regularly removing carbon deposits from the engine; 5. Timely replacing the vehicle's air filter, oil filter, and fuel filter; 6. Checking the condition of the spark plugs; 7. Maintaining normal engine speed. The principle of the engine is: 1. Mixing air and gasoline in a certain proportion to form a combustible mixture; 2. The intake stroke draws the mixture into the cylinder, where it is compressed, ignited, and burned to produce thermal energy; 3. The high-temperature, high-pressure gas acts on the top of the piston, pushing the piston to perform linear reciprocating motion, and the mechanical power is output externally through the connecting rod, crankshaft, and flywheel mechanism.
12
5
Share

What is the difference between automatic transmission and manual transmission?

Automatic transmission and manual transmission differ in the following aspects: 1. Operation: Automatic transmission does not require clutch operation, having only brake and accelerator pedals; manual transmission requires clutch operation for manual gear shifting and reversing. 2. Working principle: Automatic transmission uses planetary gear mechanisms for gear changes, automatically adjusting based on accelerator pedal position and vehicle speed; manual transmission changes gear positions and transmission ratios by moving the gear lever to alter gear engagement within the transmission. 3. Gear indicators: Automatic transmission gear indicators are marked as P, R, N, D; manual transmission gear indicators are marked as 1, 2, 3, 4, 5, 6, R, etc.
3
3
Share

Which car has square-shaped rearview mirrors?

Mercedes-Benz has square-shaped rearview mirrors. Mercedes-Benz: A German automobile brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, stringent quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous car and brand logos in the world. Mercedes-Benz cars not only have unparalleled quality but also a comprehensive range of models. Main production models: Currently, it mainly produces A-Class cars, C-Class cars (mid-range sedans and coupes), E-Class cars (high-end sedans and coupes), S-Class cars (luxury sedans and coupes), and G-Class vehicles (SUV off-road vehicles).
10
5
Share

What documents are needed for the first maintenance of a new car?

Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice. Take these to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with specific timing varying by vehicle, typically after driving 1,000 to 3,000 kilometers. The car must undergo its first maintenance promptly, neither early nor delayed. The completion of the first maintenance signifies the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two benchmark values for the first maintenance: mileage and time. Whichever comes first serves as the standard. First maintenance tasks include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and examining tires for damage or bulges. Required time: Approximately 2 hours to complete all tasks. The most crucial aspect of a new car's first maintenance is changing the engine oil and oil filter. When changing the oil, the oil filter must also be replaced. The choice of oil must refer to the "Vehicle Use and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It's important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or take them out, scrub with a brush and detergent, dry them, and then put them back. There are many vent holes under the rubber mats on the floor of the driver's compartment. Water entering these areas will not dry but will flow through the holes to the gearbox and other parts, causing erosion and corrosion. The best practice is to clean with a vacuum and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the antifreeze and add the same brand from the start. Since antifreeze brands differ, their chemical properties vary greatly. Various functional additives can corrode others. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function properly again. To prevent rust on wheel bolts and nuts, some apply lubricant, but this poses a safety risk. At high speeds, bolts and nuts can loosen or even fall out, leading to driving malfunctions. Do not press the accelerator when starting an EFI car: The starter of an EFI car differs from that of a regular car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring smooth starting.
16
5
Share

What does 'driving a few yards' mean?

As a unit of speed, 1 yard is equal to 1 kilometer per hour. Converted to meters per second, it should be 0.2778 m/s. As a unit of length, 1 yard is equal to three feet, which is 0.9144 meters. In modern colloquial usage, 'yard' is often used as a unit of speed, typically for the speed of vehicles, especially cars. Origin: A speed of 40 yards is equal to 64 km/h. The common expression of speed in 'yards' originates from the speed unit 'mile.' One mile is equal to 1 mile per hour, which converts to approximately 1.6 kilometers per hour in the metric system. International Metric System: Internationally, the metric system is commonly used. For example, a speed of 100 yards is equal to 100 kilometers per hour. When British people say 100 miles, it equals 160 kilometers per hour. In reality, 'mile' refers to Mile (mile), where 1 mile = 1.6 kilometers. Therefore, strictly speaking, 40 miles equals 64 km/h.
17
5
Share

Is Transmission Fluid Considered a Lubricating Oil?

Transmission fluid is not classified as a lubricating oil. Engine oil serves as the lubricant for the engine system, possessing properties such as oxidation resistance, wear resistance, and anti-corrosion. In contrast, transmission fluid is primarily designed to maintain the cleanliness of the gear system and extend the service life of internal transmission components. Due to the distinct structures and operating environments of transmissions and engines, transmission fluid cannot be used as engine oil, nor can engine oil be substituted for transmission fluid. Symptoms indicating the need for transmission fluid replacement include: vehicle shaking, gear shifting hesitation; the appearance of a transmission overheating warning on the dashboard; vehicle stalling; and unusual noises. The methods for replacing transmission fluid are as follows: Unscrew the drain plug at the bottom of the transmission to drain the old fluid before refilling. Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it allows for the removal of debris from the bottom of the oil pan. Use a circulation machine to replace automatic transmission fluid: Dynamic fluid replacement with an intelligent circulation machine can filter and clean out sludge and debris inside the automatic transmission. Hazards of prolonged failure to replace transmission fluid include: 1. Damage to the transmission's shift control mechanism; 2. Abnormal wear of gears and clutch plates inside the transmission; 3. Impaired transmission operation, leading to damage of the transmission valve body.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.