What are the requirements for tires in vehicle annual inspection?

1 Answers
AdelynMarie
09/03/25 3:52am
Vehicle annual inspection has the following requirements for tires: no excessive wear, tire tread patterns must be consistent, four-wheel tread patterns should match or at least the front two and rear two should match, but left and right inconsistency is not allowed. Annual inspection refers to the annual or biennial safety inspection of vehicles, which includes comprehensive checks on components such as horns, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation. Several factors that may affect the annual inspection include: 1. Modification of vehicle appearance or external dimensions; 2. Non-standard license plates; 3. Improper use of lighting; 4. Unauthorized painting or modification of the vehicle body; 5. Unauthorized alteration of vehicle logos.
Was this review help?
12
1
Share
More Forum Discussions

Is the Golf produced by Shanghai Volkswagen or FAW-Volkswagen?

The Golf is produced by FAW-Volkswagen and is a compact two-door family car. Taking the Golf 2021 200TSI DSG as an example, its body dimensions are: length 4296 mm, width 1788 mm, height 1471 mm, with a wheelbase of 2636 mm, a fuel tank capacity of 51 liters, and a trunk capacity of 380 liters. The Golf 2021 200TSI DSG is equipped with a 1.2L 4-cylinder turbocharged engine, delivering a maximum horsepower of 116 hp, a maximum power of 85 kW, with the maximum power achieved at 5000 rpm, a maximum torque of 200 Nm, and the maximum torque available between 2000 to 3500 rpm. It is paired with a 7-speed dual-clutch transmission.
2
1
Share

What are the potential damages caused by car atomization disinfection?

Complex operation, excessively long disinfection time, severe interior pollution leading to suboptimal effectiveness, and potential adverse effects of steam on the vehicle's electronic systems are some concerns. Below is relevant information: Chemical disinfection: This method primarily involves spraying and wiping car components with disinfectants to eliminate pathogens through chemical reactions. This sterilization approach is simple to operate and achieves thorough pathogen elimination. Common chemical disinfectants on the market include peracetic acid and 84 disinfectant. While this method provides thorough disinfection, it leaves behind odors in the cabin post-treatment, requiring ventilation for a period. Ozone disinfection: Ozone disinfection machines utilize specialized automotive equipment that rapidly generates large quantities of ozone for disinfection purposes. Ozone serves as a highly efficient broad-spectrum rapid sterilizer capable of eliminating various pathogens and microorganisms. When reaching specified concentrations, disinfection and sterilization can be completed swiftly.
17
1
Share

What is the difference between a light motorcycle and a heavy motorcycle?

Different names: Heavy motorcycles, also known as motorcycles, originate from the term used in Taiwan; another interpretation refers to motorcycles with larger displacements. Power differences: Generally, motorcycles with a displacement of over 50cc or horsepower exceeding 40, and a maximum speed over 45 kilometers per hour, can be called heavy motorcycles. Weight differences: Heavy motorcycles are generally heavier, such as the Harley-Davidson V-Rod model, which weighs up to 660 pounds. In contrast, regular motorcycles are lighter. More related information is as follows: Heavy motorcycles: Heavy motorcycles are the abbreviated term for heavy-duty motorcycles. "Motorcycle" is a term used in Taiwan, referring to two-wheeled or three-wheeled motor vehicles powered by an engine. Definition: The term "heavy motorcycle" has two definitions. The first definition is "heavy motorcycle" as classified in Taiwan's relevant regulations. The second meaning refers to the commonly understood heavy-duty motorcycles.
4
3
Share

Why Does Tire Pressure Decrease?

Tire pressure may decrease due to the following 5 reasons: 1. Punctured tire: Generally, if the puncture hole diameter is less than 6mm and not located on the tire sidewall, it can be repaired. The most effective repair method is using a mushroom plug. If the puncture exceeds 6mm in diameter, tire replacement is necessary. 2. Slow air leakage: Natural tire aging or prolonged vehicle parking may cause gradual air loss. Inflate to normal pressure range or replace the tire. 3. False alarm from TPMS: Measure actual tire pressure with a gauge when tires are cold. If the measured pressure is within normal range, it indicates a TPMS false alarm. 4. Vehicle consistently carrying overweight loads, causing uneven tire stress. 5. Normal pressure reduction due to thermal contraction (temperature changes).
8
2
Share

What to Do When the Car Air Conditioner Emits a Foul Odor?

Solutions for a foul odor when the car air conditioner is turned on include: 1. Place fruits with strong adsorption capabilities like grapefruit peels, pineapples, and lemons in the car; 2. Use white vinegar in the car for its sterilizing and cleaning properties; 3. Utilize activated charcoal to remove odors; 4. Remove protective films inside the car; 5. Open windows for ventilation; 6. Spray an appropriate amount of air freshener. The reasons for a foul odor when the car air conditioner is turned on are: 1. Overheated wires or short circuits in electrical components; 2. Dirty air conditioner filters or air ducts; 3. Malfunctioning tires or rubber belts, producing a burnt rubber smell; 4. Damaged fuel tank or leaks in the fuel supply system; 5. Leakage or shortage of electrolyte; 6. Burnt clutch plates or failure to release the handbrake.
20
0
Share

Should You Shift to D Gear or Release the Handbrake First When Starting an Automatic Transmission Car?

Generally, you should shift gears first and then release the handbrake last. It is essential to keep your foot on the brake pedal, and reversing the order is not a big issue. However, it is crucial to remember not to forget to release the handbrake and avoid starting the car with the brake engaged, as this can burn out the handbrake pads. If you are a beginner and not yet accustomed to the process, you can release the handbrake first to avoid forgetting after starting. Additional relevant information is as follows: When shifting gears: Shift from P to D quickly to prevent a reverse impact when passing through R, which can be harmful to the transmission. Safe starting method: Press the foot brake, shift to D gear, release the handbrake after shifting, then release the foot brake, and finally press the accelerator to start.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.