What are the requirements for upgrading from a Class C to a Class A driver's license?

2 Answers
StGriffin
07/24/25 3:39pm
C license cannot be directly upgraded to an A license. You must first upgrade to a B license before applying for an A license upgrade. Requirements for upgrading from a C to a B license: To upgrade from a C to a B2 license, you must have held the C license for at least one year, with no record of accumulating 12 penalty points in the most recent scoring cycle before the upgrade. To upgrade from a C to a B1 license, you must have held a Class C driver's license for at least three years, with no record of accumulating 12 penalty points in the two most recent consecutive scoring cycles before the upgrade. Additionally, you must have no record of drunk driving, no record of being primarily or fully responsible in a fatal accident, and be between 21 and 50 years old. Requirements for upgrading from a B to an A license: The requirements for upgrading from a B to an A license are similar to those for upgrading from a C to a B license. To upgrade to an A3 license, you must have held a B license for at least one year; for an A2 license, at least three years; and for an A1 license, at least five years. Additionally, there is a requirement of not exceeding 12 penalty points in the corresponding period.
Was this review help?
18
4
Share
SanAaliyah
08/11/25 8:43am
I've been driving small cars for many years, and later I thought about upgrading to a large passenger vehicle license, which is called an additional license. It's quite complicated. First, you must be at least 24 years old—this rule isn't arbitrary, as driving large vehicles requires sufficient maturity. Second, you need to have held your current Class C license for several years, say at least three, with no record of accumulating 12 penalty points during that period—things like speeding must be avoided. You also need to ensure no major accidents, as safety always comes first. The exam process is even more troublesome: the theoretical part tests details of traffic laws, while the practical part requires passing various large vehicle driving tests—maneuvers like turning and reversing are much harder than with small cars. I recommend consulting a proper driving school in advance and preparing with practice, spending extra time to get familiar with the feel of large vehicles. Don’t rush; take it step by step—safety is more important, and if you fail, you’ll have to wait longer. The whole process is tough, but the sense of achievement after success is truly rewarding.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

How Long Can a New Energy Commercial Vehicle Be Used After Being Converted to Non-commercial Use?

Commercial vehicles converted to non-commercial use can still be used according to the stipulated scrapping time for commercial passenger vehicles. Below are the usage time regulations for commercial vehicles and the scrapping age regulations for vehicles with changed usage nature: Usage time regulations for commercial vehicles: Mini commercial passenger vehicles can be used for 10 years, large or medium commercial passenger vehicles for 15 years, small or mini taxi passenger vehicles for 8 years, medium taxi passenger vehicles for 10 years, and large taxi passenger vehicles for 12 years. Scrapping age regulations for vehicles with changed usage nature: For commercial passenger vehicles and non-commercial passenger vehicles converted to each other, scrapping follows the regulations for commercial passenger vehicles. For different types of commercial passenger vehicles converted to each other, scrapping follows the usage time regulations. Small or mini taxi passenger vehicles and motorcycles that need to be transferred out of the province, autonomous region, or municipality where they are registered will be scrapped according to the stricter usage time regulations. For hazardous material transport trucks and semi-trailers converted to other trucks or semi-trailers, scrapping follows the regulations for hazardous material transport trucks and semi-trailers.
7
3
Share

What Causes Intermittent Wiper Operation?

You can identify the cause by checking the following aspects: 1. Inspect the wiper motor: After opening the car hood, you can see the wiper motor. Touch the motor with your hand; if it feels scalding hot, it indicates an internal short circuit in the motor. Replacing the motor will solve the problem. 2. Check the wiper fuse: To protect the car's wiring, each electrical device is equipped with a fuse. Check if the wiper fuse is blown and replace it with a spare fuse from the car. 3. Examine the wiper switch: Although the wiper switch is not used frequently, car electronics can be inherently unstable. If no issues are found in the above checks, consider that the wiper switch might be faulty. You can use a multimeter to test the switch or simply replace it with a new one for testing. 4. Inspect the wiper wiring: Checking the wiring is a more complex and time-consuming task. You need to be proficient in using an automotive multimeter to measure voltage, resistance, and current, and combine this knowledge with practical application to locate the wiring fault causing the wipers to malfunction.
8
2
Share

Is it necessary to use turn signals for autonomous lane changes?

Autonomous lane changes require the use of turn signals. Introduction: Turn signals are important indicator lights that are activated when a motor vehicle changes direction to alert surrounding vehicles and pedestrians. The turn signal bulbs use xenon tubes, controlled by a microcontroller circuit, which flash alternately left and right without interruption. Turn signals utilize flashers to achieve the blinking effect. They can mainly be categorized into three types: resistance wire type, capacitor type, and electronic type. Structural Principle: The resistance wire type can be further divided into thermal wire type (electrothermal) and wing type (spring-loaded), while the electronic type can be subdivided into hybrid type (relay with contacts and electronic components) and fully electronic type (no relay). For example, the spring-loaded flasher operates on the principle of thermal expansion and contraction, using the heat generated by electric current to cause sudden movements in the spring strip, thereby connecting and disconnecting the contacts to achieve the blinking effect.
4
2
Share

What are the techniques to prevent steering wheel deviation during gear shifting?

Techniques to prevent steering wheel deviation during gear shifting are as follows: 1. Develop a habit of shifting gears gently: Practice regularly and avoid excessive force when holding the steering wheel. Maintain a light and smooth grip, and find the right feel when controlling the direction. During gear shifting, keep your left hand steady on the wheel without moving, while your right hand shifts gears gently. This effectively prevents the right hand's excessive force from affecting the left hand's stability. 2. Memorize the gear positions: Familiarize yourself thoroughly with the gear positions, engraving them in your mind to ensure accurate shifting. Always look ahead when shifting gears and avoid looking down at the gear lever. 3. Master the timing of gear shifting in manual transmission vehicles: Accurately grasping the timing of gear shifting ensures smooth and effortless shifting, allowing you to complete the action gently and precisely.
13
5
Share

Should the AC be turned off after the car is turned off?

After the car is turned off, the AC should be turned off. If the AC is not turned off before the car is turned off, the car's air conditioning will automatically turn on the next time the car is started, which can cause damage to the battery. Below is an introduction to the functions and usage methods of the AC switch. Functions of the AC switch: The AC in a car is the compressor switch for the car's air conditioning, also known as the cooling switch. The function of the AC is to cool, heat, ventilate, and purify the air inside the car, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. Usage methods of the AC switch: In the hot summer, when the AC button is turned on, the temperature control should be adjusted to the blue position. For automatic air conditioning, a temperature can be set, and then the AUTO button can be pressed, allowing the automatic air conditioning to adjust the interior temperature automatically. In winter when using the heater, the driver does not need to turn on the AC switch.
13
2
Share

How many days after obtaining a temporary license plate can a new car get a formal license plate?

New cars can obtain a formal license plate approximately one week after getting a temporary license plate. Temporary License Plate: Temporary license plates are valid for 15 days within the city and one month outside the city. Moreover, new cars must not use temporary license plates for more than 15 days. A temporary license plate is a provisional vehicle driving certificate issued by the vehicle management department of the public security authorities when a car has not yet been formally registered due to pending procedures. Formal License Plate Regulations: The "Road Traffic Safety Law of the People's Republic of China" clearly stipulates that vehicles must display license plates as required when driving on roads, and failure to do so will result in penalties. However, before obtaining a formal license plate, it is mandatory to apply for a temporary motor vehicle license plate in accordance with regulations to drive on roads. New cars must not use temporary license plates for more than 15 days, and owners should promptly apply to the vehicle management authority for a formal license plate.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.