What are the requirements for tires during vehicle inspection?
4 Answers
The requirements for tires during vehicle inspection are: 1. Tires must be intact without severe damage; 2. Tire specifications must remain consistent with matching tread patterns. Precautions for vehicle inspection include: 1. No modifications to the vehicle's exterior appearance, engine, braking system, or wheel hubs; 2. Window tint film should not be excessively dark; 3. License plates must remain clearly visible without using detachable license plate frames. The vehicle inspection process consists of: 1. Exhaust emission testing; 2. Visual inspection of the vehicle body, light covers, and tires for damage, checking for unauthorized modifications; 3. Testing lights, brakes, chassis, and horn; 4. Reviewing vehicle specifications; 5. Receiving the motor vehicle inspection compliance mark.
The annual vehicle inspection has strict requirements for tires. From a safety perspective, having driven for many years, I know that the tread depth must be at least 1.6 mm, which is the minimum standard. Otherwise, braking distance increases, and accidents are more likely to occur on wet or slippery roads. Tire pressure should be maintained at the manufacturer's recommended value, as being too high or too low can affect handling and fuel consumption. Tires must not have cuts, bulges, or aging cracks, as these hazards are carefully inspected during the annual inspection. I recommend regularly testing the tread depth by inserting a one-yuan coin into the grooves; if too much of the coin is exposed, it's time to replace the tires. Additionally, the tire specifications must match the original vehicle setup—avoid arbitrary modifications. Remember, these measures aren’t just for passing inspections but also for protecting your safety. It’s best to perform a self-check every six months.
I understand the annual inspection regulations. The tire tread depth must be no less than 1.6 mm, and the tire pressure should be within the normal range, specifically referring to the vehicle manual or door sticker. The tire surface must not have any damage such as cuts or bulges, otherwise it will be deemed a safety hazard. The size must match the original factory specifications, and excessively modified tires may be rejected during inspection. I also noticed that uniform wear is emphasized during the annual inspection. Severe uneven wear might indicate wheel alignment issues. Neglecting these requirements can easily lead to failure, so daily maintenance is crucial.
Common tire issues during annual inspections are excessive wear or underinflation. My friend failed the inspection last year due to shallow tread patterns. It's important to regularly monitor tire condition: use a tool or coin to measure tread depth and avoid the risk of blowouts caused by low tire pressure. If cracks or bulges are found, replace the tires promptly. For simplicity, just schedule regular checks at an auto repair shop.
