What are the requirements for upgrading to an A2 driver's license?

1 Answers
Archer
07/30/25 9:42am
Upgrading to an A2 driver's license requires the following conditions: 1. Condition 1: Hold a "B1 medium-sized bus" or "B2 large truck" driving qualification for more than three years, with no full-point record in the last two scoring cycles before application. 2. Condition 2: Obtain an "A1 large bus" driving qualification for more than one year, with no full-point record in the last scoring cycle before application. 3. Condition 3: Drivers aged between 24 and 50 years old with a normally valid driver's license can apply to the local vehicle management office at their registered residence to add the permitted driving type.
Was this review help?
4
1
Share
More Forum Discussions

Which is more common among luxury cars: manual or automatic transmission models?

Luxury cars with automatic transmission are more common than those with manual transmission. Here are the characteristics of luxury cars: 1. Sufficient body size: The wheelbase must be at least 2.5 meters, and the total vehicle length should exceed 4.5 meters, with a width of at least 1.7 meters. 2. Powerful engine: Luxury cars usually come with a 6-cylinder engine, but to make a nearly 2-ton behemoth move swiftly, an 8-cylinder or larger engine is required, with an engine power of at least 110 kW. 3. Comprehensive safety features: Luxury cars have higher requirements for safety features. They must be equipped with anti-lock braking systems, traction control systems, airbags, and other passive safety features, as well as appropriately designed crash buffer zones. Every detail inside the car must prioritize safety, using laminated safety glass or bulletproof glass. Doors must maintain sufficient strength during a collision and should be easy to open after an accident.
16
3
Share

Are There Restrictions for Hebei License Plates Entering Beijing?

There are restrictions. Hebei license plates entering Beijing require an entry permit. During the COVID-19 pandemic in 2021, vehicles from Hebei also needed to provide a negative nucleic acid test certificate, while complying with Beijing's traffic restriction policies. Below is additional information: 1. Introduction: The Beijing Entry Permit is a temporary pass required for non-Beijing licensed vehicles entering areas within the Sixth Ring Road (excluding) and certain sections outside the Sixth Ring Road. It is valid for 7 days. An extension of 5 days can be applied for at the local traffic police station one day before, on the day of, or one day after the permit's expiration. 2. Required Documents for Application: According to regulations, the following documents are needed to apply for the Beijing Entry Permit: driver's license, vehicle registration certificate, ID card, compulsory traffic insurance policy, and a valid vehicle inspection sticker. However, in practice, only the driver's license, vehicle registration certificate, and ID card are required. The driver's license and ID card must belong to the same person (who does not have to be the vehicle owner), and the ID card holder must apply in person.
9
2
Share

How long after drinking Rio can you drive?

You need to wait until the alcohol is metabolized after drinking Rio before driving, which typically takes about 6-12 hours. Although Rio has a low alcohol content, it is still considered an alcoholic beverage and contains a certain amount of alcohol. After drinking Rio, the blood alcohol concentration (BAC) will increase. If the driver's BAC is greater than or equal to 20mg/100ml, it is considered drunk driving. Below is relevant information: 1. Drunk Driving: Drunk driving refers to operating a motor vehicle while completely or partially losing personal will due to alcohol consumption. A BAC greater than 20mg per 100ml is considered drunk driving. If the driver's BAC is greater than or equal to 80mg/100mL, it is classified as severe drunk driving. 2. Drunk Driving Risks: The stimulation from alcohol can make people excited, leading them to drink more than they realize. When the alcohol concentration in the blood reaches a certain level, a person's reaction and control abilities decline, along with their ability to handle emergencies. For drunk drivers, the higher the BAC, the greater the risk of a collision.
6
3
Share

What are the tire model specifications for the Odyssey?

The Odyssey comes with two tire model specifications: the 215/60R17 tires for the Sharp·Intelligent Edition and the 225/50R18 tires for the Sharp·Premium Edition. In the 215/60R17 specification, the first number 215 indicates the tire width is 215mm, 60 represents the aspect ratio of 60% (meaning the sidewall height is 60% of the width), and 17 denotes the rim diameter of 17 inches. The letter "R" stands for radial tire. In the 225/50R18 specification, the first number 225 indicates the tire width is 225mm, 50 represents the aspect ratio of 50% (meaning the sidewall height is 50% of the width), and 18 denotes the rim diameter of 18 inches. The letter "R" stands for radial tire. The Odyssey features stylish silver-and-black multi-spoke alloy wheels paired with Yokohama ADVAN dB decibel series tires. None of the trims come with a spare tire as standard. If you need to replace the tires yourself, follow these steps: Retrieve the spare tire and jack. Position the jack under the vehicle frame near the tire to be replaced, ensuring it contacts the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and you should check to ensure it is perpendicular to the ground. Remove the hubcap and loosen the lug nuts counterclockwise. Do not fully remove them yet—just loosen enough to reduce resistance. Keeping the tire on the ground while initially loosening ensures the nuts turn rather than the tire. Continue turning the nuts counterclockwise until they are loose, then remove all lug nuts completely. Place the new tire onto the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and hand-tighten them until all nuts are snug. The tire replacement is now complete. In addition to the model specifications, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord. Speed rating: Indicates the maximum speed the tire can sustain under specified conditions. Letters A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specifications: Indicate the compatible rim size for the tire, such as "Standard rim 5.00F."
7
3
Share

What are the model specifications of Civic tires?

The tire models for the Civic are 215/50R17 and 215/55R16. In 215/50R17, the first number 215 represents the tire width of 215MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 17 represents the rim diameter of 17 inches. The middle letter "R" stands for radial tire. In 215/55R16, the first number 215 represents the tire width of 215MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 represents the rim diameter of 16 inches. The middle letter "R" stands for radial tire. The original factory tires for the Civic are Yokohama tires. Yokohama Tire was founded in 1917, with the English name Yokohama, and is also known as Yokohama Tire in China. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle. Check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise. Do not completely loosen the nuts; just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn, not the tire. Turn the nuts counterclockwise until they come off. Repeat this step for all lug nuts and completely remove the nuts; Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, tires also have the following common markings: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
9
3
Share

How to Turn Off the Rear Seat Belt Reminder?

Insert the seat belt into the buckle to deactivate the rear seat reminder. Here are detailed instructions: 1. Correct way to fasten rear seat belts: The shoulder strap should cross the chest cavity, and the lap belt should fit snugly against the hip bones. This ensures impact forces are absorbed by the skeletal structure rather than internal organs. 2. A 'click' sound indicates proper engagement - always verify the belt is securely fastened. 3. Avoid routing seat belts over fragile items like eyeglasses. 4. Children cannot use regular seat belts - those under 12 years require dedicated child safety seats.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.